Table of Contents
How much fabric do I need to make a window valance?
The obvious answer is that it depends, but you should expect to need somewhere between 1-1/2 to 5 yards of face fabric for a standard 36- to 40-inch window. For double-wide windows (about 70 to 80 inches wide), about 2-1/2 to 8 yards of face fabric is a realistic estimate.
How long are valances usually?
It depends on the style of the valance, as well as how it’s installed and how high the ceiling is. Outside-mounted valances usually have an average drop length of 17 to 21 inches if hung on walls with 8-foot ceilings, and that length gets proportionately longer as the ceiling gets taller.
How long should you make a valance?
The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining.
How wide should a valance be for a 36 inch window?
To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.
How tall should a window valance be?
For most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.
What does a tailored valance look like?
Tailored valances are often just a few inches wider than the window. Here, a 40-inch window was dressed with a 42-inch valance. Ring top valances like this goblet pleat valance can be tailored, too. Even though the valance hangs casually and can be adjusted on the rod, this adjustment is limited to just an inch or two.
How do you make a Sheffield Valance?
How to Make a Sheffield Valance Measure and mark the width of your window and add one inch for a hem on each side. Measure and mark for how long you want the valance to hang and add at least two inches for a hem. Cut the fabric according to your measurements and pin the pleats in place.
What can I use instead of a valance?
Tablecloth Linens. A crafty homeowner can whip up a window treatment with any textile—even table linens! Debbie from Debbie Doo’s took pretty cloth napkins and hung them from a rod using curtain clips. The result is an easy and cheerful alternative to a traditional valance.
How do you make fabric pelmets?
Step 1: Measuring for Size. Measure your window where you would like the pelmet to sit. Step 2: Cut Foam Core/Plywood. Now it is time to begin cutting the foam core which will form the structure of your curtain pelmet. Step 3: Cover with Quilt Batting. Step 4: Cover with Fabric. Step 5: Fit to the Wall.
What widths do valances come in?
If you’re shopping for ready-made valances, the most common standard size you’ll likely come across is a 50-inch wide valance. If you’re hiring a custom workroom, you can specify any size. We offer valances between 18 and 189 inches wide on our site.
How many waterfall valances do I need?
When you’re measuring a window for multiple waterfall valances, each valance layer should measure double or triple the width of the window dimensions to create a full, luxurious, stacked appearance. For example, if your window is 54 inches wide, select valance widths ranging from 108 inches to 162 inches.
Can you use a valance with blinds?
Valance over drapes is quite common, imparting a regal and luxurious feel to the rooms. Valances can, however, be also paired with blinds and shades. You have to choose the color and design judiciously to pull off the look that you want to create.
What is a valance sheet?
A valance is a decorative sheet that hides the base of your bed, a bit like a skirt. A Sheet Valance covers the mattress and the bottom of the bed and is fitted over the mattress, acting as the fitted sheet as well as the Valance.
What size valance do I need for a 40 inch window?
Our example window is 40 inches wide, including the window frame. That means that the valance should cover a total width of about 42 to 44 inches once gathered. Using a 2- to 2-1/2 times fullness calculation, that means that the valance (when laid flat) needs to be between 84 and 106 inches wide.
Do you need a double curtain rod for a valance?
We recommend using two single curtain rods of 1″ – 2″ in diameter: the top one is for the valance with swags and tails, and the lower one for the two curtain panels. This way, you have more flexibility in adjusting height, width and projection (distance from the wall).
How wide should a valance be for a 24 inch window?
Opt for valances of 24- to 36-inches deep for opulent styles, such as board-mounted swags. The overall width of a valance should be between 3 to 4 inches wider than the window or treatment it covers. If used alone, frame the window opening within a few inches.
How deep should a curtain valance be?
Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.
How are rod pocket valances measured?
Measure from the top of the curtain rod down to where you want the curtain to fall. The length of the curtain includes the rod pocket, but not the heading.
