Table of Contents
To measure your countertops, start by measuring the length of all counter tops, base cabinets, and island. Also include the inches of back splash. Now measure the width of the counter tops and multiply the total length of the counter tops by the width in inches.
How do you calculate square footage of a countertop?
To calculate the total square footage (after placing seams) you will need to follow this formula: “L” x “W” / 144 = s.f. (Length times width divided by 144 = square feet).
How do you measure for granite countertops?
How to Measure for Granite Countertops Measure the length and width of the entire surface you want to be covered with granite in inches using your measuring tape. Multiply the length by the width. Divide the total area in inches by 144 to get the area in square feet. Measure for the backsplash.
How do you read a countertop size?
To calculate the area of each countertop section, multiply the length times the width. (Length x Width = Area). Get the total square inches by adding together the areas of each section. You can calculate the square footage by dividing the total square inches by 144.
How do I estimate the cost of countertops?
Here is the average estimate cost per square foot for kitchen countertops based on the material.Kitchen Countertops Cost Per Square Foot. Material Cost Concrete $65 – $135 per square foot Granite $70 – $175 per square foot Engineered Quartz $80 – $140 per square foot Marble $110 – $250 per square foot.
What is the standard size for a kitchen countertop?
Countertop Width Standards Most homes are fitted with kitchen countertops that measure 25.5 inches in width (from the wall to the edge of the counter), with some measuring up to 28 inches. Standard measurements allow for a 1.5-inch overhang over 24-inch deep base cabinets.
What is the measurement of a slab of granite?
Usually, the minimum average size of a granite slab is 105″ x 54″. Thicknesses can also be 3/4″ or 1-1/4″. The granite slabs are packed in bundles of approximately 400 to 450 square feet.
How much should a countertop overhang?
How far should a countertop overhang on the side? Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
What is the measurement of granite?
Take measurements of the entire length of each countertop you want covered in granite. Step Two: Make sure you measure in inches, and multiply the length by 25.5 inches since typical cabinets are 24 inches and you’ll want a 1.5-inch granite overhang.
Are countertops measured in square feet?
= Total Square Feet: Measure each countertop section and record the length and depth dimensions of the sections (in inches, rounded to the nearest inch). Add all the sections (1-8) together to calculate the total square inches. Divide the total square inches by 144 to get the total square feet.
How do you figure linear feet for countertops?
Imagine the individual pieces lined up end-to-end and determine the length from one end to the other. In the countertop example, you need three pieces of two feet, three feet, and two feet. Thus, the total number of linear feet of countertop material that you need is 2+3+2=7 feet.
Is quartz cheaper than granite?
Quartz and granite countertops are priced similarly per square foot, with granite counters having the wider variation in price. Granite can be more expensive than quartz at times, based on the availability of a color and pattern. Sometimes quartz is more expensive due to the treatments it receives during manufacturing.
How much does it cost to put in new kitchen countertops?
Countertop installation costs $3,071 on average, with a typical range of $1,851 and $4,308. Homeowners usually pay $15 to $70 per square foot for the material and $10 to $30 per square foot for labor, for a total of $25 to $120 per square foot. These two expenses make up the largest portion of the total cost.
How much is Corian countertop?
Corian Countertop Costs Corian countertops cost between $45 and $65 per square foot. Labor costs for installing these counters average $75 per hour. The total cost of installing Corian counters in a home is about $3,500.
What is normal kitchen counter depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.
What are the kitchen layout?
There are five basic kitchen layouts: L-Shape, G-Shape, U-Shape, One-Wall and Galley. The size and shape of the room will typically determine your layout. Although variations and deviations do exist, most kitchen layouts are based on one of the following shapes.
How much space should be between kitchen island and counter?
Distance Between Island and Counter Recommended distance between kitchen work areas, which can include both perimeter countertops and kitchen islands: 42 inches minimum in a single-cook kitchen. 48 inches minimum in a kitchen where more than one cook may be working.
How many sq ft are in a slab of granite?
In terms of surface area, a typical slab of granite will be 45 square feet, although this is likely to end up being slightly less due to the re-shaping of the stone.
How much is a 6 ft slab of granite?
Basic granite slabs cost between $40 and $60 per square foot. The price jumps up to $75 to $100 per square foot for rare colors, stones, and patterns.
Whats the difference between granite and quartzite?
Granite is an igneous rock known for being very hard. Quartzite, on the other hand, is a metamorphic rock composed almost entirely of quartz, the hardest material on earth. Basically, quartzite comes about when quartz-rich sandstone is altered by the heat, pressure, and chemical activity of metamorphism.
