Table of Contents
Measuring Curtains Measure the full width of the curtain pole or track not the window, excluding any fixtures or finials on the ends. If your curtains are pencil pleat, tab top or eyelet, double this width measurement to account for the way the curtains will be ‘gathered’ at the top.
How do you measure what size curtains you need?
Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
Do you measure curtains in inches?
It is advisable to use a metal tape measure were possible when measuring for curtains. The width is always the first measurement given, for example 46”x 54” (117cm x 137cm) means that each curtain is 46 inches (117cm) wide by 54 inches (137cm) drop.
When buying curtains is the size per curtain?
All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.
How much wider should curtains be than the window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod.
How wide should curtain panels be?
How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.
Do eyelet curtains need to be double width?
Buying the Correct Size Measuring for ready made eyelet curtains is very simple. Double the width to determine the total curtain width you need for your window. If you are using just one curtain and pulling it to one side, then the total width of this one curtain should be close to the number you just calculated.
Do curtains have to touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
What is 168×183 curtains in inches?
Size 168cm (66 inches) wide by 183cm (72 inches) drop. Width refers to one curtain panel before hanging. Eyelet diameter: 4cm.
How are ready made curtains measured?
Ready-made curtains are available in three standard widths: 112 cm (44 inches), 167 cm (66 inches) or 228 cm (90 inches). The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
What does WXD mean curtains?
Width of the pole between finials. Drop from the top of the pole to. your finished length. W. D.
When buying curtains do they come in pairs?
While it may seem logical that curtains should come in sets of two, curtains do not always come in pairs. They most often come in panels. Panels are a single piece of fabric or one curtain. If you want a typical curtain pair, you will need to buy two panels.
Do you measure each curtain?
Most ready-made curtains come in these widths: 117cm (46”), 168cm (66”) or 228cm (90”). To work out which one you need, measure the length of the rail or pole (between the finials), not the window. This measurement is the width of each curtain and means they’ll have a lovely, full gather even when closed.
What does 1 pair of curtains mean?
It means there’s only one side! Like you see in the picture it showed two curtains 1 panel means you only get one side. So if you’re looking to part them in the middle like in the picture you’ll need to buy more then one panel. Amazon Customer.
How wide should curtains be for 60 inch window?
For example, for a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.
How wide should curtains be for 100 inch window?
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
Should I use one or two curtain panels?
If you have larger windows, you may want to consider two curtain panels. They do fit better in the window, requiring a little less material than a single panel. It can sometimes be cheaper buying two smaller panels than one larger one. The double panels can also look better for larger windows.
How much fullness do you need for eyelet curtains?
– An eyelet curtain will usually have 2 x fullness = 100% of the track width. – A pinch pleat curtain requires more fabric to sew in the pleats as it gathers up tighter. As such you will require 2.5x the track width or 150% fullness.
How do you measure curtain width for eyelet curtains?
Simply measure between the finials (the decorative ends) to obtain the width. Drop: The inner edge of the eyelet is set down 3cm from the top of the curtain so you need to allow for this when measuring or your curtains will be 3 cm too short!.
How do you measure for eyelet curtains?
you will need to hold the tape measure at the top edge of the curtain pole. Then measure down to where you want the eyelet curtains to finish. That will be either to just at the window sill or a few inches past the window sill. Alternatively down to the floor my personal favourite.
When should curtains touch the floor?
In formal or dressy rooms, curtains should just touch the floor. A romantic room deserves elegant, extra-long curtains that pool or puddle on the floor. Curtains to the sill, or to the bottom of the window trim (called the apron), look great and are practical in a kitchen.
Should bedroom curtains touch the floor?
Like most other rooms, curtains should extend to the floor (give or take an inch). In the bedroom, curtains should only be short when something would interfere with their ability to reach the floor. For example, the headboard of a bed or a radiator placed under the window.
How far above floor should curtains hang?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.
