Table of Contents
If you are measuring from a section of the wall that has trim on one end and a corner on the other, measure from the edge of the trim to the corner. Measure twice to make sure your measurements are accurate. You want to be precise to a 16th of an inch.
How do you measure linear feet for baseboards?
Divide the total number of inches by 12 to convert from inches to linear feet. For example, if your wall measured 40 inches in length, and you are installing molding on the top and bottom, 40 x 2 = 80 inches. Divide 80 by 12 to get 6.66 linear feet.
Should I nail or glue baseboards?
Installing baseboards with a combination of baseboard adhesive and finish nails creates a tight connection between the wood and the wall. The adhesive prevents the wood from bowing out between the wall studs, while the nails keep the boards locked into place while the glue sets.
What size nail should I use for baseboards?
As we discussed earlier with nail guns – the best baseboard nails are probably going to be 6d (2”) or 8d (2.5” for baseboard). These can easily accommodate 15 gauge or 16 gauge nails, giving you a long, durable nail for thick baseboards and studs.
How do you measure for trim?
Measure along the wall and floor junction from the first corner to the first cut point. Record this measurement with an additional note detailing if the left and right sides of the trim are inside or outside angles. Also, note the degree of the angles.
How do you price trim work?
The average total cost of trim installation projects ranges from $350 to $570 nationwide, and trim installation costs per linear foot can range from $4.50 to $6 for installation and painting of simple baseboards, chair rails and crown molding.
How much should baseboard installation cost?
Baseboard Installation Cost Per Linear Foot Expect to pay between $5.70 and $8.95 per linear foot for baseboard installation. Contractors usually price installation by the linear foot, and these costs include materials and labor. However, you’ll likely pay at least $15 more if you need debris removal.
How many linear feet are in a 12×12 room?
Multiply the length times the width of the room to get the room square footage. 12 ft x 12 in/ft (width of the room) = 144 in. So the total linear footage of the 1 x 12 boards is found by multiplying 5 (boards) by 6 (feet) which equals 30 linear feet.
How much is 32 linear feet?
2×4 boards: 8 feet times 4 boards = 32 linear feet.
How much do trim carpenters charge per linear foot?
Wood Trim Costs Item Unit Cost Line Cost Wood trim $4 per linear foot $2,000 Labor (carpenter) $70 per hour $1,680 Total Cost $7.36 per linear foot $3,680.
How do you measure baseboard trim angles?
Set the corner of the angle gauge into the inside corner or up against the outside corner of the surface you’re measuring. Open the gauge’s blades until they’re pressed firmly against the adjoining surfaces. Read the angle off the gauge. Lay a short piece of scrap baseboard on the floor, flat side down.
How do you measure corners for baseboards?
For inside corners, the long point of the miter is always at the back of the molding, against the wall, and against the miter saw fence. For inside corners, you measure to the long point of the miter and you cut to the long point of the miter.
What angle do you cut baseboard corners?
With inner mitered baseboard joints, each baseboard piece is cut at a 45-degree angle. When joined, the two pieces form a 90-degree angle that fits perfectly against the inside corner where two walls meet.
Should baseboards touch the floor?
Baseboards should only touch the floor if you have no plans to carpet your floors and if you’ve already finished installing your other flooring. If you have yet to install the rest of your floor, carpet or otherwise, you’ll need to take into account the height of the installed flooring.
Can you use brad nails for baseboards?
Yes, you can use an 18-gauge Brad Nailer for your baseboards. You are probably wondering if you need an 18 gauge or 16 gauge nailer for baseboard trims. The 18GA nails work well for trims up to 1/2 inch. For baseboards thicker than 1/2 inch I recommend you go for 16 gauge nail gun.
Do you nail baseboard to studs?
Base molding fits flush along the bottom of the wall and typically attaches to the wall studs and to the floor plate. The top nail should hit the stud and the bottom nail should either hit the stud or the floor plate, which is 1-1/2 inches higher than the subfloor.
What is better 16 gauge or 18 gauge nailer?
16-Gauge Finish Nailers The 16-gauge finish nail has a 0.0625-inch-thick shank and is typically supplied in 1 to 3½-inch lengths. Because it is thicker, it holds better than 18-gauge brads. Also, it can be used to fasten thicker, denser pieces of wood.5 days ago.
Which is better 15 or 16 gauge finish nailer?
The 15g finish nailer is ideal for heavier jobs. If you’re working with thinner, more delicate pieces of trim, the 16g nailer is the better option. This finish nailer will give you excellent holding power without leaving behind a big entrance hole and splitting the wood.
How do you calculate interior trim?
Multiply the length times 2 and the width times 2, then add the values together, eg. (length × 2) + (width × 2) = perimeter. Subtract the length of any doors or windows that break up the room. For example, if you have a 36″ entry door to the room, subtract 3′ from the perimeter measurement.
How much should I charge to trim a house?
Average Trim Costs The national average cost of installing trim in a house is $1,279, with a typical range between $604 and $1,994. The cost at the low end is $200, and the high-end cost is $5,200. Trim and molding are woodwork elements that embellish a home’s floors, walls and ceilings.
How do I bid for trim installation?
It doesn’t matter how you bid it, as long as you add labor + materials + overhead + profit. If you don’t have data for 100’s of windows that you have trimmed, then you can’t “bid it by the window”, because you have no friggin’ idea how long it takes you to trim a window.
How much does it cost to have a 12×12 room painted?
Painters charge $300 to $1,000 per room on average, depending on the size. The average cost to paint a 12×12 room is $400 to $950.Average Labor Cost To Paint A Room. Charge Average Cost Per Square Foot $1 – $3 Per Room $180 to $650 Per Hour $20 – $50.
Are baseboards worth replacing?
Designed to hide the seam where wall meets floor, baseboards give any room a finished look. If your trim is showing wear and tear, painting is always an option, but the prep work is important and can be time-intensive. Replacement is your best option if they’re water-damaged, stained or warped.
Can I install baseboards myself?
Baseboard moulding is a simple way to add instant character to a room. While the installation of the baseboard trim itself isn’t hard, the cutting and measuring of the angles can be a bit tricky. A homeowner can easily learn how to install baseboards with this easy-to-follow project guide.
