Table of Contents
Basic Hot Process Soap Recipe (aka Crock Pot Soap) 10 oz olive oil. 20 oz coconut oil. 9 oz distilled water. 4.78 oz 100% pure lye. Essential oils for scent (optional).
Can you make soap in a crockpot?
How long does hot process soap take to cook?
Cooking a batch of hot process soap usually takes between 30-60 minutes. When you make a lye solution, it can reach up to 200°F (93°C), as can oil melted on high in a slow cooker.
Can you make hot process soap on the stove?
Many people like to use an old crock pot, but if you aren’t able to dedicate one to soap making it is okay to use something different. In fact, you can use a stove top and it works just as well. Honestly, your hot process soap will work just fine as long as your soap has a constant heat source.
Can you use the same recipe for hot process and cold process soap?
In most cases yes, an opaque cold process soap recipe should work fine for hot process. If you’re working with a good, reliable recipe, adding heat just speeds up the saponification process.
Does hot process soap need a preservative?
When Do I Need a Preservative? When making cold process, hot process, and/or melt and pour soap, you do not need to adding a preservative is not usually necessary, as the water content “disappears” during the saponification process.
Why is my hot process soap not hardening?
If the soap does not contain enough lye, the oils will not saponify. Another reason for soft soap is there was not enough hard oils or butters (such as coconut oil, palm oil or cocoa butter). If the soap has stayed in the mold for 2+ weeks and is still extremely soft, it will most likely not harden.
How do you make hot process soap more liquid?
Adding yogurt to cooked hot process soap transforms thickish goopy soap into a wonderfully pourable liquid. I also add sodium lactate to my water before adding the lye, and while that is helpful with making the bars harder, rumor has it that it also helps with fluidity.
How do I make hot process soap harder?
Here are five things that can yield a harder bar: Use a water reduction. You need to dissolve lye in water in order to turn oils into soap. Add some wax. A small amount of beeswax added to the melted oils will help harden your DIY bar soap. Add sodium lactate. Increase the olive oil. Add some salt.
How do you wrap hot process soap?
One option is to shrink wrap your soap using Shrink Wrap Soap Bands. Simply slide the soap into the band, apply heat from a heat gun, and the bands shrink down to fit your soap. They work great for soap created in Birchwood Molds (9 Bar, 18 Bar and 36 Bar), 10″ Silicone Loaf Mold and wooden loaf molds.
Can you microwave hot process soap?
Making soap in the microwave is a great way to make a small batch of hot-process soap. It’s probably not any more dangerous than making hot processed soap with any other method.
Which is better hot or cold process soap?
Unlike cold process soap, that lasts for 4-6 weeks, hot process soap can be used immediately after it hardens. However, by giving it a week or so, the bar can harden up considerably and allow an opportunity for the water to evaporate and will make a harder, longer-lasting bar.
What does adding salt to soap do?
Different oils make your soap harder or softer, depending on their fatty acid makeup. However, many soap makers add a bit of salt to their soap to help increase the hardness. In short, the salt will create a harder bar of soap, though it may not be in the way you expect.
What can I use instead of lye to make soap?
The main way that you can make soap without handling lye is by using melt-and-pour soap. It’s already been through saponification (oils reacting with lye) and is safe to use and handle straight out of the package. All you do with it is melt it, add your scent, color, and other additives, then pour it into molds.
What is the difference between melt and pour and cold process soap?
Melt and pour soap base is made via cold process, just like the soap you might make at home. The big difference, however, is that additional ingredients, such as glycerin, are often added. This makes the soap more manageable to work with. Now you can make beautiful bars of soap ready for use in hours, instead of weeks.
Does glycerin act as a preservative?
Vegetable glycerin is used in the food industry as a sweetener and natural preservative.
Is Castile Soap a preservative?
Unlike most liquid soaps, our Liquid Castile Soap Base contains no chemical preservatives, sulfates, or other synthetic additives, making it one of the gentlest liquid soaps available.
Do I need to add a preservative to liquid soap?
Does soap need a preservative? You never have to use preservatives in cold process or melt and pour projects. They have a pH level that doesn’t allow mold or bacteria growth. Liquid soap doesn’t need a preservative either, but you can add one to be extra careful or if you plan to sell it.
Why is my homemade soap not foaming?
Why doesn’t my handmade soap lather? – Quora. Handmade soaps can have different lather forms depending on the carrier oils you using in it. Simple tip is to reduce the super-fat oils( superfat oil in soap-making refers to free oil in the soap after the saponification process), too many oils will cut down the lather.
How do you Rebatch crumbly soap?
Process Weigh your soap, then add to the glass baking dish. Add water to the soap. Cover and bake at 200°F for 30 minutes. Stir, then bake another 30 minutes. Remove from oven and add any additional ingredients you wish. Spoon into molds. Cool and remove from mold(s). Cure for 3 weeks or so if you used fresh soap.
How do you know if your soap is lye heavy?
The first test – the “zap test” – is nice and simple. It involves tapping the soap lightly on your tongue. It sounds weird, but it totally works. If it “zaps” you, it is likely lye heavy.
