Table of Contents
To determine the optimal width of your curtain rod, you’ll need to measure the width of your window including the frame or trim. Take this measurement three times: once at the top, once at the center, and once near the bottom of your window. These measurements will most likely vary slightly.
How long should my curtain rod be?
A good rule of thumb is to have the curtain rod extend three to four inches from each side of the window frame. Using a pencil, make a small mark at the appropriate width on the wall. You may want to use a level to make sure the marks are straight.
What are the sizes of curtain rods?
Curtain rods are available in a variety of lengths. The most standard sizes you’ll find in stores are 28-48 inches, 48-84 inches, 66-120 inches or 120-170 inches. These ready-made options cater to most common window sizes, but it’s best to purchase adjustable rods that can accommodate a broader range of window sizes.
Does curtain rod length include finials?
Measuring for drapery rods is simple. Measure the width of the window you are going to cover. Rod width does not include the width of the finials on each end. Finials add 2″ to 11″ in width on each end, depending on the finial style.
How many inches should curtain rod be outside window?
The standard distance from the window casing to the end of the curtain rod (excluding finials) on each side of the window should be four to 10 inches. As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame.
How do I measure curtains?
Measuring Curtains Measure the full width of the curtain pole or track not the window, excluding any fixtures or finials on the ends. If your curtains are pencil pleat, tab top or eyelet, double this width measurement to account for the way the curtains will be ‘gathered’ at the top.
Do all curtain rods need to match?
Curtain rods should “match” the fabric. Heavier drapes such as velvets work well on large and somewhat decorative rods while light silks and sheers can sit on light-weight, thinner bars. That said, hardware should also compliment the rest of the room, and it’s helpful to repeat a material or tie in a theme.
How do you measure the diameter of a pole?
Step 1 – Measure the circumference of the post (distance around the post). Step 2 – Take that measurement and divide it by pi (3.14) to determine the post diameter.
How far from the wall should a curtain rod be?
General Installation Recommendations. When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How do you read curtain measurements?
Curtain measurements are always written with the width first and then the length. For example, a panel that is 46″ x 54″ is 46 inches wide and 54 inches long.
Do you double the width for curtains?
The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.
Are curtains measured per curtain?
All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.
How do you measure a corner curtain rod?
Measure from the outside edge of the outermost curtain bracket to the corner-side edge of the corner bracket on one window. Add 2 inches to this measurement and cut a curtain rod to this length. Measure the remaining window in the same way, and cut the rod for it.
How do you determine the diameter of a curtain rod?
Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.
How do I choose a curtain rod?
Use the largest of the three as your window’s width. If you don’t have much space to either side of your window, look for a curtain rod that is the same width as your window. However, if space permits, we recommend that your curtain rod extend five inches past your window on either side.
Which curtain rod is best?
Best curtain rod overall: Decopolitan End Cap Single Curtain Rod Set. Best curtain rod for renters: RoomDividersNow Tension Rod. Best curtain rod for traverse draw heavy drapes: Rod Desyne Heavy Duty Adjustable Traverse Rod. Best curtain rod for blackout curtains: Umbra Twilight Room Darkening Curtain Rod.
