Table of Contents
Is it cheaper to build your own shelves?
The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time. Durability – As long as you choose quality materials and a solid design, your DIY shelves will be more durable.
What wood is used for shelves?
If you are making shelves where the color and grain of the wood is an important part of the design, look for oak, maple, or cherry plywood—these options will still offer durability, but will help keep costs down compared to with non-manufactured hardwoods of the same species.
How thick should Wood be for shelves?
Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.
How thick should plywood be for shelves?
The most common size used in shelving is a 3/4 inch thickness. Cabinetry, furniture, and smaller decorative projects might generally use a combination of 1/2 and 3/4 and occasionally 1/4 inch.
Is plywood good for shelves?
Plywood is the industry standard for shelving, so it’s a good choice for bookshelves. However, there are a number of sturdy woods with which you can construct bookshelves.
What is the strongest wood for shelves?
Koa. If you want wood shelves that last for a long time, you should consider using Koa wood. This is considered to be the hardest among commercially available wood types. Even so, Koa is lightweight and has beautiful shellac qualities.
How much weight can a 2×4 shelf hold?
A 2×4 can hold up to 40 pounds or 300 pounds when laying on its edge without sagging when laying horizontally. Several factors can lower or increase a 2x4s strength, including wood species, lumber grade, and moisture content.
How do you install a 2×4 wall?
You can locate the studs with a magnetic stud finder (nails), and nail the 2X4s to them with finishing nails sunken with a nail punch and hidden with wood putty, or drill thorugh the 2X4s, screw them to the studs, and plug the screw holes with wooden dowel plugs, and sand, paint or stain to suit.
How do you support a shelf with wood?
By far the easiest way to support a long wooden shelf is by using gussets. You can buy these anywhere, and odds are you already have at least two of them under your shelf right now. Adding more of these creates more support, it makes your shelf more safe. Gussets are also called brackets.
How long can a shelf be before it sags?
The eye will notice a deflection of 1/32 inch per running foot so that a fully loaded (70-80 pounds) bookshelf that is 3 feet wide, should sag no more than 3/32 inches. For most shelves made from 3/4 inch stock, a practical span is 30 to 36 inches.
How do you keep wooden shelves from warping?
By following these simple instructions, you can prevent your wood from warping: Do not allow lumber that is drying to dry too slowly, which could allow moisture to stay long enough to cause warping. Keep drying lumber from being exposed to moisture or humidity. Do not cause cracks by over-drying wood.
How much weight can a plywood shelf hold?
Strength Comparison: The amount of weight a 3-foot 1×12 shelf can hold without sagging more than ¼ inch: Oak: 313 lb. Pine: 200 lb. Plywood: 129 lb.
Is 1/2 inch plywood strong enough for shelves?
For everything else, like casework, shelves, slab doors, drawer fronts, and raised panels (done with edging with solid wood). In using 1/2″ for cabinet construction, it has the propensity to warp, and doesn’t lend itself to hold screws very well (because of the thickness).
Is 12mm plywood OK for shelves?
It is generally unsuitable for shelving as the finish is poor. Use 12mm chipboard as a minimum and support the shelf at no greater than 300mm centres for all but the lightest of loads. Or 18mm chipboard with supports no greater than 700mm apart.
What’s the thinnest plywood you can buy?
The thinnest plywood on the market ranges all the way down to 2mm thick (just over 1/16 inch). These are obviously specialty plywood products, manufactured for special applications which can’t be accomplished by any other product on the market, whether plywood or some other material.
Can softwood be used for shelves?
Softwood (or hardwood) edge moulding of a width to suit the shelving thickness, can easily be cut with corner mitres, and then glued and pined to the edges to hide the cut edges of the shelving.
Is MDF OK for shelving?
MDF is commonly used for shelving in closets and cabinets because it’s inexpensive and smooth. But MDF isn’t as stiff as plywood and will sag over time. The MDF edge will absorb a lot of glue, so spread on a light coat, give it a minute to soak in, and apply another bead before you add the wood nosing.
How deep should built in shelves be?
Most shelves are built a minimum of 11 to 12 inches deep, but this is your chance to customize: Go for it!.
Is Pine Good for shelving?
For short length bookshelves, pine is a good material to work with. If you’re planning on building bookshelves in an alcove or with intermediate support, its strength comes into its own in plank form. Varnishing is recommended.
How wide should Shelves be?
The lowest shelf should be 3 to 4 inches from the floor level. Shelf width or span is determined both by aesthetics and sag considerations. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.