Table of Contents
What do you need to make wire jewelry?
Wire Jewelry Tools Ruler. Wire Cutters. Permanent Marker. Jewelry Making Pliers: Round, bent nose and chain (use these to tuck in wire ends and shape your wire) Gauge (measures the inside of holes for beads and the width of the wire for gauging) Needle Nose Flat File (for filing the wire ends).
What materials do you need for wire wrapped rings?
Supplies you’ll need: Soft or half hard round wire (use 0.8mm or 1mm to start out – you’ll find this easier to work with as the strength increases in your hands) Side cutter or flush cutter. Round nose pliers. Ring mandrel.
Can you harden artistic wire?
All you need to do is place your piece onto the steel block and use a hammer to gently tap the piece until it hardens. You can also use the rounded end of a chasing hammer to create a gorgeous hammered textured effect, which will also harden it in the process.
What is craft wire made of?
Ideal for making jewelry, sculpting wirework, and even home fixes, craft wire is a versatile material for creative tasks that call for custom supports. Made of metal—typically aluminum or copper—it has some level of flexibility to allow artists to create angular bends, curves, spirals, and more.
How do you keep wire jewelry from bending?
Use a pair of flat-nosed pliers on each end of the wire and twist in opposite directions while keeping the wire straight and taut. This works best for shorter lengths of wire. You can also insert one end of the wire into a pin vise and create a loop at the other end to grip with a pair of pliers.
What kind of wire is used for wire wrapping jewelry?
24 gauge jewelry wire is a good all-purpose wire diameter. 24-gauge wire is fine enough to fit through most gemstone beads, and is durable enough to make good wire-wrapped loops. 22 gauge jewelry wire is a good general-purpose wire gauge.
What pliers do you need for wire wrapping?
Chain nose pliers: with rounded outsides and flat facing jaws, tapering to a small point making them ideal for wrapping wire and closing jump rings.
How do you make wire wrap necklaces?
Instructions Cut the Wire. Cut two pieces of 24-gauge wire each at least 5 inches long. Twist the Wires Together for 1 Side. Align the Wire on the Stone. Twist the Wire to Form the Basket Base. Finish the Wire Twists for the Other Side. Secure the Stone. Twist the Wires Together. Secure the Wires.
Is aluminum wire good for jewelry making?
Aluminum wire, anodized and colored, is extremely lightweight and can be used in jewelry, hobby, crafting and garden-set applications, too! Unlike color-enameled copper wire, which will work-harden as it’s manipulated, aluminum stays soft.
How do you harden copper wire jewelry?
Place your copper wire onto your fireproof ceramic soldering surface. Heat up your soldering torch to a medium flame and apply it to the wire for a few moments to anneal the metal. This will make the copper easier to bend, but will also increase its hardening capacity.
Does wire wrapped jewelry tarnish?
Non-Tarnish Jewelry Wire is the perfect gold alternative. ParaWire takes 99% pure copper wire and coats it with an exclusive non tarnish coating and a lovely finish. This wire is great for jewelry making and other craft projects!.
What are wire earrings made of?
An earwire is a bow of wire, looped to fasten an earring to a pierced ear. It is generally made of precious metal or hypoallergenic surgical steel. Earwires are available commercially, as jewelry findings, but some jewelers make their own.
What can I make with jewelry wire?
These easy wire jewelry tutorials are bound to inspire you to create some gorgeous, original pieces of your own. Wire Wrap Geode Necklace. Wire Wrapped Beaded Necklace. Galactic Circle DIY Earrings. Wire-Wrapped Crystal Bracelet. DIY Bird’s Nest Necklace. Wire Wrapped Leather DIY Bracelet. Simple and Elegant Wire Ring.
How do you make strong beaded bracelets?
To make a long-lasting elastic bracelet, follow these other tips: Stretch your cord before stringing any beads. Make your bracelet the correct size. Tie your knot with some tension in the bracelet. Tighten your knot from all sides. After cutting the elastic cord, add a dab of glue to the knot.
What type of wire is used for beading?
For the highest degree of flexibility 49 strand beading wire should be used, with 19 strand beading wire for designs that require good flexibility, and 7 strand beading wire used for designs that require some flexibility.
How do you wire wrap stones for jewelry?
Instructions Twist the Wires. Hold the two wires together, find the middle, and twist them around each other. Place Your Stone. Shape the two wires at the bottom of the twist to create a V. Wrap and Twist Some More. Cross and Continue. Create a Bail.
Is copper wire good for jewelry?
Because of its durability, copper is an excellent metal used for jewelry making. Also, the metal does not rust easily.
How much wire do you need to make a wire ring?
to make 1 ring: Soft or half-hard round wire, in 16-, 18- or 20-gauge. You’ll need a piece that’s somewhere between 3″ (7.6 cm) and 5″ (12.7 cm) long, depending on how big you’d like to make your ring, and how fancy you plan to get with the two ends of it.
What are the different pliers needed in making jewelry?
Types of Jewelry Pliers Flat Nose Pliers. Round Nose Pliers. Chain Nose Pliers. Bent Nose Pliers. Flat & Half Round Pliers. Flat & Round Pliers. Concave & Round Pliers. Wire Wrapping Pliers.
Can you use welding wire for jewelry?
All welding wires for gold and platinum alloys consist of standard jewellery alloys with the requisite degree of fineness. For typical applications in jewellery production and repair, the welding wires must be processed such that these are very thin, in order that the wires can be metered and applied with low power.
Does artistic wire tarnish?
Artistic Wire is an enamel-coated copper wire available in a wide variety of colors, which is available by gauge. It is tarnish resistant and can be used for wire wrapping.
What does dead soft copper wire mean?
Dead soft wire is extremely soft and pliable. It can be easily bent and is excellent for making rounded shapes such as spirals. It is also excellent for wrapping wire around beads to make them look as though they are encased.
