Table of Contents
10 Tips and Tricks to a Fast and Cool-Looking Pinewood Derby Car Bake your block. Max out your weight at the regulation 5 ounces. Use all of the graphite (dry lubricant is usually allowed). Sand and polish your wheels and axles. Check alignment. Spend time on sanding. Use a high-quality paint. Add decals!.
What is the fastest shape for a pinewood derby car?
But aerodynamics rule the day, and the best shape is a simple wedge. Just like a spoiler on the rear of a sports car, the wedge shape allows as much air to flow over the top of the car without hinderance while keeping the car pinned to the track.
What is the fastest pinewood derby car time?
We used ultralight wheels and grooved axles. It was very fast. Nobody even came close to us. Our best time was 2.516 seconds on a 35 foot aluminum track.
How fast do pinewood derby cars go?
The Speed of Pinewood Derby Cars The distribution plot below shows a range of speeds from 177 mph to 229 mph, with most cars exceeding 200 mph.
What is the best weight for a Pinewood Derby car?
First, the basics: Your car should weigh as much as it’s allowed. In most races, a Pinewood Derby car’s weight is limited to 5 ounces. If your car weighs less than that, add coins or other weights. As far as where you should attach those weights to your car … well, let’s just say opinions differ.
Should I bake my Pinewood Derby block?
Should I bake the pinewood derby block? The short answer is no, do not bake the block. The idea behind baking the block is to remove moisture which will make the block lighter. Baking might remove more moisture but the block will quickly re-absorb the moisture after it is out of the oven and cooled down.
Where should the weight be on a Pinewood Derby car?
Best Location to Weight Your Pinewood Derby Car When deciding on where to weight your car, you should try to reach a final balance point of the car 1 inch or less in front of the rear axle. To achieve this, place 2/5 of the added weight behind the rear axle, and the remaining 3/5 in front of the rear axle.
What is the best paint for a Pinewood Derby car?
ByBrittney. Pinewood Derby cars were painted over 100 times, and we selected the best paints for them. Sand and paint are the best way to apply these high gloss acrylic paints – they do not require primer or wood sealer. Water is the base of all of our paints.
Why does my Pinewood Derby car wobble?
Pinewood Derby Wheels Wobble are a very common issue. Derby wheels are made with an injection molding process. Because they are not machined from raw material, flaws such as concentricity (wobble) will cause a wheel to wobble because the bore is not aligned with the outer diameter. No wheel mold is safe from flaws.
Do heavier pinewood derby cars go faster?
Much has been written about the physics of pinewood derby cars, and this is one rare case in racing where heavy = fast. Aerodynamics have little effect in such a short race, but weight does and putting the weight at the back of the car will make your car faster on the flat of the track.
What shape makes a car go faster?
The shape of the chasis is similar to an upside down airfoil. The air moving under the car moves faster than that above it, creating downforce or negative lift on the car. Airfoils or wings are also used in the front and rear of the car in an effort to generate more downforce.
How do you make a gravity car go faster?
If you want to go fast, the car needs minimal air resistance. As crazy as it sounds, a simple wedge shape car solves this problem. Don’t forget to slant the back of the car so it doesn’t drag when the car hits the bottom of the hill. Wheels – The wheels provided in the standard kit are excellent.
How much weight does paint add to pinewood derby car?
Paint only adds a few grams (hundredths of a ounce). We generally weight up to 4.9 oz and then do the last weight adjustment at check-in.
Can I add weight to my pinewood derby car?
The heavier your pinewood derby car, the faster it will go. Most race rules limit the weight to 5 oz so you want your car as close to the limit as possible. The Wedge block will need about 2.5 oz of additional weight to bring it up to the 5 oz limit. Then add the weights until the total is 5 oz.
Do you glue Pinewood Derby axles?
7. Create Glue Holes: Glue the axles firmly in their holes to ensure that they stay perfectly placed, but make sure you don’t get glue on your wheels. 8. Add Weight: Remember to make your Pinewood Derby car as heavy as the rules allow.
Do aerodynamics matter in Pinewood Derby?
A more aerodynamic car (but very similar for other things) doesn’t give you much bang for your buck. Friction will get you. If you can reduce the coefficient of friction by just a little bit, it will make a noticeable difference. If you let your kids do most of the work, they will gain more than a win.
How thin can a Pinewood Derby car be?
You can easily run a car that is 1/4″ in the rear and tapers to 1/16 in the front as long as it is full width.
Where is the center of gravity on a pinewood derby car?
Center of gravity placement should be between 1⁄2″ – 1″ in front of the rear axle. This is true for all wheel base types. Whether you are using a standard wheelbase or an extended wheelbase.
Where do you bend pinewood derby axles?
We recommend installing axles with a 1.5° bend for the front of the car and 2.5° bend for the rear. The axles heads are marked in the direction of the bend. Install the axles with the mark straight up.
