Table of Contents
How do you make silver out of clay?
File and carve the clay once dry then sand for a nearly perfect finish before firing. During the firing process, the harmless binder burns away and the silver particles sinter (fuse) to form a solid 99.9% pure silver piece. Metal clay can be safely fired using a butane torch, gas stove or kiln.
What is Art Clay Silver?
Art Clay Silver is a precious metal clay made in Japan. It is easy for everyone from children to the elderly people to make a beautiful silver jewellery work . The process is so simple, it can be molded like a water-based clay. Just after 5 minutes firing, the clay become 99.9% silver.
Is precious metal clay real silver?
Precious Metal Clay (PMC) As a solid-phase sintered product of a precious metal powder used to form a precious metal article, the material consists of microscopic particles of pure silver or fine gold and a water-soluble, non-toxic, organic binder that burns off during firing.
Can you do silver clay at home?
Silver clay is a lovely new material which is fully mouldable, just like clay. You can shape it free-hand, or use moulds and tools to texture and shape it, and then fire it into fine silver (99.9% pure silver). Firing is by specialist kiln or there are alternative firing techniques you can do yourself at home.
Do you need a kiln for silver clay?
Art Clay Silver 950 must be fired in a Kiln. (It is not suitable for Torch or Gas Hob Firing).
How do you use silver art clay?
SO, HOW DOES SILVER CLAY WORK? Step 1- Roll out the clay. Keep the clay 1mm thick by rolling it out in between spacers or playing cards. Step 2 – Create the shape. Shape and refine your design, using a cookie cutter. Step 2 – Create the shape. Step 3 – Fire and polish. Step 3 – Fire and polish.
What is the difference between art clay silver and PMC?
Yes, all three versions yield the same metal, 100% silver. The difference is not in the ingredients but in the shape of the particles. Original PMC is made with flake‑like particles that allow room for the binder, which gives the material its workability. PMC+ is made with a particle with more neatly defined edges.
What is the best silver clay?
Sterling silver clay is the strongest silver clay on the market because of the additional copper content.
What is Art Clay made of?
Art Clay is an Art Medium consisting of very small particles of metal such as silver, gold or copper. Mixed with an organic binder and water for use in making jewelry, beads and small sculptures. After drying, the clay can be fired in a kiln or by using a hand held gas torch.
Is there gold metal clay?
Gold Clay Products. There are several options for adding the allure of gold to your metal clay and jewelry projects. Each has specific working properties and advantages. The PMC brand offers a 22K gold clay and a 22K gold paint.
Can you solder metal clay?
Soldering. Precious Metal Clay or Art Clay is metallurgically just like other metals but structurally a little more porous. It can be joined by using the same flux, solder and torches as silver and gold, but because of its porosity, Precious Metal Clay or Art Clay will “soak up” solder.
Can you fire silver clay with a torch?
Torch firing is a great, inexpensive, way to fire your metal clay. You can use a small butane gas torch, like a kitchen torch, to fire all the Art Clay Silver clays.
How do you use metal clay without a kiln?
Using A Gas Torch Place your work on a soldering block on a fireproof surface. Light the torch & hold the flame about 2cm away from your work (depending on the size of your piece and heat of the flame). Within a minute the piece will be enveloped in a soft flame as the binder burns away.
Can you fire silver clay in the oven?
Precious Metal Clay or Art Clay can be fired in any furnace that will sustain the required temperature with reasonable stability. Almost any kiln with a pyrometer, like those used for burnout or enameling, will work.
Can you Colour silver clay?
You can add beautiful enamel to your silver metal clay with a simple butane torch. If you already torch fire your metal clay, you’ll find working with colourful enamels very easy. Beautiful colours can be added to your metal clay work using a patina solution like Liver of Sulphur.
What temp does silver clay fire at?
Anything that is made of fine silver can be fired at 1650°F / 899°C for 2 hours. Remember, most silver clay is made of fine silver, so anything that applies to silver clay also applies to fine silver findings, wire, etc. Sterling silver findings can be co-fired with silver clay.
Can you harden clay with a torch?
Firing with a Blow Torch Ensure the Art Clay Silver clay is completely dry before firing (allow at least 24 hours). The clay will shrink as it is fired. Angle the blow torch at a 45° angle and direct the flame at the clay, keeping a distance of about 6-7cm.
Can you mix PMC3 with PMC Flex?
PMC3 can be used for mixed media jewellery; it can be combined with dichroic glass, synthetic gemstones, some natural gemstones and ceramics. You can also combine PMC3 with PMC Flex. PMC3 can be torch, as well as, kiln fired.
How is metal clay made?
Sintering is the process of making a powdered material (in this case, metal clay) coalesce into a solid mass by heating it to a very high temperature, just below the point of liquefaction. There are several types of metal clay available: fine silver, silver alloy, gold, gold alloy, copper, bronze and steel.
Is gold clay real gold?
Art Clay water-based gold clay, sometimes called metal clay or precious metal clay, is made by Aida Chemical Industries in Japan: it’s a composite clay-like material, made of 95% 22K gold and 5% water-based binder. This gold can be hallmarked as 22 karat gold, once fired it is 91.7% gold and 8.3% silver.
What is PMC3?
PMC3 is arguably the most multi-purpose version of Precious Metal Clay available. It has a low shrinkage rate (approximately 10%), which means you get a substantial metal content once fired. PMC3 is a fine silver clay, meaning that it is 99% pure and can be hallmarked as 999, Fine Silver once fired.
