Table of Contents
Instructions Wash tumbler. Apply tape to top (and bottom – optional). Spray paint the tumbler if needed. Let dry. Apply a layer of mod podge with long even strokes. Dump glitter all over while you are turning the tumbler so the mod podge is all covered. Remove tape. Let dry fully (over night). Time to epoxy.
What material do you use for tumblers?
What You’ll Need. Stainless Steel Tumbler: You can use just about any kind of tumbler as your base. I personally prefer skinny tumblers because the fabric lies flat and is much easier to work with! Fabric: Use any fabric you like here!Dec 15, 2019.
What can I use instead of epoxy on tumblers?
Brite Tone – If you want ONE item to use instead of epoxy, this would be it. You want to use Brite tone on every single cup. It is the best quality top coat they have that once it is cured, is shinier and more durable than epoxy!.
What epoxy is safe for tumblers?
1. ENVIROTEX LITE EPOXY RESIN For Tumblers. Envirotex Lite is a brand of epoxy resin you can use for tumblers, whose claim to fame is that it is a pour-on, high gloss finish. It cures to a thick, glossy coating in about 8 hours at 70F, and reaches full cure in about 48 hours.
What do I need to make a glitter Cup?
Supplies for Making Glitter Tumblers with Epoxy Stainless Steel Tumbler (I used a 20oz) Spray Paint. Painters Tape. Mod Podge. Silicone Brushes. Fine Glitter. Clear Coat Spray. Epoxy (Both A and B parts).
Can you epoxy plastic?
It is possible to put epoxy over plastic as long as it is not #5PP. Epoxy will not stick to this specific type of plastic. Plastic was not made to be smothered by a chemical, but it can be done. If you’re looking for a cheaper alternative try using acrylic tumblers.
Can you epoxy fabric?
Yes you can. Epoxy resin will make fabric stiff and rock hard after it cures. Be advised that, like most natural objects, epoxy resin may make fabric look wet and may even cause it to go darker or alter its colour.
Can I seal a tumbler without epoxy?
Make sure to remove the tape before the Mod Podge dries! A way to make a decorated Yeti cup or Ozark tumbler without having to use epoxy. As you can see from the pictures, it’s not as smooth as epoxy but it still works and actually has a nice texture to it!.
Is epoxy and resin the same thing?
The most noticeable difference between these two compounds is their intended use. The Epoxy Coating Resin is intended for coating surface applications, while the Casting Resin is used mainly for jewelry, molds or figurines.
Is UV resin safe for tumblers?
Our Faux Rizzle UV Resin will work well for tumblers as they are scratch resistant, heat resistant up to 500 degrees Fahrenheit of indirect heat, UV resistant, zero VOC (volatile organic compound), and FDA compliant. This means that it is food safe.
How many coats of epoxy do you put on a tumbler?
It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.
How do I make my own glitter?
Instructions Preheat the oven to 350 F. Put a couple drops of food coloring in a bowl and mix in the sea salt, creating as many color combinations as desired. Spread out the colored salt onto a baking dish and bake at 350 F for 10 minutes. Remove and let cool before using.
Why is my epoxy tumbler bumpy?
Surface Imperfections This problem can be caused by anything floating/falling into your resin while it cures, resulting in imperfections in the surface. If you are experiencing imperfections that look more like domed bumps in the resin, skip down to #4.
What causes dimples in epoxy?
Dimples can occur for 3 reasons: temperature fluctuation, micro dust particles and overtorching. To avoid getting dimples in your cured resin, make sure that the temperature in your resin room stays stable, that you use a dustcover and that you only lightly torch your resin!Feb 13, 2019.
Can you put epoxy over pictures?
Covering a glossy photo in a coating of ArtResin is easy – in fact, epoxy resin takes photographs next level, sealing and protecting them with a professional looking finish and a glossy sheen that makes colour pop!Oct 11, 2021.
How do you make a floating glitter Cup?
DIY Floating Glitter Tumbler Make your glitter mix. We mixed a bunch of different colors, shapes and sizes. Unscrew the bottom of the tumbler and remove the papers from inside. Sprinkle or spoon in the glitter mixture. Fill the compartment with water, as full as you’d like. I filled mine up as much as possible.
How long do you wait between epoxy coats on tumblers?
Wait until the epoxy is completely cured (approx. ~ 24 hours). Wash the tumbler with soap and water and it’s ready to use!Jun 14, 2019.
Why is my epoxy not smooth?
The most common cause for uneven epoxy resin is often not using the correct mixing ratio, or even using hardener and resin that is too old. These problems can be prevented by ensuring your work area is well ventilated, not too humid, and using a torch to heat the epoxy and allow the air bubbles to escape.
Can you resin over Modge podge?
To prevent discoloration, seal both sides and edges of the image with Mod Podge® or Elmer’s® Glue-All®. This is especially important if the image is printed on an ink-jet printer. Allow the glue to dry completely before covering the images with resin. Let adhesive dry completely before adding resin.
What material is resin art?
Poured Resin Wall Art Supplies: Opaque pigments, Transparent dyes and/or acrylic paints. Canvas, I found a wooden board as the canvas works best. Stir sticks and disposable measuring cups. Disposable craft brushes.
What is Rexine material?
“Rexine” is a term that’s been around for decades and is currently used primarily outside the United States. Originally, it was a trade name for a specific fabric, but Rexine has generally come to mean a faux leather material. It is a coated fabric, and PVC is usually the coating material.
