Table of Contents
STEP 1: Determine your location and remove any large rocks or debris. STEP 2: Place 2x4s on the site and place a level on top. STEP 3: Add or take away soil until the ground is level. STEP 4: Repeat the process until the entire area is flat. STEP 5: Rake any remaining rocks or debris and tamp the ground.
What to put under pool to level it?
The best tool to get the job done is a lawn roller, which you can rent easily from most garden centers. Go over the entire base for your pool, and pack it down flat. Then it’s time to bring out your level.
How do you level the ground for a pool on a slope?
Place stakes or sticks at areas that slope or are off-grade. You’ll need to dig away these area in order to create level ground for the pool. Dig away soil instead of building up low patches. Always dig away slopes and high spots to make them level with lower areas, even if it takes more work.
How level does the ground need to be for a pool?
A pool should be within an inch of being level. At 1 inch, however, the level of the water may be noticeably off. Therefore, it should be between ¼ and ½ inch level in order to be pleasing to the eye.
How do I level my ground for a pool without sand?
Pivot the plank around the pool area and level continually until you are pivoting 360 degrees without stopping. Next, you can spread a layer of crushed limestone over the pool area and seal it by wetting, tamping, and leveling it with your base. Now you can add your soil and limestone until it is flush.
Can you partially bury an above ground pool?
The walls of an above ground pool typically consist of a thin aluminum wall that holds the pool liner. You will generally find above ground pool retailers willing to partially bury an above ground pool, but you can expect to leave at least half of the pool out of the ground.
Should I put pavers under pool legs?
It is best to put a 1ft-by-1ft concrete block paver under each leg of your above ground pool. These blocks can take the pressure and they don’t get mold, insects, or other forms of deterioration issues. By properly supporting the pool legs, you won’t damage the legs over time and have to dig them out to remove later.
How many bags of sand do I need for a 15 foot pool?
How Much Sand Will I Need For Pool Installation? Amount for Sand Base with SAND COVE Amount for Sand Base with FOAM COVE 12′ Round 1.00 0.75 15′ Round 1.50 1.00 18′ Round 2.00 1.50 21′ Round 2.50 2.00.
How many inches can an above ground pool be unlevel?
Any more than two inches is unacceptable. Intex pools that are three inches off or more will not last and no one should be swimming in one. Not only does it look very bad, once the uneven wall starts to create the outward pressure one side it will eventually push the pool out of shape more and more.
Can you put a pool in a sloped yard?
The short answer is yes. By working with professional pool builders and landscapers, you can pursue pool installation even when you’re dealing with a slope. You can use the retaining walls to ensure runoff won’t end up in the pool or even create water features or ledges for sitting and entertaining.
How do you prepare the ground for an Intex pool?
The Right Way: Mark the perimeter of your pool, and add 1 foot of extra space to all sides. Use a line level to measure at 12-36 points around the pool. Then use flat shovels or a sod cutter machine to remove turf and lower the high spots. Add a one inch layer of sand.
What happens if your pool isnt level?
The water will press with more force on one section of the pool than the others. This uneven weight distribution can buckle, twist or even collapse the pool wall, resulting in property damage and injury to anyone in or around the pool when it fails.
What tool do you use to level dirt?
A flat-edged spade performs the same task, but makes a straighter cut around the edge of the area that you are leveling. Once the soil is loose and workable, the tined side of a bow rake clears the area of small rocks and debris, while you can use the flat side to smooth the surface.
What tools do I need to level my yard?
Yard Leveling Tools & Equipment Lawn Mower. Sand. Topsoil. Compost. Hand rake. Thatch rake [or dethatching machine] Plastic leaf rake. Large push broom.
What is a good base for an above ground pool?
Concrete pads are excellent to use as a base for your above ground pool, but you’ll want to add another cushion between the two. Concrete is an abrasive material and will wear on the liner if it’s in direct contact. Concrete is the best choice for a solid base because it is perfectly flat.
How do you level a large area of ground?
Tamp the soil. If you are leveling a small area, you can tamp the soil using your foot and the bottom of your rake. If you are leveling a large area, or it is especially important to keep the ground level (such as if you are building a structure), get a tamper or plate compactor to compact the soil.
