Table of Contents
To measure for blind length, take the same approach using the metal tape measure from the top of the recess to the windowsill at 3 points and note the narrowest point. For vertical blinds, we recommend you reduce the length by 1cm to prevent the fabric from catching on the sill.
How do I know what size blinds to buy?
Measuring for Horizontal Blinds Measure exact window width at top, middle, and bottom. Use the narrowest width. Do not make any deductions – provide the exact measurements of the narrowest width. Measure exact window height at left, middle, and right side. Use longest height.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
Do blinds have to fit exactly?
Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening. If the shades are installed outside of the window opening — called an outside mount — the shades typically are wider than the window by a few inches and can also be longer than the window.
What is the standard blind size?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
What do you do when your blinds are too short?
Mounting Window Blinds That Are Too Short A few options to cover this gap is by adding a larger custom valance, a cornice, or drapery above the blinds. If you are handy you could even mount wooden valance boards at the top and paint or stain them to match the horizontal blinds.
How do you measure for ready made blinds?
Use a metal tape measure for accuracy. Measure across the window width, adding an extra 10cm (4″) to the total width to allow a 5cm (2″) overlap either side of the window to block out light effectively. For roller blinds add a further 5cm (2″) to the width to allow room for the operating mechanism.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
What is common blind width?
Blind Slat Sizes Common slat widths are 1/2 inch, 1 inch, or 2 inches, which is the most popular width. Smaller slats look proportionate on smaller windows, and they offer a more subtle look that blends in with the surroundings.
How wide can a single blind be?
As you measure your windows, you may find a window opening or two that are very large widths. Payless Decor blinds and shades have maximum widths that can be six, seven, or eight feet or longer, and thus can cover many large openings. Aug 6, 2012.
Can blinds be longer than window?
In most cases, it is OK to have your blind longer than your window, even for inside mount. If you order the shade too long, it may not align properly when lowered to the sill of your window. Measuring a Window for Inside Mount. An inside mount blind should fit the window measurements perfectly.
How far out should blinds be from window?
Not Adding Width To Outside Mount Blinds We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
How deep should inside mount blinds be?
3⁄4″ is the minimum depth required for inside mount blinds.
How are IKEA blinds measured?
Measure across the width of the roller blind, along the top edge. Draw a line with the marker at the point on the roller that’s equal to the width of your window. Also measure along the bottom edge of the blind and make a second mark at the point that equals the width of your window.
How do I measure for replacement window shades?
Measure the width of each window. Measure your width only at the top of the window for roller shades. Measure the height of your window opening in three places: left, center, and right. Circle the tallest measurement – this is the number you submit for your window’s height.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
Can you add length to blinds?
Slats can be added to a blind as long as extra ladder strings exist at its bottom. Adding slats to wood, faux wood, aluminum or vinyl blinds allows homeowners to extend the blind’s length. It is possible to add slats to a blind only when unused ladders exist at the bottom of the blind.
