Table of Contents
The basic calculation for board feet is: Thickness x Width x Length / 12 = Board Feet. 2 x 4 x 10 / 12 = 6.667 Board Feet. A 2 x 10 -16′ has 26.67 board feet: 2 x 10 x 16 / 12 = 26.667 Board Feet. PCS x T x W x L / 12 = Board Feet. 84 x 2 x 8 x 12 / 12 = 1,344 Board Feet. 1.25 x 6 x 14 / 12 = 8.75 Board Foot.
How do you figure board feet in wood?
Board footage is calculated by multiplying the nominal thickness in inches (T) by the nominal width in inches (W) by the actual length in feet (L) and dividing by 12. The formula is: T x W x L = Board ft.
How do you calculate board feet for a project?
To determine board feet for your project, take the desired board’s thickness, width and length, and multiply them together. From there, you need to divide it by 144 to determine the number of board feet you need.
What is a board foot of lumber?
1. Hardwood lumber is typically sold by the board foot, a unit of volume equivalent to a board that is one inch thick, one foot wide and one foot long, or 144 cubic inches. These units refer to nominal or roughsawn dimensions, not surfaced dimensions.
How many board feet are in a 2x4x10?
A 2x4x10 board has 6.66667 total board feet in it: the board foot factor (BFF) of a 2×4 is 0.666667. Multiply 0.66667 by the length of 10 which gives total board feet of 6.66667.
How do I figure out how many board feet I need?
The basic calculation for board feet is: Thickness x Width x Length / 12 = Board Feet. 2 x 4 x 10 / 12 = 6.667 Board Feet. A 2 x 10 -16′ has 26.67 board feet: 2 x 10 x 16 / 12 = 26.667 Board Feet. PCS x T x W x L / 12 = Board Feet. 84 x 2 x 8 x 12 / 12 = 1,344 Board Feet. 1.25 x 6 x 14 / 12 = 8.75 Board Foot.
How do you calculate board feet in a calculator?
To estimate the board feet from a log, measure the average diameter of the smaller part of the log in inches. Then, measure the length of the log in feet. Move the scale’s marker over to where these two measurements meet. Where the two measurements intersect is the approximate board foot output.
How do you measure for wood?
Volume of Wood The cubic feet, or volume, of a cylindrical log is given by the volume of a cylinder V=πhr2. A log with radius of 2 feet and height of 10 feet would have a volume of about 125.66 cubic feet (or ft3).
How do you calculate wood for a project?
TIP: To calculate board feet: rough standard thickness X actual width X actual length divided by 144. Use the thickness of the material you intend to start with, not end with. For example, the 3/4″ top will start from 4/4 lumber. The legs will start from 6/4 lumber.
How do you calculate wood material?
A single board foot is one square foot of wood that is one inch thick. You can measure board feet by multiplying length x width x thickness in inches, and then dividing by 144. If ordering a large amount by board feet, just multiply the total board feet needed by the price per board foot for the total cost.
How do you calculate board feet in inches?
How do you measure a board foot? Take a rectangular piece of lumber. Measure the length of it in feet, rounding to the nearest decimal place. Measure the width in inches. Measure the thickness in inches. Multiply all three numbers together and divide by 12.
How do I calculate board feet in Excel?
Here is the relation: 1 board foot = 144 cubic inches = 1/12 cubic foot. Board foot formula = length * width * thickness. board foot = length(ft) * width(in) * thickness(in) / 144. board foot = length(ft) * width(ft) * thickness(in) / 12.
Is board feet a measure of volume?
The board foot is a unit of measurement for the volume of lumber often used by wholesalers and sawmills in the United States and Canada. It equals the volume of a one-foot length of a board, one foot wide and one inch thick. Board foot can be abbreviated as FBM (for “foot, board measure”), BDFT, or BF.
What is 200 board feet in square feet?
A 600 board foot kit will cover 600 square feet at 1 inch thickness or 300 square feet at 2 inches thick; a 200 board foot kit will cover 200 square feet at 1 inch thickness, and so on.
How many board feet are in a 1×4?
1” x 4” x 1′ = 0.33 bd. ft. 1” x 6” x 1′ = 0.50 bd. ft.
How do you calculate board feet in lumber in the Philippines?
The formula is (Width x length x thickness) / 144.
How many boards do I need?
To find the number of boards you need, divide the total deck square footage by the board square footage.
How do you calculate board feet in a slab?
Thus, the formula to calculate board footage is (thickness × width × length) ÷ 144. Make sure you keep all measurements in inches, then divide by 144.
How many board feet are in a 4×8 sheet of plywood?
Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2. For example, if the area to be covered in plywood is 800 ft2 then 25 sheets of plywood will be needed to cover it.
How do you figure board feet in standing timber?
The board-foot content of any board may be determined by multiplying the length by the width by the thickness, all expressed in inches, and dividing by 144 cubic inches. The board foot is also the most common volume measure for trees and logs to be used for lumber and veneer.
How many board feet do I need to build a house?
House Construction To keep it simple and stick to a good average, say that 6.3 board feet are required for every square foot of house. So, a 1,000 square foot home would need 6,300 board feet to complete, while 12,600 board feet would be necessary for a 2,000 square foot home.
How many boards are in a log?
How Much Lumber is in a Log? The board-foot contents of logs according to the International 1/4 Rule Diameter of log small end, inside bark Length of log (feet) 16 inches 85 110 17 inches 95 125 18 inches 110 140.
