Table of Contents
Put the shine back in your porcelain sinks and bathtubs by giving them a good scrubbing with full-strength white vinegar, followed by a rinse of clean cold water. To remove hard-water stains from your tub, pour in 3 cups white vinegar under running hot tap water.
How do I get my dull bathtub to shine again?
Mix 1/4 cup white vinegar with 1 tablespoon of baking soda in about a liter of hot water and use this on terry cloth to wash out your tub. You can add some essential oils for a boost of fragrance too.
How do I restore the shine to my enamel bath?
Soak a non-abrasive sponge in the baking soda/ammonia solution and scrub the surface of your porcelain bathtub or sink, paying particular attention to stained areas. Dip the sponge in the solution, scrub and repeat until you’re satisfied. Rinse well.
How do I make my acrylic tub shine?
How to Make Tubs Shiny Again Squirt 1/4 tsp. Drench a cleaning rag with the dishwashing solution. Continue wiping the tub’s surface with the solution until all buildup and stains are gone. Saturate another rag with water. Buff the tub’s surface with a soft towel. Inspect the tub for shine.
How do you clean a dull bathtub?
Mix water and vinegar in a spray bottle. Follow a 2:1 water-to-vinegar ratio for fiberglass and a 1:1 water-to-vinegar ratio for porcelain tubs. Add a teaspoon of lemon juice for scent and an extra cleaning boost. Spray the entire tub with the solution and allow it to sit on the surface for 15 to 20 minutes.
How do I make my bathtub sparkle?
Here are eight tips on how to make your bathtub sparkle: 1) Prevent soap scum and mildew from forming. 2) Experiment with DIY cleaners. 3) Scrub properly. 4) Pick the right tools. 5) Buy a showerhead filter. 6) Properly ventilate your bathroom. 7) Unclog your drain regularly.
How do you polish a bathtub?
Reader’s Digest recommends mixing two parts baking soda to one part hydrogen peroxide to form a thick paste. Apply this paste in a targeted manner to any stains remaining in your tub. Allow the mixture to dry out fully, which should take around 30 minutes; then rinse with warm water.
Can you polish an old bathtub?
You can polish scratches to remove the dirt and restore the look of the bathtub, but you must use the right cleaners and work carefully so you don’t create new scratches.
How do I make my fiberglass tub dull shine?
Sprinkle baking soda onto the tub’s surfaces and use the wet sponge to scrub it in gently. The combination of the vinegar’s cleaning and disinfecting properties, along with the mild abrasiveness of the baking soda, will clean your tub thoroughly and bring it back to a shine.
How do you clean a badly stained bathtub?
Combine 2 parts vinegar and 1 part water in a spray bottle and spray the entire bathtub. Allow this soaking solution to sit in the tub for 15-20 minutes. For tough stains: place a towel soaked in a vinegar and baking soda paste or hydrogen peroxide onto the stain(s) and allow the towel to sit for up to 1-hour.
Does vinegar damage porcelain tubs?
When cleaning a porcelain bathtub, avoid using abrasive cleaners as they can chip the surface of the bathtub. Also stay away from scouring powder, white vinegar, and steel wool as they can damage the finish of the bathtub.
What cleans a bathtub the best?
Sprinkle baking soda on all tub surfaces. For extra-dirty tubs, use tub-and-tile cleaner instead. Fill your bucket with a half-gallon of hot water and two tablespoons of dish soap. Dip a scrub sponge or a stiff nylon brush into the bucket, and scrub all bathtub surfaces.
What is the best product to clean bathtub?
Here are the best bathtub cleaners of 2021 Best bathtub cleaner overall: Mr. Best bathtub cleaner for hard water and rust stains: CLR Pro Calcium, Lime, and Rust Remover, $5.87 from The Home Depot. Best bathtub cleaner for mold and mildew: Clorox Plus Tilex Mold and Mildew Remover, $4.36 from The Home Depot.
How do I make my bathtub sparkling white?
To keep a white fiberglass tub looking brand new, use a regular baking soda scrub: Sprinkle baking soda on stains. Spray with warm water. Leave 10-20 minutes. Scrub with Mr. Clean Magic Eraser or soft sponge. Rinse. Dry with a soft microfiber cloth.
How do you shine dull porcelain?
Baby oil or lemon oil also works to restore the shine of your porcelain. When using either oil, apply a few drops onto a clean rag and wipe down the entire sink. The oil restores shine and helps protect against future stains as it forms a protective barrier on your sink, making it harder for things to stick to it.
Can a porcelain bathtub be polished?
Keep a porcelain tub shiny with regular polishing. The look of a porcelain tub can quickly go from vintage chic to old and shabby if the tub is not properly maintained and polished. With the right cleaning products and a little elbow grease, you can get your porcelain tub looking perfectly bright and shiny.
How do you clean a discolored fiberglass tub?
If your shower room has a fiberglass tub that has yellowed, a DIY cleaning solution of hydrogen peroxide and water will work wonders for you. Start by pouring the peroxide into your tub. Next, scrub the walls of the tub until they are clean. Finally, wash the tub by pouring water over it.
How do I get my yellow tub white again?
Hydrogen Peroxide: fill a spray bottle with 3-percent hydrogen peroxide. Let the solution sit for 10-15 minutes and then wipe the tub down with a damp sponge. You can repeat these steps until the yellow staining disappears.
Can bleach damage a bathtub?
Back to the question, “can bleach damage a bathtub?” Yes, it can. Bleach can add stains to your bathtub is misused. Remember, it is a massive chemical that, if not used correctly, can cause more harm than good.
