Table of Contents
Step 1: Create Design. To create my design, I used CorelDraw x3. Step 2: Print Design and Cut. I then laser printed my design on the wood, I used a saw to cut it out. Step 3: Drill Holes. Step 4: Add Axels. Step 5: Use Washers. Step 6: Add Wheels. Step 7: Add CO2 Cartridge, and GO! Step 8: Ask Questions!.
How do you start a CO2 car?
In the launcher, a homemade firing mechanism made from a trim nail, two bolts, two springs and a 1 1/2″ wide x 3/8″ thick short strip of hardwood. Simply hit the hardwood strip in the center with a hammer and the pin will pierce the Co2 canister, releasing the gas and sending your rocket car on its way.
What are CO2 cars made of?
CO2 dragsters are made of lightweight material usually balsawood or basswood. They are propelled down a track by compressed carbon dioxide gas. The CO2 cartridge is punctured so the compressed gas can rapidly leave the canister causing the dragster to move.
What tools are needed to make a CO2 dragster?
The kit includes everything you require to craft 50 Balsa Wood CO2 Dragsters including the CO2 cartridges and student workbooks plus an array of teaching resources and 4 Dragster paint stands. Assembly requires a drill, coping saw, wood file or rasp, ruler, scissors, finish, and a race system (not included).
How do CO2 cars work?
CO2 cars are propelled by carbon dioxide rapidly escaping from a small container called a cartridge. The cartridge is positioned in the car so that the escaping gas moves in a rearward direction. The rearward force of the escaping gas is the initial action described by Newton.
What is the fastest CO2 car in the world?
The recent Braden River High graduate built the fastest CO2 dragster in the nation, racing his way to a first-place finish in the Technology Student Association’s national dragster competition and setting a national record of . 925 seconds on a 65-foot track.
What is a shell CO2 car?
Shell Cars – the wheels hidden. inside the body. EXAMPLES OF DRAGSTER SHAPES AND STYLES. Rail Cars – the wheels outside the body. Shell Reveal – the wheels inside.
How can I make my CO2 car better?
You can help reduce it by making sure the axles are free to rotate, and that the wheels and tires are not rubbing on the car body. Drag: Here’s where aerodynamics come into play. As an object moves through the air, it is met with air resistance as speeds increase.
What makes a fast CO2 car?
Aerodynamics, thrust-to-weight ratio, surface drag, rolling resistance and friction–all play a role in what makes a CO2 car fast or slow.
What happens when you puncture a CO2 canister?
You will have to re-inflate your tyre with normal air, which includes larger molecule that leak out slower. If you don’t use all the CO2 gas in the cartridge, it will leak out over the next ~30 minutes approximately.
What is the best shape for a CO2 car?
Sphere – A very good aerodynamic shape because of it symmetrical shape. Which allows air to flow over it’s surface with very little disruption to the air stream.
How fast do c02 cars go?
They’re super quick, on a (20-metre) track, the cars can cross the finish line in just over a second, travelling at a top speed of around 90 kilometers per hour. The CO2 dragster may be small, but it’s going to be moving at incredible speeds when you race it.
What’s the most aerodynamic car?
The electric Mercedes EQS is the world’s most aerodynamic production car. Its 0.20 drag coefficient beats the Tesla Model S and Lucid Air. The cab-forward design isn’t just for good looks.
How do you dispose of CO2 cartridges?
The cartridges are 100% steel (except for the seal), so are eminently recyclable. Just put them in your recycling bin.
How much does it cost to build a dragster?
They weigh about 1000 kg which makes for a massive power to weight ratio. The total finished cost of a Top Fuel dragster is estimated at $500,000.
What is a drill press used for when making our race cars?
Axle holes should be drilled perpendicular to the car’s longitudinal axis in order for the car to roll freely and straight down the track. A drill press is highly recommended because it makes drilling perpendicular holes a cinch. 1.
Is there a supersonic car?
The Bloodhound supersonic car that was built to break the land speed record is up for sale. Bloodhound became one of the fastest cars in history during trials in the Kalahari desert in 2019. But it needs the addition of a rocket motor to break the all-time record speed of 763mph (1,228km/h).
How are CO2 dragsters tested?
In a race, a laser scanner records the speed of the car at the end of its run. Often, the dragster is carved out of balsa wood because of its light weight and cheapness. The projects mainly test the aerodynamic, mass and friction properties of a car.
Why do drag racers use CO2?
CO2 puts the pressure on the wastegate to hold the valve closed as soon as or before it is actually needed. It reduces SO MUCH time when trying to build boost or spool a turbo engine. This saves not only time but puts less stress and reduces temperature to your torque converter and transmission!Aug 23, 2020.
What points of a CO2 car will create friction?
On a CO2 car, friction occurs primarily in three places: between the wheels and the ground, between the axles and the car body, and between the eye-hook and the fish line track.
How fast does a dragster go?
Among the fastest-accelerating machines in the world, 11,000-horsepower Top Fuel dragsters are often referred to as the “kings of the sport,” and with good reason. They are capable of covering the dragstrip in less than 3.7 seconds at more than 330 mph.
How do you reduce drag on a car?
Adjust the front fascia and air dam to reduce drag under the vehicle. Add side skirts. Tune the deck height, length and edge radius.You can reduce your vehicle’s aerodynamics by: Lifting it — “an inch of increased ride height degrades the coefficient of drag by about 10 drag counts [. Adding wider tires.
How do you determine the speed of the CO2 dragster?
Using a Pitsco launch and timing system, test the dragster using an 8-gram CO2 cartridge and time it for a 20-meter distance. The average velocity is calculated using the formula velocity equals distance (meters) divided by time (seconds), or v = d/t.
