Table of Contents
The throat depth is how deep the jaws of a vice are and is measured by the vertical distance from the top edge of the jaws down to the top of the screw/slide. This indicates the maximum height of a workpiece that is capable of fitting into the throat of a vice.
How the size of vice is stated?
Explanation: The size of the engineer’s vice is stated by the width of the jaws.eg. 150mm parallel jaw bench vice.
How big is a 4 inch vise?
4 in. Jaw Width (in.) 4 in. 5-1/2 in.
How big is a 6 inch vise?
Wilton 63302 6-Inch Shop Vise Material Cast Iron Item Dimensions LxWxH 18 x 8.7 x 9.7 inches Color Black Style 6-Inch Shop Vise Item Weight 42 Pounds.
What is throat depth on a vice?
Throat depth is the vertical distance from the top edge of the jaw (flush with the bench top) down to the top of the main screw and guide rods. For these vises, 3 to 4 inches is the optimal throat depth range.
What are the types of vice?
The following are the types of vice: Bench Vice. Simple Bench Vice. Swivel Base Bench Vice. Quick Release Vice. Combination Vice. Machine Vice. Plain Machine Vice. Flange Machine Vice. Swivel Machine Vice. Universal Machine Vice. Vertical Machine Vice. Pipe Vice. Leg Vice.
Which metal is used to make vice clamps?
It is used to hold metal when filing or cutting. It is sometimes made of cast steel or malleable cast iron, but most are made of cast iron.
How much is a 4 inch vise?
Compare Similar Vises current product Top Rated Top Rated OLYMPIA BESSEY BESSEY 4 in. Bench Vise Non-Marring Vise Jaw Accessory for Use on Vises with Jaws from 3 in. to 6 in. Wide 4 in. Drill Press Vise $2462 $1402 $2727 (84) (337) (219).
Where are Tekton vises made?
Taiwan A. Length 21.5 in. C. Height 9.8 in. Footprint 8 x 10 in. Weight 42.95 lb. Country of Origin Taiwan.
What are Wilton vises made of?
This vise has a 360 degree swivel base with double lockdowns, a precision turned sidebar, and is made from 60,000 PSI tensile ductile iron.
How do you identify Wilton vise?
The identifying company and model information can be found on the sides of the back jaw. You can tell the age of the vise by looking at the bottom of the guide rail (with the vise opened wide). As can be seen, it is stamped with 4-53.
Are Wilton vises worth it?
Definitely. But definitely worth it, if you need a vise that big. But considering how much stronger it is, and how wide it opens, you can probably get away with the F50 or F45.
Where are Bessey vises manufactured?
I have many German made Bessey clamps and was expecting the quality of this vise to be on par with them, which it is. I was very discouraged to find out (upon the arrival of the vise) that it is manufactured in Turkey, NOT Germany.
What size is a record no3 vice?
Irwin Record No. 3 Mechanics Vice 4in Material Cast Iron, Iron Brand Irwin Record Item dimensions L x W x H 36.8 x 19.2 x 18.8 centimetres Weight 500 Grams.
What should be avoided when mounting work in a vise?
What should I not do? Do not weld the base of the vise to any metal. Do not repair a vise by welding or brazing. Do not try to bend a heavy rod in a light vise. Do not cut into the jaws. Do not apply heavy pressure at the corner of the vise jaws. Do not use a handle extension (e.g., a pipe) for extra clamping pressure.
What do you look for in a vice?
Jaw Opening/Jaw Width Most common DIY projects and household tasks don’t need a vise with a jaw width wider than four or five inches. But if you will be doing specialized work with larger materials, be sure to select a vise with a jaw opening wide enough to accommodate your projects.
What is the jaw of a vice used for?
vise, also spelled Vice, device consisting of two parallel jaws for holding a workpiece; one of the jaws is fixed and the other movable by a screw, a lever, or a cam. When used for holding a workpiece during hand operations, such as filing, hammering, or sawing, the vise may be permanently bolted to a bench.
Is fitting vice a holding vice?
Bench Vice This is a job holding devices that is often used to hold the tasks while performing operations such as sawing, filing, chipping, tapping, external threading, etc. It is fitted above the bench. It is also called machine vice when it is fitted with a machine.
How do I choose the right vise?
While selecting a bench vise, you have to check its throat depth – this is the distance from the top side of the jaw to the top of the slide below the jaw. Larger throat depths mean you can hold larger workpieces. Bench vises have varying jaw widths. For larger objects, you need bench vises that have bigger jaw widths.
How do you measure a bench vice?
Vises are typically available in 4, 5, 6 & 8″ sizes. These sizes refer to the width of the jaws. The larger and heavier the object to be held the larger the vise required. As a general rule of thumb, the maximum throat depth is typically proportionate to the jaw width.
Why the jaws of fitters vice are serrated?
The Jaws Faces of the vice are made from hardened steel. There are also serrated which is a criss-cross pattern which provides a firmer grip on the workpiece. The Jaws Faces are screwed to the Sliding Jaw and the Fixed Jaw so that if they are damaged they can be replaced.
Why is cast iron used for vices?
Iron. The main body and slide of a heavy-duty bench vice, such as an engineer’s vice, is usually cast from either grey or ductile iron, as the vice is expected to withstand heavy work applications and frequent use. The type of iron used depends on each model and manufacturer. Both types of iron have their advantages.
Are Tekton vise any good?
5.0 out of 5 stars3 years daily use and this thing still clamping with the best. Ok so I bought this vise in 2017. I use it everyday basically out of my fab shop. It gets wrenched on, beaten.
Where are Wilton tools made?
Wilton tools are proudly made in the USA. Wilton manufactures, markets and distributes a complete line of innovative, high-quality machines designed to meet the broad needs of today’s Metalworking Market.
