Table of Contents
Fortunately, you can get measurements in three simple steps: Measure the inside of the window frame in three places for width: across the top, middle and bottom. Measure for height: at the left, middle and right side. Measure the depth of the window so you know how deep the blinds can be.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
What size blinds do I need for a standard window?
Standard window slat widths are ½ inch, 1 inch and 2 inches. Window treatments with wide slats are ideal for deep windows, while window treatments with narrow slats generally complement shallow windows. If you want to enhance the look and feel of a large window, choose custom window treatments with wider slats.
Do blinds have to fit exactly?
Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening. If the shades are installed outside of the window opening — called an outside mount — the shades typically are wider than the window by a few inches and can also be longer than the window.
How do you know what size blinds to get?
Measure exact width where the blind is to be placed. Add at least 3 inches for overlap (1-1/2″ per side) for optimum light control and privacy. Measure exact height from the top of the proposed headrail location to the base of the sill. If there is no sill, measure to where the blind is to reach.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
What length should blinds be cut?
Typically, a set of inside-mount blinds should measure about 1⁄2 inch (1.3 cm) less than the width of the window frame. Make sure you measure the inside of the frame, where the blinds actually fit, and not the entire window frame. Measure in at least three places — the top, bottom, and middle of the window.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
Are blinds supposed to cover trim?
While inside-mounted blinds provide good coverage, some gaps may remain on the side of the blinds as the blinds don’t cover the window trim. Outside-mounted blinds provide better coverage as they cover the entire window frame and thereby, the chances of any gaps existing on the sides become very low.
Should blinds touch window sill?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
Does Lowes cut blinds to fit?
Lowe’s can cut many blinds to custom-fit your windows at no additional cost. Bring in your measurements, and we’ll prepare your blinds while you shop. You can even Special Order just about anything you need for your installation.
How do you measure a double window for blinds?
For two (2) separate blinds in one window, take the smallest width and divide it by 2. (The factory will deduct 1/8″ – 1/4″ from each blind.) For three (3) blinds in one window, repeat the same steps. Then add 1/8” to the width of the left and right blind.
How are IKEA blinds measured?
Measure across the width of the roller blind, along the top edge. Draw a line with the marker at the point on the roller that’s equal to the width of your window. Also measure along the bottom edge of the blind and make a second mark at the point that equals the width of your window.
What’s the most common window size?
So, What Is The Most Common Window Size? The most common window size or average window size is 24×36. All common window sizes & dimensions for fixed, standard & double-hung windows can differ on manufacture.
How do you measure a window for a room?
1) A given room must have a window or glass door that is sized to equal at least ten percent of the floor area of the room. So, if a room is 10 feet wide x 12 feet long, then the room area would be 120 square feet and the minimum size of the window in that room would have to be12 square feet.
How wide should outside mount blinds be?
Outside Mount To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width.
How do you cut blinds to fit?
Cutting down the slats Align the slats so that they are even. Using a clamp or rubber bands, secure the slats together into position. Wrap the slats with masking tape to prevent chipping. Measure where you want to cut and mark a line with your pencil. Lay them on the saw and line up the blade where you need to cut.
Can you cut blinds with a miter saw?
Put your blinds in your chop saw (miter saw), make sure you get it lined up exactly where you want it. Remember, when you cut, the saw blade will take away a teeny bit extra, so make sure you’ve got the blade lined up on the outside of your line. Also, MAKE SURE all your blinds strings are away from the saw.
