Table of Contents
DIY String Light Pole Step 1: Gather Materials. Step 2: Cut 2x2s to Desired Post Height. Step 3: Stain or Paint Poles. Step 4: Let Dry. Step 5: Mark & Cut Forming Tubes. Step 6: Close-off One End of Each Tube. Step 7: Mix Concrete. Step 8: Fill Molds With Concrete.
How do you make string light posts?
Step 1: Mix Concrete in Barrel. The concrete should fill about 1/2 to 3/4 of the barrel to provide enough stability for the posts. Step 2: Insert and Support Post. Step 3: Add Drainage Holes to Planter. Step 4: Fill With Gravel, Soil + Plants. Step 5: Add Hooks. Step 6: Enjoy.
What kind of pole do you use to hang string lights?
Long vertical poles secured with concrete footings are an easy way to support twinkling string lights and are sturdy enough to stay up for the entire summer season. A little carpentry work and a few basic supplies are all that’s required, and this DIY project can be done in one day.
How tall should a string light pole be?
We wanted our poles to be at least 8′ tall to allow for the lights to swag and hang down without hitting our taller friends in the head. They’re going 2′ into the ground, thus 10′ long poles.
How do you put posts in ground for string lights?
Decide where you want your posts, and how many you need. Make sure you buy pressure-treated lumber! Dig the holes for your posts. How far do you go down? Mix and pour cement. We used 4o pounds per post. Add the pipe to your post by using your drill and 7/8 in. Hang your lights! Add the flowers!.
Can I use PVC pipe to hang string lights?
It can be a little tricky when hanging lights on a slope. You will want to dig an 18″ hole and then place a PVC Pipe into it. Just make sure it goes below the grass line. We used a level to help guide the pole around and make sure it was straight up and down.
How do you hang string lights indoors?
Hanging String Lights Indoors One secure option that works for most walls is to use a hammer and nails. Leave a part of the nail protruding from the wall and drape the string lights over the nail. If you are hanging fairy lights, a thumbtack should be enough to support the weight of the lights.
How do you hang string lights outside without trees?
7 Ways on How To Hang String Lights in Backyard Without Trees Hanging Lights on 4X4 Posts. Using Metal Pole and PVC. Along the Fence Lighting. Deck Lighting. Gazebo or Pergola or Covered Patio String Lights. String Lights on Umbrella. Use Planters to String Backyard Lights.
How do you attach string to fence lights?
Attach metal mounting hooks or cup hooks onto the wooden posts. These hooks will hold your string lights so you want to be sure that you secure them firmly. Screw your mounting hooks or cup hooks into the wooden posts at one end. Install the posts onto your fence to support your lights.
How far can string lights span?
From 10 feet to 400 feet in length, patio string lights can be used pretty much wherever and however the mood strikes you.
How do you put guide wire on string lights?
Let’s walk through it. Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. Step 2: Mount Screw Hooks. Step 3: Connect & Tighten Cable. Step 4: Attach Your String Lights. Step 5: Sit Back and Enjoy!.
Are string lights safe for bedroom?
String lights aren’t just for holidays, weddings, and outdoor decor. They can actually go a long way in providing a warm, ambient glow in almost any room of your home—especially bedrooms. And while some are certainly more ideal for kids and teens, many modern options are anything but juvenile.
How far apart should posts be for string lights?
The average spacing between sockets on a patio light string is at least 12 inches. However, spacing can range from 12 inches to 3 feet wide.
Can you hang lights from conduit?
By using EMT conduit and PVC conduit, you can hang beautiful string lights over your patio inexpensively. Next, secure the EMT into PVC ‘holders’. After that, all that’s left to do is string up the lights!Jun 24, 2020.
How do you hang indoor string lights from the ceiling?
Start from the hook closest to your outlet. Run the lights across your ceiling to the other side across the length of your ceiling. When you reach a hook, pull the lights tight and coil the string once around the hook. Continue working in a zig-zag pattern until you’ve covered your entire ceiling.
How do you hang lights indoors without nails?
If you don’t want to use nails, try attaching the lights to adhesive hooks or clips. You might also be able to get them to stay up with a few pieces of transparent tape spread out along the string. Picture hooks, nails, or heavy-duty staples will also work if you don’t mind making holes in the wall.
