Table of Contents
How do I know what size fluorescent tube I need?
Fluorescent tubes are measured in eighths of an inch. A T8 has a one inch (8/8 inch) diameter, a T5 has a 5/8 inch diameter, and a T12 is a 12/8 inch (1.5 inch) in diameter.
What are the sizes of fluorescent bulbs?
While there are multiple types of LED and fluorescent tube lights, the three most common are T12, T8 and T5. The terminology comes from “T” for “tubular” and the diameter of the bulb in eighths of an inch, so “T8” represents a tube of 8/8ths of an inch, or 1 inch.
What are the standard sizes of fluorescent tubes?
Fluorescent circline tubes are typically 1 and 1/8 of an inch in diameter. Their outside diameter (which is measuring the circle from one end to the other) comes in four options – 6, 8, 12, and 16 inches.
How is light bulb length measured?
To correctly measure the length of your light bulb, measure from the top of the glass or plastic bulb to the very tip of the base using a ruler or measuring tape.
How do I know if I have T8 or T12?
If no markings are available, the size in diameter of the tube is the easiest way to determine the type you have installed. T8 tubes are 1-inch in diameter and T12 tubes are 1 1/2 -inch.
Will a T8 fit in a T12 fixture?
T8 tubes are simply 1 inch in diameter versus the 1.5 inch diameter of T12 tubes. In an effort to make LED tube lights compatible with the internal dimensions of most fixtures, you will find that most LED tube lights feature a T8 or 1 inch diameter. They can indeed be used in T12 fixtures.
What’s better T5 or T8?
The T5 has a better lumen-to-watt ratio than the T8, implying that its output is more efficient and brighter per watt of energy used.
What is difference between T5 and T8 fluorescent?
The major physical difference between T5 and T8 light bulbs is the length and diameter of the tube itself. The T5 tends to be slightly shorter than the T8 tube, and is significantly smaller in diameter. This factor is important to consider when looking at your fixture, because the two tubes are not interchangeable.
Can I replace fluorescent tubes with LED?
Yes, you can replace fluorescent tubes with LED tubes or LED-integrated fixtures. If you just want to replace the bulbs, you can use plug-and-play, direct-wire, or hybrid LED tubes. Plug-and-play tubes are the easiest to install as they do not require any rewiring to the fixture.
What do the numbers on a fluorescent tube mean?
Lamps are typically identified by a code such as FxxTy, where F is for fluorescent, the first number (xx) indicates either the power in watts or length in inches, the T indicates that the shape of the bulb is tubular, and the last number (y) is the diameter in eighths of an inch (sometimes in millimeters, rounded-up to.
What size is a T5 tube?
The T5 Fluorescent Tube is often referred to as a miniature fluorescent tube as it has a diameter of only 15mm. We stock the full range of these replacement T5 linear lamps in the wattages ranging from 4 Watts to 80 Watts and lengths starting at 150mm and increasing to 1500mm.
What is the difference between T5 T8 and T12?
So a T5 is 5/8ths of an inch, a T8 is exactly one inch thick (i.e. 8/8ths) and a T12 is 12/8ths or one and a half inches thick.
Is T5 the same as G5?
Fluorescent G5 tube base types are a two pin fitting located at each of the tube with 5mm between the two pins. The T5 (16mm tube diameter) and T4 (12mm tube diameter) uses the G5 cap fitting.
Is T8 the same as G13?
A T8 tube is also called a TL-D tube from Philips and a Lumilux tube from Osram. You can recognize a T8 tube from it’s 28mm diameter. The socket is called G13 this because the 2 pins are 13mm apart from each other. . A T8 tube can work on an electronical ballast using a fixture without a starter.
What is the difference between T4 and T5 tubes?
There are many types of fluorescent lights available but the main difference between the T4 and T5 lights are their efficiency or their watt consumption and lumen output, as well as the thickness of the tubes. The T4 has a half-inch diameter, while the T5 is five-eighths of an inch.
Is my ballast T8 or T12?
Replace Current Lamp You will see either T8 or T12 stamped on one side near the end with the prongs. You also will see the lamp’s rated wattage, usually 32 watts for T8 and 40 watts for T12. Measure the diameter of the lamp. T12 lamps are larger than T8 lamps, with a 1 ½-inch diameter.
Can you put T8 bulbs in a T12 ballast?
In terms of physical compatibility, both T8 and T12 lamps use the same G13 bi-pin base, so as long as they are the same length (e.g. 4-ft), a T8 lamp will physically fit inside a T12 fixture.
Can a T8 tube replace a T12?
The easiest and lowest price option to replace a T12 is a T8 linear fluorescent. They have become the go-to option for pre-existing T12s. If you still have magnetic ballasts, switching to a T8 will require a ballast swap.
Are T12 bulbs being discontinued?
In effect since July 2012, the legislation eliminates nearly all 4-foot T12 lamps, some 4-foot T8 lamps, most 8-foot T12 lamps, and almost all standard halogen PAR38, PAR30 and PAR20 lamps from the market. T12 technology is over 80 years old. Since that time, lamps and bulbs have been developed that just work better.
Are T8 or T12 bulbs brighter?
The Standard T12 lamp produces 2,650 initial lumens per lamp. The standard T8 produces 2,800 initial lumens per lamp, 6% brighter. But the standard T12 lamp produces 2,300 design lumens and the T8 produces 2,660 design lumens. Design Lumens are the average lumen output of the lamp after 40% of its rated life.
How do I know what type of ballast I have?
You can determine whether you have a compatible fixture in seconds. Simply turn the light on, then take a photo of the fixture using your smartphone or digital camera. If there are no dark bands on the resulting image, you have an electronic ballast that will work with direct drop-in LED tubes.
