Table of Contents
Step-By-Step Instructions to make rustic shutters Step 1 – Glue Boards together. Line up 3 36-inch 1×4’s and add glue to the inside edges of the boards. Step 2 – Glue the horizontal boards. Step 3 – cut and glue your angle board piece. Step 4 – add finishing nails (optional) Step 5 -Finishing your rustic shutters.
Can I make my own shutters?
Bought wood shutters can be extremely expensive – but if you don’t want to spend lots of money, you can just make your own. If that sounds like the kind of solution you’re looking for, this plan will show you how to build shutters yourself – while spending less than $40 on the project.
What kind of wood do you use to make shutters?
Cedar is the most common material for construction of exterior shutters because of its resistance to both insects and decay. It is a straight wood that finishes very well and can withstand harsh outdoor conditions well.
How do you paint vintage shutters?
How to Paint Wood Shutters Thoroughly stir paint to an even consistency. Pour some paint into a paint tray. Using a wide, flat brush, paint with the grain of the wood. Work in thin layers. Once the shutters are fully dry, you can put them back up.
How thick should wood shutters be?
Thickness, Width, Height Our default standard thickness is 1 5/16″, but that can be varied from 7/8″ to 2 1/4″ to match existing exterior shutters. The length and height can be specified to the nearest 1/16″ inch.
Can you use untreated wood for shutters?
There are definitely more than one way to construct and hang shutters – I am simply sharing how we did it! Supplies needed to build shutters: Untreated Pine (we used 1.5 inch thick pine wood for the backboards and 3/4 inch thick pine for the cross board)Sep 21, 2016.
What kind of wood do you use for board and batten shutters?
Western Red Cedar is the most common material for building exterior board and batten shutters in the industry. Cedar has many of the same qualities as Redwood, yet is less dense, making it easier to sand and finish.
Should shutters be the same size as the window?
For the most authentic look, we recommend measuring only the window opening not including any frame or trim around it. Typically, the width of your shutters should be half of your total window width. Keep in mind that the shutters should look like if they could close to cover the window.
What paint to use for whitewashing wood?
We recommend a water and paint mixture. It’s super easy to mix and apply, and it’s budget-friendly. Mix white, latex paint with water in a 1:1 ratio, which will give you a nice, transparent look. Test on a scrap piece of wood or an inconspicuous area, then adjust the ratio to your liking.
What do you seal wood shutters with?
Use an adhesive exterior caulking sealant to secure the cap to the top of the shutter and to weatherproof. Exterior wood shutters must be primed before they are painted. We recommend using an oil-based primer that is tinted as close to the final color as possible and using a spray system to apply.
Can you paint shutters with a brush?
The best way to paint shutters, both interior and exterior types, is to spray them, using either canned spray paint or an airless power sprayer. But, because that’s not always possible, you can still get a quality finish on old shutters by using a brush. Paint the louvers first with a 1/2- or 1-inch trim brush.
Can you paint shutters without taking them down?
Can you paint shutters without taking them down? Yes, you can if you are careful and properly mask off the surrounding areas with painters tape and plastic. Or if you prefer to paint your shutters with a brush.
Why do my shutters say do not paint?
If you select paintable, yes it can be painted. If you order a pre-colored shutter we do not recommend painting the shutters. The reason for this is due to the fact that they are made from slightly different plastic materials. our paintable shutters are designed for excellent paint adhesion.
Is MDF good for shutters?
MDF is a much cheaper material than “real” wood, and therefore MDF shutters cost much less than wooden shutters. The robustness of MDF window shutters also make them particularly suitable for playroom or children rooms. MDF shutters are less prone to dent and scratches.
What is polymer shutters?
Housing an aluminium core that provides increased strength and durability, these blades won’t crack, split, chip or warp. Allure Polymer Shutters have the aesthetic appearance of real wood, they’re fire retardant and are made from a solid, non-toxic, recyclable material.
How long do pine shutters last?
Wood shutters are relatively long-lasting AND they can be repainted. Generally speaking, you may get anywhere from 10 to 20+ years out of use out of your shutters. However, they are more vulnerable to rot, termites and moisture damage comparatively.
How wide should board and batten be?
The battens should butt tightly against the top trim board and be flush at the bottom with the wider vertical boards. While the width of the battens is your choice, they should be wide enough to overlap the edges of the larger boards by at least ½ inch on both sides.
How wide should board and batten shutters be?
Building Board and Batten Shutters Go ahead and cut all of your boards to length on a miter saw, and then make any rips that you need to accommodate the width of your window. Each batten will run diagonally across the boards and should be just shy of the width of your shutter.
How far should shutters be from window?
In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim. If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract.
