Table of Contents
How are CD cases made?
Jewel cases have been the main form of CD packaging because it is designed to protect and secure CDs. So how are jewel cases made? They are made by a process called injection molding. The molten material is injected into a mold that is held under high pressure.
How do you plastic wrap a CD?
If your heating device doesn’t make it easy to simply pull off the excess material, snip around the border of the CD with a pair of scissors. Turn a hairdryer on high. Wave the dryer over each CD is a smooth, back and forth motion. The plastic will shrink around the CD.
What are the dimensions of a CD case?
It is a three-piece plastic case, measuring 142 by 125 by 10 millimetres (5.59 in × 4.92 in × 0.39 in), a volume of 177.5 cubic centimetres (10.83 cu in), which usually contains a compact disc along with the liner notes and a back card.
What are the cardboard CD cases called?
Simply, CD digipaks are a printed card packaging that is often used for CDs and/or DVDs. The digipak, made from cardboard stock, contains an internal plastic holder that is capable of holding one or more discs. Discs are held in place via plastic trays (flexi trays), which are glued into the digipak.
What material is a CD case made of?
These media are made of plastic, but not the same kind of plastic as bottles and food containers. In fact, they are a mixture of different plastic resins. CD cases are polystyrene (#6 plastic), while the discs themselves are polycarbonate (#7 plastic).
What polymer is used for CD cases?
Polycarbonate(PC) is a tough thermoplastic. It is not only highly transparent but also has good toughness which most of the other thermoplastics do not possess. For this reason, it is widely used for making CDs, Safety Goggles, Mixer jar lids etc.
How do you seal a CD case?
IF you can unfold it, then you can reseal it by applying a dab of heat. try using an iron on a lower setting with a piece of wax paper between the seal and the iron (better for your iron and less likely to melt the wrap/case.
How thick is a CD jewel case?
These are premium empty jewel cases – just like CDs come in when you buy them in the store (except for without the tray)! They are the standard 10.4mm (a.k.a. . 43″) thick and will hold most CD trays.
What is the height of a CD case?
The standard CD cover size is 4.75 by 4.75 inches, or 12 cm by 12 cm. This dimension is for the front or back cover of a standard jewel CD case.
What’s the width of a CD in a case?
The standard CD album cover size (front part) is 120 mm x 120 mm (4.7 in × 4.7 in).
Why is it called jewel case?
The jewel case allegedly derives its name from its Phillips designer, Peter Doodson, who named it the jewel case because he claimed it was the perfect case design that also picked up light from certain angles.
What is the DVD case called?
A keep case or poly-box is a type of packaging, most commonly used with DVDs (and sometimes CDs).
What is Snap Case packaging?
A snap case is a type of optical disc packaging, used for DVDs and CDs, also known as a paperback case, Ivy Hill Snapper, “snapper case”, or FLP case. It consists of a paperboard flap (where the cover art is printed) which is held closed by a narrow plastic strip which has a “snap” closure.
Why are CD cases made of polystyrene?
The standard CD (“Jewel” case) cracks easily and, if broken, can scratch the CD. Jewel cases are made of injection moulded polystyrene, chosen because it is transparent, cheap and easy to mould.
Are CD cases acrylic?
From the Wikipedia article on Optical Disc Packaging: The bulk of slimline cases are made with translucent or transparent polystyrene, and are available in multiple colors.
What is a CD Longbox?
A longbox is a form of exterior paperboard packaging for musical compact discs in widespread use in the 1980s and early 1990s in North America.
Are CDs made of polycarbonate?
CD’s consist of 99% clear polycarbonate plastic. The reflective layer, protective layer and screen print comprise the remaining 1% of the disc.
What plastic is used in DVD?
3.1 Polycarbonate (Plastic) Substrate Layer The polycarbonate substrate makes up most of the disc, including the area that is read by the laser (opposite the label side on CDs). It is present on both sides of a DVD, even a “single-sided” disc with a label on one side.
What do you do with empty CD jewel cases?
Reader Question – What Can I Do With All My Empty CD Cases? Storage for pressed leaves and flowers. Make a lamp. Make a mini dry-erase board. CD jewel case calendars using your own images. Group a few of them by glue or rubber band and make book-ends. Give them to your kids to use them as shovels in the sandbox.
What is the proper size to print a CD cover?
Change the image size. For a CD cover, you will want the size to be exactly 4.75 inches by 4.75 inches with 72 dpi resolution. For the back of a CD, change the dimensions to 4.62 inches (width) by 5.87 inches (height).
How do I make a CD booklet?
How to Make a CD Booklet Template Start Word and open a new, blank document. Select the “Insert” tab. Press “Ctrl-End” to go to the bottom of the page. Point to the upper-right corner of the first table and click the double arrow that appears to select the table. Add sample text to the table cells on each page.
How do you shrink wrap a video game?
You rotate the game box 90 degrees and swing the hot arm down to seal the right side of the box. Once the box is sealed, you take the super-charged hair dryer and point it at the plastic-covered game box until the plastic shrinks to a point where it fits snugly. Voila. Shrink wrapped.
How do you wrap a long skinny gift?
For a long, skinny gift like a baseball bat or a stack of wooden blocks, put the gift in a poster shipping tube, then roll a piece of wrapping paper around it with a several inches overhanging at either end. Twist the ends like the piece of candy and tie them with twine or ribbon.
