Table of Contents
How do you make a swag curtain?
Start by hanging one end of the swag over one end of the rod. Then, hang the other end of the swag over the other end of the rod. Let the fabric in the middle drape down. When you’re finished, the draped fabric in the center should look like a regular curtain swag.
How much fabric do I need for a window scarf?
The obvious answer is that it depends, but you should expect to need somewhere between 1-1/2 to 5 yards of face fabric for a standard 36- to 40-inch window. For double-wide windows (about 70 to 80 inches wide), about 2-1/2 to 8 yards of face fabric is a realistic estimate.
How do you keep a scarf valance from slipping?
Keep the swag from slipping by attaching the underside of the valance to the top of the rod with two-sided tape.
How do you wrap a scarf around a window?
Wrap the scarf over the curtain rod several times on each side of the clip. For a narrow window, wrap the scarf two to four times. For a larger window, wrap the scarf eight to ten times.
What is a jabot curtain?
A jabot /ʒæˈboʊ/ ( listen), also called cascade or tail, is a vertical pleated piece of window treatment used with festoons or swags along the top of a window on the inside of a building.
How wide should curtains be for 70 inch window?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How do you hang curtains without a rod?
5 Creative Ways to Hang Curtains Without Rods upholstery tacks. tension cables. hook-eye screws and drapery pins. staples and furring strips. cabinet knobs.
How do you wrap curtains around a rod?
Wrapping Around Curtain Rod Lay the sheer out straight and fold it in half. Place the center of the sheer on the center of the curtain rod and attach with a large binder clip or a piece of masking tape. Wrap the sheer over the curtain rod several times on each side of the binder clip.
How do you fold a scarf into a curtain?
Begin folding the scarf in accordion-style pleats, keeping the fabric in sync with your folding partner’s end. Keep the material taut between you as you fold. Fold your pleats about 3- to 4-inches wide, depending upon the size of your window and scarf. Fold the scarf in this manner until you reach the end.
How do you put on curtain scarves?
Loop the scarf around the middle of the rod for an extra decorative touch. Thread the fabric underneath and behind the curtain rod in the middle, then back up over the top to create a wavy drape in the middle. Hook the scarf on each end of the curtain rod and let the sides hang down evenly.
How long should Jabots be?
Measure the length from the mounting board downward to the lowest point at which you want the jabots to fall. This is commonly one-third of the full drapery or window length.
How far should curtains extend beyond window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
What curtain length is best?
How Long Should Curtains Be? Floor-length is the way to go, unless there’s a radiator or a deep sill in the way. Ready-made panels are available in lengths from 63 to 144 inches. Measure from the floor to where you’ll hang the rod, then round up.
Do curtains have to touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
What are window scarves made of?
Sheer fabrics allow light to pass through and soften the look of your window treatment. Organza and chiffon are the most popular sheers for window scarves and suit nearly any style room or window. Lightweight gauze is casual and beachy, evoking the feel of a seaside cottage.
How do you hang a scarf valance on a bay window?
Start by draping one end over the rod from behind; wrap the scarf valance around the rod three or four times, with the ends hanging down on the outside of the two side windows. For each wrap, pull the material down for a swag look; the swags hang alternately over and under the rod.
How long should a window scarf be?
Although the length of the scarf depends on the finished look desired and the size of the window, as a general rule the ends should hang down at least two-thirds of the length of the window, while still allowing for a nice swag over the top of the glass.
How do you make a Sheffield Valance?
How to Make a Sheffield Valance Measure and mark the width of your window and add one inch for a hem on each side. Measure and mark for how long you want the valance to hang and add at least two inches for a hem. Cut the fabric according to your measurements and pin the pleats in place.
What are cascade curtains?
Get Latest Price. A zig-zag shaped piece of fabric falling gracefully from the top of a drapery or top treatment. Cascades can also be called an ascot or jabot, depending upon the shape and pleat pattern used. The definition of these two window fashion items can be confusing.
How do you fold a fishtail swag?
Lay your pressed fishtail swag on a flat work surface with the lining side up. Then fold accordion style. Each fold should be about 4 inches wide (as shown). You should end up with the patterned side down on the bottom fold and the patterned side up on the top fold.
