Table of Contents
What kind of wood should you use for exterior shutters?
Cedar is the most common material for construction of exterior shutters because of its resistance to both insects and decay. It is a straight wood that finishes very well and can withstand harsh outdoor conditions well.
How do you make exterior window shutters?
How thick should wood shutters be?
Thickness, Width, Height Our default standard thickness is 1 5/16″, but that can be varied from 7/8″ to 2 1/4″ to match existing exterior shutters. The length and height can be specified to the nearest 1/16″ inch.
Can you use untreated wood for shutters?
There are definitely more than one way to construct and hang shutters – I am simply sharing how we did it! Supplies needed to build shutters: Untreated Pine (we used 1.5 inch thick pine wood for the backboards and 3/4 inch thick pine for the cross board)Sep 21, 2016.
What kind of wood do you use for board and batten shutters?
Western Red Cedar is the most common material for building exterior board and batten shutters in the industry. Cedar has many of the same qualities as Redwood, yet is less dense, making it easier to sand and finish.
Should shutters be the same size as the window?
For the most authentic look, we recommend measuring only the window opening not including any frame or trim around it. Typically, the width of your shutters should be half of your total window width. Keep in mind that the shutters should look like if they could close to cover the window.
How long does it take to make custom plantation shutters?
For the vast majority of jobs, the entire process of getting plantation shutters, from the initial consultation to installation, takes about 4-6 weeks and depends on multiple factors.
How do you make slat shutters?
Then build these slatted shutters.Seal the slats to highlight the beauty of the natural wood. Prep the Wood. Seal the slats with a clear spar varnish to bring out the natural wood’s beauty. Assemble the Slats. Begin assembly with another jig. Prep the Trim Boards. Secure Trim to Slats. Cover the Ends. Add Touch-Up Paint.
Is MDF good for shutters?
MDF is a much cheaper material than “real” wood, and therefore MDF shutters cost much less than wooden shutters. The robustness of MDF window shutters also make them particularly suitable for playroom or children rooms. MDF shutters are less prone to dent and scratches.
How long do exterior wood shutters last?
These shutters can last up to 20 to 30 years (or another 30 years if stripped and recoated!), for an affordable price, with little maintenance.
What is polymer shutters?
Housing an aluminium core that provides increased strength and durability, these blades won’t crack, split, chip or warp. Allure Polymer Shutters have the aesthetic appearance of real wood, they’re fire retardant and are made from a solid, non-toxic, recyclable material.
How wide should board and batten be?
The battens should butt tightly against the top trim board and be flush at the bottom with the wider vertical boards. While the width of the battens is your choice, they should be wide enough to overlap the edges of the larger boards by at least ½ inch on both sides.
Are board and batten shutters popular?
Existing on historical cottages, European homes, and early American colonials for centuries, these classic shutters continue to be a popular choice, especially when the homeowner wants to create a rustic or modern farmhouse feel.
How far should shutters be from window?
In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim. If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract.
Do you put shutters on double windows?
Contrary to popular belief, not every window needs shutters. Proper shutters should at least appear large enough to cover the entirety of the window when shut (as that’s, you know, the whole point of shutters). Shutters should be avoided on double-mulled windows, picture windows, bay windows, and most dormer windows.
How do you measure shutter width?
To determine the width of your shutter, divide the width of the window opening in half. For short windows where the height is smaller than the width, divide the width of the window by 4. The height of the shutter is usually the height of the opening, not counting the window sill.
What is board batten siding?
So, what is “board and batten?” It’s a type of siding where thin strips of wood molding—or “battens”—are placed over the seams of panel boards. The result is an aesthetic that is both rustic and chic, with the strong vertical lines providing shadows and textures to the home exterior.
How long do Polywood shutters last?
Polywood shutters are crafted from a solid-engineered wood substitute that won’t chip. They last far longer than traditional wood shutters. They can last for more than 50 years with appropriate maintenance.
How long install California shutters?
How Long Will It Take? Of course, before you start the installation process one of the first things you may want to know is “how long will this take?!” If everything goes well, you can expect to spend about half a day working on this project – so set aside at least 4-6 hours.
How do you hang wood shutters on brick?
Adding shutters to a wooden exterior is easier, but attaching them to brick isn’t much more difficult with the right tools. You’ll need to use a hammer drill and a masonry drill bit to make the holes in the wall, and either masonry wall anchors or shutter fasteners to hang the shutters.
Which material is best for shutters?
Basswood. Basswood has taken over the world as the best material for plantation shutters. Also, Basswood offers inimitable flexibility when it comes to designing and styling. Basswood shutters can be sanded, painted and stained to any color of choice.
What material are shutters made of?
The three materials most often used for shutters are wood, vinyl, and composite.
Do wooden shutters warp?
Do wood shutters really warp? Wood is a natural material that is subject to humidity so it’s true that some woods are prone to warping. Some shutter companies have been known to produce louvers that warp over time, but there are certain precautions that a reputable shutter company will take to avoid this.
