Table of Contents
Select a map, place a square or circle of tile over an area and use a pencil to trace around it. Cut the maps and trim to fit the tiles as needed. Coat the tops of the coasters with Mod Podge and set aside to dry for at least one hour. Once dry, your map coasters are ready to keep marks off your furniture.
How do you make coasters on a map?
How to Make DIY Custom Coasters From Maps: Cut the desired area of the map with scissors. Mod Podge (or glue) tile. Glue down edges. Smoothe layer of glue over the top of the map. Let dry. Spray with acrylic sealant. Cut felt backing. Hot glue felt to the bottom of the tile.
What do you put on the bottom of a ceramic coaster?
As a final touch, attach felt squares to the bottom of your coasters with glue or double sided tape. Some craft stores even sell adhesive-backed felt which makes it super easy. You could also use cork-board instead of felt.
How do you seal ceramic coasters?
Apply 2 coats of a clear spray sealer to the coasters to seal and waterproof them. Make sure to do this in a well ventilated area. Spray the top, sides, and bottom side. Let the sealer dry for 20 minutes or so.
What goes on the bottom of a coaster?
Bumper Specialties rubber bumper feet have many applications, including rubber feet for coasters. This particular application is most popular with granite, glass, and ceramic coasters. Our bumper stops strongly adhere to the bottom surface of the coaster to keep the coaster from slipping or sliding on the tabletop.
How can I make my coaster waterproof?
You’re going to want to coat the image and coaster with at least three coats of Mod Podge, allowing it to dry for 15 minutes (or until clear) between coats. Once the final coat has dried, spray all of the coasters with a clear acrylic gloss spray, which ensures that they’re waterproof/drink proof.
Can Mod Podge be used on ceramics?
Dishwasher Safe Mod Podge is the decoupage formula that you can apply to glass, ceramic, and metal – and then you’ll be able to wash the item. This water based formula is indoor/outdoor durable (though I typically use Outdoor Mod Podge for outdoor projects).
How do you transfer pictures to coasters on tiles?
Cut your photo so that there’s minimal white space around the edges. To prep the tiles, wipe with a damp towel to remove any dust. Brush a light coat of Mod Podge on both the tile and on the photo (the front of the photo, NOT the back). Place the photo onto the tile, taking care to line up the photo with the tile.
How do you make Modge podge tile coasters?
Instructions Select your tiles and remove dirt and dust. Tear or cut paper into a square that almost, but doesn’t completely, cover the top of the tile. Add Mod Podge to the top of the tile in a medium layer. Apply a top coat of Mod Podge over the top of all tiles; let dry and apply another coat.
How do you seal acrylic paint on coasters?
While Mod Podge is a great start to waterproofing a coaster, it’s not perfect. To finish everything off, add a layer of clear acrylic gloss spray to your coaster. The extra layer will help solidify everything to keep out liquid. After the layer dries, you can use the coaster for anything from water to alcohol.
How do you make coasters non slip?
Tip: Use Fabric Paint to Create Non-slip Surfaces Make coasters with recycled CDs, felt, and dabs of paint on bottom. They won’t move around on you! Add a few stripes to the soles of slippery tennis shoes or flip flops. Or add it to the bottom of slipping cutting boards.
How do you package coasters?
Re: Shipping tile coasters? Cut three pieces of foam to fit into the box. Secure two coasters to two pieces of the foam with a ring of tape on the underside. Wrap the two pieces of foam with the cellulose wrapping film to secure them in place. Fold the box. Seal the box and send at the flat rate,.
Is Mod Podge waterproof for coasters?
If you didn’t know, Mod Podge isn’t fully waterproof – nor is it heat proof. If you want to make your coasters waterproof and heat proof, Engine Enamel is what the pros use. What is this? If you’re ready to jump in, let’s do it!Oct 25, 2021.
How do you seal vinyl coasters?
We used Mod Podge with a Gloss finish to seal and coat the vinyl on these DIY ceramic coasters. In this case the Mod Podge’s main job is to seal the vinyl to the tile so it doesn’t easily peel off with wear and tear. You might want to do 2-3 layers of Mod Podge for the best result.
How do you waterproof wooden coasters?
Answer: Polyurethane or spar varnish. Use 2-3 coats of each over your wooden coaster. In terms of waterproofing, these two are the best. Just try not to spill a lot of alcoholic beverages over your coaster.
How do you seal concrete coasters?
Seal your coaster with a concrete sealer. We used Acrylic Water-based Sealer for its durability and low odor. Apply the sealer in thin, even coats with a foam brush. Be sure to coat the edges as well.
Can I use Mod Podge to seal acrylic paint on ceramic?
To seal acrylic paint to a ceramic surface, you need to heat cure the paint. Instead of letting it air dry, you want to bake the painted piece, then seal the paint with a water-based polyurethane varnish, clear acrylic coat, or modge podge.
Can you use Mod Podge on coffee mugs?
Make sure the surface of the mug is clean and dry. 3. Using a small paint brush, coat each cut-out with a light amount of Mod Podge and stick them to the mug wherever desired. The Mod Podge is clear once dry, so just give the mug some time and enjoy!May 24, 2012.
