Table of Contents
What kind of wood do you use to make shutters?
Cedar is the most common material for construction of exterior shutters because of its resistance to both insects and decay. It is a straight wood that finishes very well and can withstand harsh outdoor conditions well.
How thick should wood be for shutters?
Thickness, Width, Height Our default standard thickness is 1 5/16″, but that can be varied from 7/8″ to 2 1/4″ to match existing exterior shutters. The length and height can be specified to the nearest 1/16″ inch.
Can I make my own shutters?
Bought wood shutters can be extremely expensive – but if you don’t want to spend lots of money, you can just make your own. If that sounds like the kind of solution you’re looking for, this plan will show you how to build shutters yourself – while spending less than $40 on the project.
How do you make exterior wooden shutters?
What kind of wood do you use for board and batten shutters?
Western Red Cedar is the most common material for building exterior board and batten shutters in the industry. Cedar has many of the same qualities as Redwood, yet is less dense, making it easier to sand and finish.
Is MDF good for shutters?
MDF is a much cheaper material than “real” wood, and therefore MDF shutters cost much less than wooden shutters. The robustness of MDF window shutters also make them particularly suitable for playroom or children rooms. MDF shutters are less prone to dent and scratches.
What are exterior shutters made of?
Exterior window shutters come in four basic types: paneled, louvered, board and batton (sometimes called BnB) and Bermuda. They are available in a variety of materials including MDF (medium density fiber), vinyl, synthetic foam, faux wood and wood. Basswood is the most popular wood for shutters.
How wide should board and batten shutters be?
Building Board and Batten Shutters Go ahead and cut all of your boards to length on a miter saw, and then make any rips that you need to accommodate the width of your window. Each batten will run diagonally across the boards and should be just shy of the width of your shutter.
How wide should board and batten be?
The battens should butt tightly against the top trim board and be flush at the bottom with the wider vertical boards. While the width of the battens is your choice, they should be wide enough to overlap the edges of the larger boards by at least ½ inch on both sides.
Which shutter material is best?
Similar to wood in appearance, poly (polypropylene) shutters are thought to be the best choice for a synthetic shutter. They are known for being moisture resistant. Poly shutters are an ideal choice for rooms such as bathrooms, basements, laundry rooms or garages.
What is the difference between plantation shutters and regular shutters?
Plantation shutters have wider louvers, ranging in width from 1 7/8 to 5 ½ inches. The louvers are either flat or elliptical in shape. Elliptical louvers are stronger than flat louvers and resist sagging. Traditional shutters have narrow wedge-shaped louvers that are only 1¼ inches wide.
How much should shutters cost?
Wood shutters cost $200 to $350 per window, while faux or composite shutters cost between $70 and $260 per window.Average Cost of Plantation Shutters. National Average Cost $2,350 Average Range $1,450 to $3,360.
What do I need to build shutters?
DIY Board and Batten Window Shutters Wood (cedar or pine work fine) – 1″X 6″ boards. Make sure they are nice and straight. Nails. Wood glue. Miter saw (or get them cut at your local home improvement store) Decorative Plastic Hinges.
How do you attach wood shutters to stucco?
Using metal screws with painted heads is an alternate method to install exterior shutters on all types of siding, stucco and masonry. Use a drill with a multi-purpose 11/64-inch bit to pre-drill holes through the shutter for the screws at each reference mark. Reposition the shutter on the wall.
Can you paint cedar shutters?
What’s the best way to prep and paint new cedar shutters? A. After the shutters have thoroughly dried, prime them with a high-quality latex primer. Next, if you’re top-coating in a light color, spray a very light fog coat of a stain-blocking alkyd primer on the front of the shutters.
What are the four types of shutters?
Exterior window shutters come in four basic types: paneled, louvered, board and batton (sometimes called BnB) and Bermuda.
How long do exterior wood shutters last?
These shutters can last up to 20 to 30 years (or another 30 years if stripped and recoated!), for an affordable price, with little maintenance.
Are exterior window shutters outdated?
Today, shutters are used extensively all over the world, for functional and aesthetic purposes. Do all houses need shutters? Absolutely not, and many, many houses would look much better without shutters, rather than with “today’s” shutters.
Are board and batten shutters popular?
Existing on historical cottages, European homes, and early American colonials for centuries, these classic shutters continue to be a popular choice, especially when the homeowner wants to create a rustic or modern farmhouse feel.
What is the difference between shiplap and board and batten?
Shiplap and Board and Batten are two different wooden wall treatments. Shiplap refers to wooden boards of the same width with grooves that help each board fit together tightly, while board and batten refers to boards of different widths installed with space between, usually vertically.
Can you use plywood for board and batten siding?
Board-and-batten can be installed onto solid plywood or OSB sheathing. If your sheathing is not solid, you will need to first attach horizontal furring strips. With a helper, expect to spend a day installing 800 square feet of siding.
Do you caulk board batten?
For cement board and batten siding, installation requires the battens to be caulked.
What is better wood or vinyl shutters?
When choosing between wooden shutters vs. vinyl shutters, wooden shutters are the better choice. They look authentic and are more durable and versatile than vinyl shutters.
