Table of Contents
How do you measure for a replacement toilet seat?
Using a tape measure, determine the distance between the center of the mounting holes in the back of the toilet. The standard measurement for this distance is 5 ½”, with a midpoint of approximately 2 ¾”. Place the hook of your tape measure at the midpoint and measure to the outside edge of the toilet bowl rim in front.
How do I know what size my toilet is?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
Are all toilet seats a standard size?
No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. There are key measurements that you will need, even though most seats are adjustable to fit the most common toilet bowl shapes. The measurements are: The distance between the fixing holes – where the screws are.
Are UK toilet seats a standard size?
There is no universal standard for toilet or toilet seat sizes in the UK. However, certain patterns have developed. The following combinations of toilet seat lengths and widths are relatively popular: width 35 cm, length 40-41 cm.
How do you measure a B&Q toilet seat?
Measure from your toilet seat fixing point to the lip and then the width to find the dimensions needed for your new toilet seat.
Can you replace a 12-inch rough in toilet with a 10 inch?
A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
Are all toilet bases the same size?
Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
How are seats measured?
Seat height measures the seat to floor (or footplate) length. It’s measured from behind the patient’s knee to the sole of their foot while seated. It’s important to measure this correctly as up to 19% of someone’s weight is distributed through their feet while sitting.
How do I know if my toilet seat is round or elongated?
Toilet seats are sold by shape (not by length). If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat. Notice also that the elongated bowl is shaped more like an oval (egg-shaped).
Will a round toilet seat fit on an elongated toilet?
While you can install a round toilet seat on an elongated toilet, it isn’t recommended. A round toilet seat will not fully cover the toilet bowl rim of an elongated toilet leaving the rim exposed.
How do I choose a toilet seat UK?
To get the perfect fit we recommend you take the following measurements: – Fixing centre distance – the point between the two fixing holes of your toilet. – Width at widest point – the width of your toilet pan at it’s widest point. – Total depth – The distance your toilet pan sticks out from the wall or cistern.
Are all toilet seat hinges the same?
There are two main types of hinge fixings, top fixing and bottom fitting, and it is worth noting that not all hinges are suitable for all toilets. Bottom fixing toilet seat hinges feature a traditional style fixing which includes fitting two bolts down into your pan and then tightening them from underneath.
Is there a tool for tightening toilet seats?
From under the bowl, turn the toilet seat nuts clockwise until they are tight. A ratchet wrench with a deep socket is usually the easiest way to tighten these bolts, but an adjustable wrench can also be used.
Are toilet seat attachments universal?
Do all toilet seats fit the same? The simple answer is no, there are a range of different toilet seat fittings. Some are bottom fixing (fitted from beneath the fixing holes) and some are top fixing (usually required when there isn’t access to the bottom of the pan, e.g. with a fully shrouded toilet).
How do I stop my toilet seat from sliding sideways?
Related Articles Lower the seat and locate the two screw covers at the back of the seat. Put the flat-head screwdriver in the screw slot and hold it steady while you unscrew the nut from underneath the bowl. Remove the nut and bolt and take the seat off the bowl. Insert the screw back in the holes.
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
Can you replace a 14 inch rough-in toilet with a 12-inch rough-in toilet?
You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.
How do you measure a toilet rough-in?
Measuring is done with the old toilet still in place. Start by measuring from the wall behind the toilet to the center of the bolts at the base of the toilet. If your existing toilet has four bolts, measure to the center of the back bolts. This measurement is known as the rough-in measurement.
