Table of Contents
To measure for blind length, take the same approach using the metal tape measure from the top of the recess to the windowsill at 3 points and note the narrowest point. For vertical blinds, we recommend you reduce the length by 1cm to prevent the fabric from catching on the sill.
How do I know what size blinds I need?
Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
What size blinds do I need for a standard window?
Standard window slat widths are ½ inch, 1 inch and 2 inches. Window treatments with wide slats are ideal for deep windows, while window treatments with narrow slats generally complement shallow windows. If you want to enhance the look and feel of a large window, choose custom window treatments with wider slats.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
What is a standard size blind?
Standard sized blinds are anywhere from 24 x 72 – 72 x 72 off the shelf at your local hardware stores.
What is the standard window size?
The most common window size or average window size is 24×36. All common window sizes & dimensions for fixed, standard & double-hung windows can differ on manufacture.
Do you measure replacement windows from the inside or outside?
Measure from the high point of the sill of your window (the surface closest to the inside of the window) to the top of the window opening. Make three measurements: one at the left side, one at the center and one at the right side of the window. Use the smallest of these three height measurements to order the window.
How do you measure a double window for blinds?
For two (2) separate blinds in one window, take the smallest width and divide it by 2. (The factory will deduct 1/8″ – 1/4″ from each blind.) For three (3) blinds in one window, repeat the same steps. Then add 1/8” to the width of the left and right blind.
Does Lowes cut blinds to fit?
Lowe’s can cut many blinds to custom-fit your windows at no additional cost. Bring in your measurements, and we’ll prepare your blinds while you shop. You can even Special Order just about anything you need for your installation.
Should blinds touch window sill?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
How deep should inside mount blinds be?
3⁄4″ is the minimum depth required for inside mount blinds.
Does Home Depot cut blinds length?
Once you have properly measured, bring your measurements in to the store. Our associates can cut your in-store bought blinds to the exact size needed, for free.
Should blinds be longer than window?
Measuring for outside mount blinds is a different process. Because you’re mounting the blinds outside the window on the wall above, they need to be slightly wider and taller than the opening. We recommend going at least 2″ wider than the opening on either side, so 4″ total.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
What is the difference between inside mount and flush mount?
Minimum inside mount depth is the amount of depth required to securely mount the shade/blind inside the window frame. The minimum flush mount depth is the required mount depth needed for the shade/blind to fit fully inside of the window frame, without protruding outward at all.
How do you measure and hang mini blinds?
How to Measure for Inside Mount Mini Blinds Measure the depth of your window frame, from the front of the opening to the glass. Measure the width of each window opening. Measure the height of your window opening in three places: left, center, and right. Order at the exact opening size with no deductions.
Is there an app to measure windows?
Windowmaker Measure 2.0 – Smartphone/Tablet App for Window & Door Measurements. Windowmaker Measure allows a salesperson or surveyor to capture photos and add text or voice annotations for each ‘hole in the wall’. It provides automatic and precise measurements of window & door openings with various approaches.
