Table of Contents
1) Measure the width inside the window opening at the top, and round down to the nearest 1/8″ measurement. 2) Measure the height inside the window opening from the top of the window opening to the window sill. If your window does not have a sill, measure to the point you would like the blind to reach.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
What size blinds do I need for a standard window?
Standard window slat widths are ½ inch, 1 inch and 2 inches. Window treatments with wide slats are ideal for deep windows, while window treatments with narrow slats generally complement shallow windows. If you want to enhance the look and feel of a large window, choose custom window treatments with wider slats.
How much should I subtract for window blinds?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame.
How much shorter should blinds be than the window?
Lastly, to make sure of the light control as well as privacy, the blinds should be at least three inches broader than the window casing, so that it overlaps the window by 1 and a half inches on each side.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
What are the standard window sizes?
Widths can be 2 feet, 3 feet, 4 feet, 5 feet, 6 feet, and 8 feet. Standard heights can range from 2 feet tall to 8 feet tall, with additional heights of 18, 52, 54, and 62 inches. Rough openings are in whole numbers, while 1/2 inch is taken from each rough opening size to get the actual window size.
Should blinds touch window sill?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
Does Lowes cut blinds to fit?
Lowe’s can cut many blinds to custom-fit your windows at no additional cost. Bring in your measurements, and we’ll prepare your blinds while you shop. You can even Special Order just about anything you need for your installation.
How much space do you need for mount blinds?
3⁄4″ is the minimum depth required for inside mount blinds.
What are standard blind sizes?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches. However, window sizes and shapes can vary greatly, especially in older homes or homes with custom windows.
How do you measure a double window for blinds?
For two (2) separate blinds in one window, take the smallest width and divide it by 2. (The factory will deduct 1/8″ – 1/4″ from each blind.) For three (3) blinds in one window, repeat the same steps. Then add 1/8” to the width of the left and right blind.
Do you measure replacement windows from the inside or outside?
Measure from the high point of the sill of your window (the surface closest to the inside of the window) to the top of the window opening. Make three measurements: one at the left side, one at the center and one at the right side of the window. Use the smallest of these three height measurements to order the window.
How do you measure a window for a room?
1) A given room must have a window or glass door that is sized to equal at least ten percent of the floor area of the room. So, if a room is 10 feet wide x 12 feet long, then the room area would be 120 square feet and the minimum size of the window in that room would have to be12 square feet.
How wide should outside mount blinds be?
Outside Mount To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
How much clearance do you need for interior mount blinds?
As a general rule: 2″ horizontal blinds such as faux wood blinds and wood blinds need at least 1.5″ inches and 3″ for a flush mount. Honeycomb Shades for instance require less space needing just under 1″ depth and 2″ for a flush mount blind.
What’s the most common window size?
So, What Is The Most Common Window Size? The most common window size or average window size is 24×36. All common window sizes & dimensions for fixed, standard & double-hung windows can differ on manufacture.
Is it OK if blinds are too long?
It’s simpler than it looks to shorten blinds. Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.
