Table of Contents
Measure width from side to side and length from front to back–where you measure will depend on the installation type. Be sure to refer to the specification sheet for exact dimensions. Height and depth are two separate measurements. Height is the full measure taken on the exterior from top to bottom.
How do you measure a bathroom sink for replacement?
Here’s how to measure for a basin Start with the width. Measure the distance from one side of the basin to the other. Next, measure the length. This is the distance from the rear of the basin to the front. Then, on the exterior of the basin, measure from the top to the bottom. Finally, measure the depth.
What are standard sizes for bathroom sinks?
Sink Size and Shape Most round bathroom sink bowls are 16 to 20 inches in diameter, while most rectangular sinks are 19 to 24 inches wide and 16 to 23 inches front to back. The typical basin depth is 5 to 8 inches.
How do I know what size bathroom sink I need?
Measure the length and width of the entire sink. Then measure the length, width and depth of the basin. Measure the height of the sink as well depending on the type of sink you have. You should also measure the space you have on your countertop to ensure that you can accommodate the sink of your choice.
How do you measure an undermount bathroom sink?
First, measure the depth of the bathroom sink to see how much space you need for the sink under the counter. You should also measure the full dimensions of the sink to know the exact size of the hole required for the countertop or vanity. You should leave at least 4” of counter space on each side of the sink.
How big is a small bathroom sink?
Small bathroom sinks or washbasins are any sinks measuring between 15 inches to 20 inches. But there are also petite sinks that are under 15 inches long.
What size sink do I need?
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
What is the standard size of a sink?
The most common sizes for a kitchen sink are 30″ or 33″, however a standard size could measure anywhere between 24″ and 36″ in length. The bulk of what you find while shopping will fall within this size range. Generally, sinks up to 30″ will contain one large single bowl.
What size sink goes in a 36 inch cabinet?
A typical 33-by-22-inch sink will fill a 36-inch base cabinet. If you’re replacing a sink, make sure it fits the existing cutout. If the cabinet allows, you may be able to install a larger sink by expanding the cutout.
Is a 25 inch sink big enough?
On average, customers who purchase single-bowl sinks prefer 30-inch-long dimensions at most. Experts recommend at least 22 to 27-inches in length, which also works for small kitchens. Double-bowl sinks require more room can reach up to 48 inches in length, while larger single-bowl sinks are typically 33 inches or less.
How do I measure for a replacement faucet?
Measure the distance between the handles. Hold the the tape measure above the faucet if it’s in the way. If the distance is six inches or more you need a “widespread” or “eight inch spread” faucet.
How far should a bathroom sink be from the front of the counter?
The NKBA suggests that the minimum space between the sinks’ centerlines within a vanity should be 36 inches. The depth requirements for double sinks are the same as those for single sinks. Two inches are always left between the front edge of the sink and the front edge of the countertop.
What is the smallest sink available?
At 18″ wide by 10″ deep, this tiny wall-mount is one of the smallest sinks out there. Duravit Vero Wall-Mounted Handrinse Basin, $360.75 from eFaucets. This sink has an attractive, modern look, and the attached towel bar is a nice touch.
Are oval sinks out of style?
While some people see oval sinks as classic, others see them as out-of-date. Since they aren’t geometric, they are not well-liked in modern design. With their smaller sizing, they are not ideal for large bathrooms.
What size sink fits in a 24 inch vanity?
If your vanity is 24-inches wide, look for a sink no more than 16-inches long to get at least four inches of counter space per side. The maximum sink length (or diameter) you can get is 22 inches, but this will leave no usable counter space.
Can you put a 30 inch sink in a 36 inch cabinet?
For example, a 36″ cabinet can accomodate a 30-32″ sink. Next, measure front to back to find cabinet depth (standard cabinets have a 24″ depth). If your countertop has a backsplash, subtract its thickness from this figure. In general, most cabinets can accommodate a sink that is 20 inches front to back.
Is a 10 inch sink too deep?
While 10 inches has its benefits, members with relatively shorter heights may experience discomfort. Beyond this, it will be too deep for sinks unless you do not experience back strains or the kitchen has a significantly low platform.
