How To Make Envelope Pillow

How much fabric do you need for an envelope pillow?

How much fabric do I need to make envelope pillow covers? 16″ x 16″ – cut 17″ x 38″ – 1/2 yard of fabric. 18″ x 18″ – cut 19″ x 42″ – 2/3 yards of fabric. 20″ x 20″ – cut 21″ x 46″ -3/4 yards of fabric.

How much should an envelope pillow overlap?

Basic Instructions: The ends will overlap approximately 3″ at the back when finished. This extra fabric is to ensure that the pillow form will be hidden when the pillow cover is in place. To calculate the fabric measurement you will need measure your pillow insert.

How much fabric do I need for a 20×20 envelope pillow?

You will need 3 pieces of fabric for these pillow covers. Start by measuring your pillow to determine what sizes of fabric you’ll need. First panel: Add 1 in to the width and height of your pillow measurement. For example, if your pillow is 20×20, you will cut a piece of fabric 21×21.

How much should the back of a pillow sham overlap?

The two hemmed edges should overlap about 8-10″, and all the other raw edges should line up with the pillow front panel. Next, pin all the way around the pillow sham. (TIP: be sure to pin all the layers together where the two back panels overlap to ensure you catch the inside panel in your stitching!)May 3, 2016.

What is envelope style pillowcase?

What are Envelope Closure Pillowcases? Traditional pillowcases are open on the ends. An envelope pillowcase has a special envelope closure at the end of the case, so the pillow is tucked in and out of sight for a more finished look when making up the bed. Recently, these cases have picked up in popularity.

How do you make an envelope pillow case for a bed?

METHOD: Step 1: Measure your pillow. Common bed sized pillows are the following sizes: Step 2: Measure and cut out your pillowcase pieces. Step 3: Finish both ends of your pillowcase. Step 4: Sew 3 sides of your envelope pillowcase together. Step 5: Sew down the flap. Step 6: Finish the edges.

How much material do I need to cover a 16×16 pillow?

Sizing Up Fabric Needs for Pillow Covers Dimensions (Length by Width) Amount of Fabric Needed for 1 Pillow Cover (Using 54-inch Wide Fabric with No Pattern Matching) 14 x 14 inches 1/2 yard 16 x 16 inches 1/2 yard 18 x 18 inches 5/8 yard 20 x 20 inches 3/4 yard.

What size pillow goes in a 16×16 cover?

We recommend an 18″ x 18″ insert for our 16″ x 16″ inch throw pillow covers to get a plump pillow.

How big do I cut fabric for a 16 pillow?

If you are using a square pillow, here are some quick measurements for you to cut your fabric: 16″ pillow: Cut the fabric 16″ x 36″; 17″ pillow: Cut the fabric 17″ x 38″; 18″ pillow: Cut the fabric 18″ x 40″.

How do you measure fabric for a pillow?

Measure the width of a pillow cover as from side seam to side seam, and the length as from the top seam to the bottom seam. Typically the bottom seam houses the zipper or hook-and-loop closure. Add seam allowances and cut the pillow fabric to the new measurements.

How do you make a Velcro pillow cover close?

Measure and cut fabric. Sew fabric edges to prevent fraying. Sew fabric pieces together. Turn the pocket right-side-out and you will have a pocket with a flap that comes down over the opening. Add Velcro. Insert your pillow and affix the flap with the Velcro.

How do you make a pillowcase without a cuff?

How to Make a Pillowcase Cutting your fabric. Start by cutting two identical size pieces of fabric, that are each 29.5 inches long and 21 inches wide. Fold fabric, iron, pin, and sew. Repeat step 2 with the second piece of fabric. Pin the pieces together and sew. Flip the pillowcase right side out and it’s ready to use.

What are the different types of pillow cases?

Different Types of Pillowcases Designs Housewife. The housewife is the most popular type of pillowcase. Oxford. Oxford pillowcases are a little fancier than the housewife style. Bag. Cotton Pillowcases. Polyester Pillowcases. Silk Pillowcases. Flannel Pillowcases.

What is an envelope sham?

Each sham features an envelope closure, making it easy to slip on and off inserts (not included) and hide the seam from view. For easy care, use a cold, gentle cycle and tumble dry on low. Iron if needed.

What do you call pillowcases that open in the middle?

A sham is a decorative pillow case that transforms normal sized pillow fills into useful accessories for one’s bedding set. Unlike the typical pillowcase, the pillow sham is often open in the middle of the back, with slightly overlapped fabric (or sometimes is closed with a hidden zipper).

How do you make cushion covers step by step?

Step 1 | Cut The Fabric. Decide what pattern you want to have on the front. Step 2 | Insert The Zipper. Hint #1: Make sure that your zipper is at least as long as the width of the cushion form. Step 3 | Add Piping Or Trim. Step 4 | Sew The Cushion. Step 5 | Finish The Cushion.

How much fabric do I need for a no sew pillow?

To make your no-sew pillow covers, start by cutting the following from your fabric: 1 – 20×20 square for a front panel and 2 – 13×20 rectangles for left and right panels.

How much fabric do I need for a pillow case?

A finished standard pillowcase should measure about 22.5 inches by 31.5 inches, allowing for fill depth, seaming and an approximate 4-inch hem. One yard of 45-inch-wide fabric should be enough to make one standard case, if the material is preshrunk.

How much fabric do I need for a 12×12 pillow?

For example, a 12-inch pillow requires two 14-inch squares — front and back. You can mix and match materials, too. If needed, selvages – the fabric edge — can be cut down to a half-inch. A half-yard (18 inches) of 60-inch wide fabric is enough for two complete pillows up to 13 inches wide.