Table of Contents
To determine the optimal width of your curtain rod, you’ll need to measure the width of your window including the frame or trim. Take this measurement three times: once at the top, once at the center, and once near the bottom of your window. These measurements will most likely vary slightly.
How long should the curtain rod be?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
What size curtain rod diameter do I need?
Selecting the Right Size. Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.
Does curtain rod length include finials?
Measuring for drapery rods is simple. Measure the width of the window you are going to cover. Rod width does not include the width of the finials on each end. Finials add 2″ to 11″ in width on each end, depending on the finial style.
How much wider than window should curtain be?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
How do I measure curtains?
Measuring Curtains Measure the full width of the curtain pole or track not the window, excluding any fixtures or finials on the ends. If your curtains are pencil pleat, tab top or eyelet, double this width measurement to account for the way the curtains will be ‘gathered’ at the top.
How wide can a curtain rod be without support?
For 1 3/8 Inch Diameter Wood Poles: Two curtain rod brackets are sufficient up to a width of 60 inches (5 feet). Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How do you measure the diameter of a pole?
Step 1 – Measure the circumference of the post (distance around the post). Step 2 – Take that measurement and divide it by pi (3.14) to determine the post diameter.
What is the longest curtain rod size?
240 inch curtain rod Material: Metal. Rod Diameter: 0.63”.
How do I measure curtain width?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
How much wider is a curtain than a rod?
Standard Calculations. The standard recommendation for curtain width is to purchase or make curtains that are about 1 1/2 times larger than your curtain rod. Measure from one bracket of your curtain rod to the other to determine the right width.
How do you measure curtain width?
Measure the Width Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.
Do you double the width for curtains?
The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.
Are curtains measured per curtain?
All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.
How do you measure a corner curtain rod?
Measure from the outside edge of the outermost curtain bracket to the corner-side edge of the corner bracket on one window. Add 2 inches to this measurement and cut a curtain rod to this length. Measure the remaining window in the same way, and cut the rod for it.
How far should a curtain pole extend past window?
For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again.
How long can a curtain rod be without a middle support?
A center bracket is needed in almost any length greater than 5 to 6 feet, if you want to avoid any sagging. However there are “C” rings that will go over the bracket so that the drapes/curtains can be pulled to one side (either side, in fact).
How far should curtain rods stick out from wall?
General Installation Recommendations. When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
