Table of Contents
Why doesn’t my chainsaw cut straight?
Uneven cutting teeth is often the cause. If the chain is cutting to the left that means the right teeth on the chain are longer, and vise versa. To correct, sharpen only the side with the longer teeth. If the bar has worn unevenly it will also cause the chain to not cut straight.
How do you make a chainsaw cut smooth?
Can a chainsaw cut horizontally?
Underbucking (Undercutting Chainsaw Technique) This cut is accomplished by cutting up through the underside of the log or branch that’s sitting horizontally.
Why does my chainsaw cut curves?
Check the size of the top plates, which sit on the longer sections of each tooth on the chain. These top plates should be the same size. If some are shorter than others, file the longer ones down to match. Keep the same angle on all the top plates as you file – angles that don’t match also can cause curved cutting.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear. This reduces a chainsaw’s ability to cut accurately.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Why does my chainsaw go blunt quickly?
What is this? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast. It won’t be hard to notice whether the wood that you’re cutting is dirty or not.
Why does my chainsaw burn the wood?
If the oil pump for the bar oil is not pumping oil on to the bar it will cause the chain and the bar to get very hot. If this is happening, it may cause the wood to burn. The only other thing I can come up with is the chain may be very dull or on backwards.
How long should a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
How many times can you sharpen chainsaw chain?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
What are the holes in a chainsaw bar for?
These two holes are used to hold the saw blade. if your chainsaw blade not have holes or just have one hole. it not work. if you know how to drill, you can drill two holes on your chainsaw blade.
What chainsaw do loggers use?
The Stihl 500i is generally seen as the ultimate logging chainsaw. It is Stihl’s top-of-the-line professional chainsaw and has been designed and built especially for the logging industry and professional arborists.
How many people are killed by chainsaws every year?
They can also quickly cause severe injury or death. According to the Centers for Disease Control and Prevention (CDC), approximately 36,000 people are injured by chainsaws annually.
Can I use a chainsaw without a Licence?
You don’t need a license or to have training to buy or use a chainsaw. Safety should always come first when using a chainsaw, so you should have safety clothing and equipment, including a helmet, safety glasses, ear defenders and specialist chainsaw gloves and trousers, as well as steel toe-capped boots.
How do I stop my chainsaw kickback?
Stand to side of the cutting path of the chain saw. Position yourself so that you are not near the cutting attachment when the chain saw is running. Know where the bar tip is at all times. Install a safety tip that covers the nose of the guide bar on the saw to prevent contact with the kickback zone.
Can you cut a 2×4 with a chainsaw?
Chainsaws offer brute cutting power, but they aren’t the most accurate tool in the shop. Nevertheless, you can make a level cut with your chainsaw using this simple technique. You can build a basic square jig using 2 x 4s and a level, and then slide it over the log or pole you want to cut.
