Table of Contents
Ask a partner to hold the measuring tape flat against the wall above the baseboard while you stretch the tape out to the end of the baseboard. Take the measurement to the closest 1/16th of an inch. Write the measurement down on a piece of paper, matching the measurement with the appropriate wall in the rough outline.
What is the standard size of baseboards?
Most baseboards are 1/2 to 1 inch thick and 3 to 8 inches tall. Gauge baseboard size by its relationship to crown and casing. Baseboard is typically taller than casing is wide, and about as tall as the crown. The taller the crown, the taller the baseboard should be to maintain visual balance.
How do you measure for trim?
Measure along the wall and floor junction from the first corner to the first cut point. Record this measurement with an additional note detailing if the left and right sides of the trim are inside or outside angles. Also, note the degree of the angles.
How do you measure baseboard height?
A general rule of thumb for your baseboards is the 7 percent rule — they should equal 7 percent of the overall height of your room. So, if you have 8-foot ceilings, your baseboards will look best at around 7 inches high.
What is the most popular size of baseboard trim?
Common Heights Sold by Retailers: Retailers sell all sorts of shapes and sizes, but the most common include 3 ¼ inches and 5 ¼ inches. Typically, they are 5/8 inches thick and come in 16-foot strips.
What length is baseboard sold in?
Flat Baseboard Moulding Flat baseboard comes in different heights, usually ranging from 3 1/2 inches to 4 1/2 inches. The back of the trim is grooved to permit bending and makes it easier to install. Flat baseboard is versatile — it can be used in nearly any style of home.
How do you measure baseboard trim angles?
Set the corner of the angle gauge into the inside corner or up against the outside corner of the surface you’re measuring. Open the gauge’s blades until they’re pressed firmly against the adjoining surfaces. Read the angle off the gauge. Lay a short piece of scrap baseboard on the floor, flat side down.
How many linear feet are in a 12×12 room?
Multiply the length times the width of the room to get the room square footage. 12 ft x 12 in/ft (width of the room) = 144 in. So the total linear footage of the 1 x 12 boards is found by multiplying 5 (boards) by 6 (feet) which equals 30 linear feet.
How do you measure corners for baseboards?
For inside corners, the long point of the miter is always at the back of the molding, against the wall, and against the miter saw fence. For inside corners, you measure to the long point of the miter and you cut to the long point of the miter.
How do you measure trim in a house?
Use a measuring tape to calculate the square footage of each room that will need base trim. Choose a starting place in the room — such as a corner or next to the door frame — and measure the length of the wall in inches. Write down each measurement and continue around the room until all walls are measured.
What angle do you cut baseboard corners?
With inner mitered baseboard joints, each baseboard piece is cut at a 45-degree angle. When joined, the two pieces form a 90-degree angle that fits perfectly against the inside corner where two walls meet.
How tall should baseboards be with 9ft ceilings?
A baseboard height that’s approximately 7% of the wall height provides for a solid and definable base without being too big. The overall proportion of baseboard to wall height will be comfortable and pleasing. So in a room with a 9 foot high ceiling, a baseboard that’s about 8 inches tall works.
How tall should baseboards be with 10ft ceilings?
Here is a great rule of thumb: A standard 8-foot wall typically has a baseboard 3 to 5 inches tall, while a 10-foot ceiling calls for 5 to 7 inches.
Can baseboards be too tall?
If the baseboard is too tall for the room, it will not provide the balance needed to make the room visually appealing. Instead, it will appear to close the walls of the room up, as the distance from the baseboard to the ceiling is too minimal.
What is trending in baseboards?
Solid wood finger jointed wood, and MDF (medium-density fiberboard) baseboards are among the most popular material choices. Choosing the material often comes down to budget or color preference, so it’s easier to determine which material is right for your house.
Do baseboards need Quarter round?
quarter round. If you’ve been looking at baseboard finishing trim, you’ve probably discovered quarter-round, too. While quarter-round can be installed along the bottom of baseboard, trim carpenters and homeowners tend to prefer the sleeker look of shoe molding, which is taller and narrower than its curved counterpart.
Can I use 1×6 for baseboard?
Classic farmhouse/cottage trim work no mitering, using 1×6’s for baseboard, 1×4’s for sides of door with a 1×2 topped with a 1×6 for the tops of the doors white beadboard with a 1×4 to trim it on top.
Is installing baseboards easy?
Baseboard moulding is a simple way to add instant character to a room. While the installation of the baseboard trim itself isn’t hard, the cutting and measuring of the angles can be a bit tricky. The process is similar to installing crown moulding.
What is the difference between baseboard and trim?
Baseboard is the wood (or other material) board that runs between the floor and the wall. Trim is a broad term that encompasses baseboard and other trim throughout the home.
Should baseboards match door trim?
Your baseboards do not have to match your door trim. Though it provides a consistent and more traditional aesthetic, it is a rule that you should feel free to break. Baseboards and door trim are great places to add a unique flair to any room. Traditionally, baseboards and door trim have been ignored in interior design.
How do I find old trim?
Trim Repair: How to Fix and Revive Trim Step 1: Start with a thorough cleaning. Photo 1: Remove old paint spots. Step 2: Scrape and sand badly damaged areas. Photo 2: Scrape eroded areas. Step 3: Roughen the finish and fill small holes. Step 4: Apply stain to hide dings and scratches. Step 5: Apply the fresh finish.
What is colonial baseboard?
Colonial-style baseboard is similarly sized but has some type profiled top edge, the most common being the Roman ogee shape.
