Table of Contents
What kind of hooks do you use for a pegboard?
Most pegboard holes are 1/4 or 1/8 of an inch in diameter. If you have a “small hole” pegboard, then you’ll need pegboard accessories with 1/8-inch hooks. Standard pegboards with 1/4-inch holes can usually use 1/4-hook accessories along with smaller 1/8-inch hooks.
What are pegboard hooks made of?
They are made of hardened steel coated with nickel to reduce rusting and corrosion. They are an excellent fit for any standard sized pegboard. The hooks will fit on holes with a thickness of 3/16 inches, ¼ inches, or 1/8 inches.
How do you hang pegboard without furring strips?
Insert a screw with a washer into each marked hole on the pegboard, then fit a spacer onto each screw, on the back side of the pegboard. Position the pegboard against the wall and drive each screw into its corresponding anchor or into a wall stud. If you’re not using a spacer kit, use 2-inch washer head wood screws.
Are Pegboard hooks standard?
Pegboard hole spacing is standardized so the hooks will fit. What is NOT standardized is the hole size. There are 1/8; 3/16; and 1/4 pegboards out there. These hooks will fit the 1/4 and probably the 3/16 holes.
What diameter are Pegboard hooks?
Pegboard hooks come in two sizes, 1/4 inch and 1/8 inch, which is the measurement of the diameter of the wire used to make the pegboard hook. You can use smaller 1/8 inch pegboard hooks in the larger 9/32 hole pegboard holes, but you can not use the 1/4 inch pegboard hooks in the smaller 3/16 hole pegboard.
How much weight can a pegboard hook hold?
Pegboard manufacturers state the standard 3/16″ pegboard can safely hold 100 lbs of weight. The pegboard I tested showed a single peg can hold over 150 lbs without tearing or pulling away from the wall.
Why are pegboards so expensive?
Wood pegboards are the most expensive type of pegboard because they have a decorative look. Metal pegboards are usually made of aluminum or stainless steel. Because of how heavy these panels are, they’re strong enough to hold large tools.
How do peg board hooks work?
Pegboard hooks have small barbs that lock into holes on both sides of the hook to keep them in place. Another approach is to add a dab of hot-melt glue to the lower leg before slipping the peg into the hole. The glue will hold well enough to keep the hook in place, but it will be removable later with a light tug.
Do you need furring strips for pegboard?
Most pegboards need wooden furring strips mounted on the back to provide a gap so the pegs or hooks will fit properly. Use the pegboard measurement to determine the number of 1- x 2-in.
What do furring strips look like?
If you’re unfamiliar with what a furring strip is, it’s best described as a long, slender strip that’s constructed from either wood or metal. In most cases, furring strips are 1” x 2” or 1” x 3” in size and can be applied both horizontally or vertically.
How do you make a peg board wall?
Step 1 – Locate Wall Studs to Attach Pegboard. Step 2 – Cut and Attach 1×3 Around the Perimeter of DIY Pegboard Wall. Step 3 – Attach the Middle 1×3 Boards. Step 4 – Frame Around Wall Plug. Step 5 – Install the Largest Pegboards Pieces First. Step 6 – Install the Remaining Smaller Pegboard Pieces.
What is standard pegboard?
Pegboard is produced from hardboard and HDF (High Density Fiberboard). Standard patterns offered are 1″ x 1″ OC, 1/2″ x 1/2″ OC, 1″ x 2″ OC, and 1″ x 3″ OC. Hole sizes are 9/32″ diameter (nominal 1/4″) and 3/16″ diameter (nominal 1/8″).
What are pegboard hooks used for?
A new and innovative way to secure pegs and hooks to a pegboard. These peg locks are easy to use and hold the peg or hook in place. Pegitz peg locks hold the peg or hook in the hole so it is less likely to fall out when an item is removed. It is removable, reusable and helps to preserve your favorite holes.
What thickness is pegboard?
Two common thicknesses for pegboard hangers are 1⁄8″-dia. and 3⁄16″-dia., both of which fit into standard pegboard hole configurations.
How do you keep Pegboard hooks from falling off?
To ensure hooks won’t fall out of your board, you have 4 options: Get the perfect hooks with double peg attachment and appropriate thickness for your board. Use metal wire to secure thin hooks. Use glue or a zip tie to secure the thin hooks to your board. Use plastic peg locks.
How do you hang heavy tools on a pegboard?
Hang a Pegboard Storage Wall Step 1: Find the area where you want to put your pegboard. Step 2: Locate the studs in your wall using a stud finder and mark them with a pencil. Step 3: Mount your pegboard in place and secure it via the studs. Step 4: Finish securing your pegboard to the wall with standard drywall screws.
What material is best for pegboard?
Acrylic pegboard is a good choice for the sake of durability, but wood and fiberboard pegboard systems are simple enough to make from scratch. Metal pegboard systems are great for heavier loads, but they are more expensive and require a sturdier means of support to mount them.
Which peg board is best?
Best Overall: Dorman Hardware 29993 Plastic Pegboard. Best Metal: Wayfair Basics Steel Pegboard Panel, Set of 2. Best for Garages: Wall Control Galvanized Steel Pegboard Pack. Best for Tools: Seville Classics Steel Pegboard Set, 24 x 48 inches. Best for Kitchens: Umbra Peggy Adjustable Storage System For Kitchen.
