Table of Contents
How much fabric do I need for a swag valance?
Swags – Based on an average of 44″ per swag, you will need 2 yards of fabric per swag. Jabots – Double the longest length, add 4″ and divide by 36. This will give you the number of yards needed for a single pair of Jabots.
How do you make a window swag?
How to Sew Window Swags Measure the width of the window between the ends of the curtain rod or swag knobs. Cut a piece of fabric 24 inches wide and to the length you measured. Lay the fabric right-side down on your work surface. Sew a straight stitch along the fold to secure it in place.
How do you do the fishtail swag?
Lay your pressed fishtail swag on a flat work surface with the lining side up. Then fold accordion style. Each fold should be about 4 inches wide (as shown). You should end up with the patterned side down on the bottom fold and the patterned side up on the top fold.
How long should swag curtains be?
A general rule of thumb is that a swag 45-inches across the top edge requires about 2 yards of fabric. Online fabric calculators, or pattern envelopes, provide the exact amount of fabric required based on fabric type and pattern, mounting method, fabric width and swag measurements.
What makes a good swag?
Good canvas swags are made from a blend of cotton and polyester fibres. This creates a finished material that is breathable, rot-proof and water-proof. Heavy Duty ripstop means that nylon has been added to the weave giving an even better strength-to-weight ratio.
How do you measure material for valances?
Measure Twice, Cut Once A retractable metal tape measure offers the best tool for calculating the amount of fabric needed to go across a window valance. Measure from one end of the rod to the other, whether the rod is mounted inside or outside of the frame.
How do you make a flower swag?
Step 1: Cut all of your greenery and flowers to shorten the stems. Step 2: Use floral wire or green plastic zip ties to secure the stems together, building up more stems as you go. Step 3: Use pliers or wire cutters to tighten and trim the ends of the wire or zip ties.
How do you measure for fishtail swag curtains?
Measure the width of your window and the length of your drop. Your drop is how far from the hold back point you want the sides to fall. This is typically 1/2 to 2/3 the length of the actual window. If the width of your window is 30 inches and your desired drop is 35 inches: 30 + 35 + 35 + 4 = 104 inches.
How do you fold a valance?
How to Fold a Valance Sheet First you need to hold the sheet from end to end. Now bring right hand to left and fold the corner over the other. Take the next corner and fold it over other two corners. Now lay down the sheet on flat surface and fold the two edges inside, all the elastic should be hidden.
How do you make swag curtains with rosettes?
Pull a puff of swag fabric through the opening. Move the rosette out of the way temporarily and wrap a rubber band around the puff to secure the fabric. Put the rosette over the puff of fabric and fluff out the fabric to hold the rosette in place and hide the rubber band and the inside edge of the rosette.
Are swags still in style?
Modern Flat Swags It seems like a misnomer that swags can actually be flat, since the term of swag is thought of as a fabric that drapes luxuriously. The recent push in designer valances are including tailored, flat valances as a popular item in 2021 and in the future.
How do you wear sheer over a rod?
Wrapping Around Curtain Rod Lay the sheer out straight and fold it in half. Place the center of the sheer on the center of the curtain rod and attach with a large binder clip or a piece of masking tape. Wrap the sheer over the curtain rod several times on each side of the binder clip.
What size valance do I need for a 60 inch window?
Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.
How long should a valance be for a 36 inch window?
To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.
How much wider Should a valance be than the window?
Most valances should only be 1-1/2 to 5 inches wider than the window if the valance hangs by itself or over a Roman shade. It should be 10 to 30 inches wider than the window if it’s hung over a pair of custom drapes. If the valance is gathered, its total, flat width should be 2 to 3.5 times the width of the window.
