Table of Contents
Here’s how to measure: Measure the width of the window opening from outside edge to outside edge of the window casing. Add 6″ to each side (12″ total). Take the total number (your measured width plus what you added to each side), and divide it by the number of panels you want to order.
How do I know what size drapes to buy?
Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.
How is curtain size measured?
Measuring Curtains Measure the full width of the curtain pole or track not the window, excluding any fixtures or finials on the ends. If your curtains are pencil pleat, tab top or eyelet, double this width measurement to account for the way the curtains will be ‘gathered’ at the top.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How much wider should curtains be than the window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod.
When buying curtains is the width per curtain?
The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
Do curtains have to touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
What are standard curtain sizes?
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don’t look right in most scenarios and end up being an awkward length,” says Curtis.
How do you read curtain sizes in Australia?
Measure from the top of the window to the floor. You need to buy curtains that have a length at a min 8cm greater. You will be hanging the rod above the window, and the height above the window will depend on the length of the curtain. Just make sure the length of the curtain is at a min 8cm longer.
How wide should curtains be for 100 inch window?
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
How wide should curtains be for 75 inch window?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How wide should curtain panels be?
How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.
Do eyelet curtains need to be double width?
Buying the Correct Size Measuring for ready made eyelet curtains is very simple. Double the width to determine the total curtain width you need for your window. If you are using just one curtain and pulling it to one side, then the total width of this one curtain should be close to the number you just calculated.
How long should curtains hang below window sill?
Just over sill length Take the hem of the curtain to just above the radiator, or up to about a maximum of 4 inches (10cms) below the sill.
Are curtains measured width by length?
Most ready-made curtains come in these widths: 117cm (46”), 168cm (66”) or 228cm (90”). To work out which one you need, measure the length of the rail or pole (between the finials), not the window. This measurement is the width of each curtain and means they’ll have a lovely, full gather even when closed.
When buying curtains do they come in pairs?
While it may seem logical that curtains should come in sets of two, curtains do not always come in pairs. They most often come in panels. Panels are a single piece of fabric or one curtain. If you want a typical curtain pair, you will need to buy two panels.
When should curtains touch the floor?
In formal or dressy rooms, curtains should just touch the floor. A romantic room deserves elegant, extra-long curtains that pool or puddle on the floor. Curtains to the sill, or to the bottom of the window trim (called the apron), look great and are practical in a kitchen.
Should bedroom curtains touch the floor?
Like most other rooms, curtains should extend to the floor (give or take an inch). In the bedroom, curtains should only be short when something would interfere with their ability to reach the floor. For example, the headboard of a bed or a radiator placed under the window.
How far above floor should curtains hang?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.
What are common curtain widths?
What Are The Standard Curtain Panel Sizes? [Height and Width] Curtain panels: 63, 84, 95, 108, and 120 inches long and 48 inches wide. Tier curtain panels: 24 and 36 inches long with widths varying in size, but the most common width is 45 inches. Valance curtains: 50 inches wide and anywhere from 3 to 5 inches deep.
