Quick Answer: How To Make Lye Soap From Lard

Table of Contents

Weigh your caustic soda according to the recipe from the soap calculator. Melt the lard in a pot on the stove until it reaches between 37°C and 51°C. In a well ventilated area, add the weighed caustic soda/lye to the water, stirring as you add it. Let the lye mixture cool until it too reaches between 37°C and 51°C.

How do you make lye soap from animal fat?

Method: Combine the lye with your liquid. Allow the lye solution to cool to between 38C-45C (100F-125F). Heat the fat gently until completely melted. Combine the lye solution and the melted fats. Add the essential oils or other aromatics and mix in. Pour the mixture into your soap moulds.

How do you make homemade lye soap?

Instructions Weigh the Water and Lye. Put a container on the kitchen scale and zero out the weight. Add Lye to Water. Slowly add the lye to the pitcher of water (not the water to the lye), being careful not to splash. Cool the Lye Mixture. Weigh and Melt the Oils. Add Lye to Oils. Add Fragrance Oil. Mold the Soap.

How do you make old-fashioned lye soap?

How To Make Lye for Soap the Old-Fashioned Way Supplies you’ll need. Step 1: Gather ashes. Step 2: Place the barrel on a stand. Step 3: Drill a small hole at the base of the barrel. Step 4: Place rocks or bricks in barrel. Step 5: Add straw. Step 6: Add hardwood ashes. Step 7: Add water.

How much lye do I need for lard soap?

Becky’s recipe calls out for 40 oz lard, 5.4 oz lye and 13.5 oz water. This ratio is what I use, but her recipe makes more soap than an average family might use in a year.

Can you use lard in soap making?

Lard and tallow are popular soapmaking ingredients. Lard and tallow give soap firmness and contribute to a stable lather. Because of these properties, both tallow and lard are common substitutes for palm oil. Lard and tallow can be purchased from the store, or you can render your own at home.

Can you make soap out of human fat?

In March 2019 at the Adelaide Festival in Australia, Dutch Artist Julian Hetzel is going to be selling bars of soap. But no ordinary foamy shower tools, these ones are made by extracting human fat through liposuction, which is then turned into soap.

Can I make my own lye soap?

To make handmade soap, all you need is fat, water, and lye. For the fat, you can use tallow, lard, or palm oil depending on what is most accessible to you. Some natural soap recipes use coconut oil or olive oil as well. This DIY soap recipe uses 2 pounds of tallow, 10 ounces of filtered, pure water, and 4.4 ounces lye.

How do you make free lye soap?

The main way that you can make soap without handling lye is by using melt-and-pour soap. It’s already been through saponification (oils reacting with lye) and is safe to use and handle straight out of the package. All you do with it is melt it, add your scent, color, and other additives, then pour it into molds.

How long does it take to make soap with lye?

These temperatures are a general rule, if the fat is a bit warmer and the lye a tad cooler, it will still work out. While stirring the fat in your plastic bowl with a plastic or wooden spoon, slowly stream in the lye solution. Stir constantly until it is thick like a Slurpee. This will take from 30 minutes to one hour.

Why are wood ashes needed for soap?

You see, lye (sodium hydroxide) is formed when wood ash (which is mostly potassium carbonate) is mixed with water. The mixed solution is extremely alkaline and if it comes in contact with your skin, it begins to absorb the oils and turns your skin into soap.

How did farmers make soap?

On the homes or farms where butchering was not done, soap was generally made in the spring using the ashes from the winter fires and the waste cooking grease, that had accumulated throughout the year. In making soap the first ingredient required was a liquid solution of potash commonly called lye.

What happens if you put too much lye in soap?

There are two common issues people run into when making soap: not enough lye or too much lye used. Too much lye will result in a bar whose pH is too high and can cause skin irritation and burning. Not enough lye can result in oils going rancid, causing discoloration and bad odors.

How long does it take to trace lard soap?

It can take about 5 minutes until the soap reaches trace or around 15 minutes if you stir with a wooden spoon. If you want to add fragrance, now’s the time to do it. Give it a quick whizz to mix in the essential oils.

Which is better for soap making tallow or lard?

Tallow or lard for soap Both tallow and lard are great for soap making. They are stable fats that produce rich, creamy lather with nice cleansing properties. I personally like to choose tallow for soap making, just because of the higher nutrient content.

What is the ratio of lye to oil in soap making?

Divide the amount of lye by 0.3 and then subtract the amount of lye from the result. For example, to make just over 2 pounds of olive oil soap, measure 32 ounces of olive oil and 4.33 ounces of lye because 32 ounces of olive oil × 0.1353, which is the saponification value for olive oil, = 4.33 ounces of lye.

Is lard a hard oil for soap making?

Properties of lard in soap Lard and tallow are unsaturated fats which make hard bars of soap. When making a soap batch with pure lard (or a high percentage of lard), you can expect a hard and durable bar of soap with mild yet creamy lather, and a white color. Here’s a look at the properties of pig lard in soap.

How much lard can I use in cold process soap?

While lard can be used at up to 100% of a soap recipe’s oils, it is better at around 60-80%, combined with conditioning and bar-hardening oils such as olive oil, shea butter, or castor oil.