Table of Contents
Add in Some Yogurt Adding yogurt to cooked hot process soap transforms thickish goopy soap into a wonderfully pourable liquid. I also add sodium lactate to my water before adding the lye, and while that is helpful with making the bars harder, rumor has it that it also helps with fluidity.
Can I add sodium lactate to hot process soap?
Sodium lactate in hot process soap It’s used at 3-5% of the oil weight. When you add the sodium lactate is up to you. We add ours to the lye water, but it can also be added while the soap is cooking. Some makers like to add it when it’s finished cooking so their recipe flows right into the mold.
How much water is in hot process soap?
Water amount in hot process soap making That’s why hot-process soap recipes need to use full-water amounts. Standard recipes call for the water amount to be 38% of the amount of base oils used by weight. You can also create a lye solution with a 25% lye concentration – a ratio of 1:3 by weight, lye to water.
What does yogurt do to hot process soap?
Add yogurt once your soap is fully cooked for a fluid batter. Plain greek or regular yogurt is one of the most common additives to help your batter become more fluid. You can add up to 1.5 tablespoons per pound of oils to achieve a looser, easier to swirl batter.
Can you overcook hot process soap?
If the soap gets too high in the pot, take the pot off heat and stir like crazy. Be sure not to overcook the soap; you don’t want too dry a texture for the next steps!Dec 13, 2012.
Can I add sugar to liquid soap?
Different oils give different amounts and different types of lathers, so many soap makers turn to sugar to increase the suds. Adding a bit of sugar to a soap recipe can help make a light, bubbly lather with large bubbles when the oils you’re using do not lather up as much as you’d like.
What is a substitute for sodium lactate?
If you don’t have sodium lactate on hand, you can also add table salt to your lye solution. In the Palm Free Vertical Twist recipe, we used about 1 tsp. of table salt per pound of oils in the recipe…just like using sodium lactate!.
How much yogurt do you add to hot process soap?
Yogurt – Yogurt helps keep the soap fluid. It has properties similar to sodium lactate. You can use yogurt at 1 teaspoon – 1 tablespoon per pound of oils.
How do you make sodium lactate solution?
For a 60% masterbatch that is comparable to the commercial SL liquid, mix 6 parts sodium lactate powder with 4 parts distilled water by weight. To make a 50% masterbatch, mix 1 part SL powder with 1 part distilled water by weight. Stir until the powder is dissolved.
Why is my hot process soap crumbly?
Soap with a dry, crumbly texture could be caused by too much lye in your recipe. If your soap has a crumbly texture, ensure it is not lye heavy. If the pH is safe to use, the crumbly texture could also be caused by soaping with cool temperatures. Soaping cool (100 °F or below) can increase the chance of soda ash.
Can you Rebatch hot process soap?
Whether you forgot an ingredient, a hot process soap rebatch is a great idea for you to try. Plus, rebatching your old soap is a fairly simple process. First, grate your old soap and put these pieces in a crock pot. Then, you will need to melt this down with water and whatever you wanted to include in these soaps.
How do you keep soap batter liquid?
The key to soap batter that stays thin for long enough to create swirls is using plenty of “slow-moving” oils. Slow-moving oils refer to oils that do not accelerate trace. In general, slow-moving oils are liquid at room temperature. Oils that are firm at room temperature will accelerate trace in soap.
How long does it take for hot process soap to harden?
Now, the waiting begins. Most hot process soap will be fully cooled and ready to unmold and cut in about 24 hours. As with any bar of soap, the longer it sits, the harder and better it will be. Letting it sit for at least a week will really make a difference in the overall quality of your bar.
How long does hot process soap need to cure?
Cover the soap and set it aside. It will take 24 to 48 hours to cool down and harden enough to unmold and cut. Since the saponification process is complete, the soap is technically ready to use as soon as you cut it, but like cold process soap, it will benefit from a cure of a few weeks.
What temperature do you add essential oils to hot process soap?
However, fragrance oil and essential oil will both vaporize a bit (or a lot) if you add them when the soap is too hot (200° F or 93° C and higher) so if you want your scent to stick, let the soap cool to less than 180° F (82° C). This can take some time, so cover your soap back up with plastic wrap and wait.
What does adding salt to soap do?
Different oils make your soap harder or softer, depending on their fatty acid makeup. However, many soap makers add a bit of salt to their soap to help increase the hardness. In short, the salt will create a harder bar of soap, though it may not be in the way you expect.
