Table of Contents
How wide should a scarf valance be?
For example, if you want the window scarf to hang down 30 in (76 cm) on each side, and the window is 60 in (150 cm) wide, then you should buy 180 in (460 cm) of fabric. 22 in (56 cm) is a good width for a curtain scarf, but it is completely up to you and the look you are going for.
How do you measure for a scarf valance?
Measure the width of each window, plus the amount the scarf is to extend onto the wall.
How do you wrap a scarf around a window?
Wrap the scarf over the curtain rod several times on each side of the clip. For a narrow window, wrap the scarf two to four times. For a larger window, wrap the scarf eight to ten times.
How long should a window scarf be?
Although the length of the scarf depends on the finished look desired and the size of the window, as a general rule the ends should hang down at least two-thirds of the length of the window, while still allowing for a nice swag over the top of the glass.
How do you keep a scarf valance from slipping?
Keep the swag from slipping by attaching the underside of the valance to the top of the rod with two-sided tape.
How wide is a window scarf?
A standard window scarf is 50 inches wide by 216 inches long. Take into account the length to which you would like your scarves to hang over your curtains or windows.
How do you measure for a window scarf?
Measure across the top of the window with a tape measure. Measure down one side of the window to the approximate point where you want the bottom of the scarf to hang and double this measurement. Add the measurements together and add 1 1/2 inches to the total. This is the scarf’s length measurement.
How do you measure for swag curtains?
Starting from the top of the pole on the left-hand side, take your flexible measuring tape and re-create the arc of the swag over to the top right-hand side of the pole. This is your swag measurement. You need to measure the lowest part of the draped swag in order to get the appropriate amount of fabric.
How do you make a rosette with a window scarf?
Insert the scarf through the scarf holder from behind (nearest the window frame) and poke the scarf out through the center of the holder. Pull the scarf out gently from the front of the holder to make small folds in the scarf that will resemble a rosette. Adjust the fabric rosette until you like how it looks.
How do you fold a scarf into a curtain?
Begin folding the scarf in accordion-style pleats, keeping the fabric in sync with your folding partner’s end. Keep the material taut between you as you fold. Fold your pleats about 3- to 4-inches wide, depending upon the size of your window and scarf. Fold the scarf in this manner until you reach the end.
How do you hang a swag valance?
Start by hanging one end of the swag over one end of the rod. Then, hang the other end of the swag over the other end of the rod. Let the fabric in the middle drape down. When you’re finished, the draped fabric in the center should look like a regular curtain swag.
How do you hang a scarf valance on a bay window?
Start by draping one end over the rod from behind; wrap the scarf valance around the rod three or four times, with the ends hanging down on the outside of the two side windows. For each wrap, pull the material down for a swag look; the swags hang alternately over and under the rod.
How much of a window should a valance cover?
For most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.
What is a scarf valance?
Scarf valances are a quick and cost effective way to add a pop of color or a new decorative style to a window. They loop and drape over a decorative rod, jazzing up some plain mini-blinds and providing a touch of elegance to your windows.
How do you hang a scarf on the wall?
Select a spot on the wall to hang the scarf. Simply hammer a nail into that spot, then drape the ribbon over the nail. The scarf hangs flat, so its design is always visible. The dowels can also hang from curtain rods or other spots.
How do you hang swag curtains with knots in corners?
Adjust the swags and the curtain to ensure that both hanging sides are equal and the swags are how you want them. Carefully grasp one side of the curtain where it meets the end of the drapery rod. Fold it in half to make a loop and pull the hanging side through the loop to create a loose knot.
How long should a swag curtain be?
The standard drop lengths of swags are 16″, 18″ or 20″. Usually 6 or 7 folds are placed across the top of a traditional swag with a standard drop. Swags that have shallow drops of 12″ will have 3 or 4 folds.
How do you measure fabric for swag?
Divide the finished width by the width of the fabric. For example, if you need 90 inches and have fabric that is 48 inches wide, then your equation would be 90 / 48 = 1.875 yards. To be safe, round the number up to two yards.
How long should a swag valance be?
The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining. Place the fabric and lining right sides together.
How do you hang a swag curtain without a rod?
How to Hang Your Curtains Without Using a Rod 1 – Hooks. There are a number of hooks you can use to hang your curtains. 2 – Drawer Pulls. 3 – Rope. 4 – Tree Branches. 5 – Sports Equipment. 6 – Nails. 7 – Copper Pipes. 8 – Upholstery Tacks.
