Table of Contents
What material are planer boards made of?
BUILDING THE PLANER BOARDS. Select a light wood of sufficient size. Common 1″×8″ is sufficient (3/4″×7½” nominal). Cedar or pine works well (plywood is too heavy).
How do you make a big planer board?
Are planer boards necessary?
What is a Planer Board? Planer boards, for a lack of a general definition, are simply tools to get your fishing line away from the boat. If you’re trolling long flats that run for miles, planer boards are a necessity for the amount of extra ground they cover.
Can you troll without planer boards?
Without planer boards, most anglers will run four to five lines out the back of the boat max on most walleye rigs. There are several variations to accomplish this but generally, the rods out the very back of the boat are out at more line.
How do you make planer boards pull harder?
Premium Member. One trick is to loosen the nuts on the back rod and move the middle and outer board in about 3/4 inch. This gives the board more bite and often helps them pull harder. You can move the eye – back – in 1 inch increments – to get them to pull harder.
How deep do planers run?
How Deep can Planers Get? The depth to which a planer dives depends on the area of the plate, the speed of the tow and the length of the planer line. As a general rule of thumb, you can expect around 15ft (5m) of depth for each 30ft (10m) of planer line deployed.
What is an in line planer board?
Definition of inine planer board Small planer boards directly attached to the mainline of a trolling rod. Inine planer boards are designed to create space between multiple lines being trolled. They attach to the mainline on one end, with a clip on the other end.
How fast do you troll for walleyes?
What Speed Should You Troll For Walleye? It depends on the time of year and water temperatures. Trolling speed, in the spring, is best at 1.3 – 1.5 mph. Summer trolling speeds increase 1.5- 2 mph as walleyes are more active in warmer water temperatures.
How short of a piece of wood can you run through the planer?
Most planer manufacturers advise against planing pieces shorter than 12″.
Does a planer make wood smooth?
Smooth rough-cut wood stock with a planer. The planer is a tool for woodworkers who require large quantities of planed stock and who elect to buy it rough cut. It, too, cuts with a cutterhead, but the planer smooths the face of much wider stock.
Can you use planer boards with bottom bouncers?
Can you use planer boards with bottom bouncers? Yes, you can use planer boards for trolling with bottom bouncers. But keep in mind that if you’re using a crawler harness, you may end up losing some fish if the walleye bite is timid, since you can’t reel in the line fast enough to react to these bites.
How deep does a number 4 planer go?
Available in sizes #1 through #4. Will reach depths from 5′ to 35′ depending upon your trolling speed.
How much line should I let out for a troll?
Trolling Depth Trick #3 Consider the following example: If you’re trolling a tandem rig tied with two five-ounce bucktails (5 x 2 = 10), and you let out 100 feet of line (double 50, so multiply by two again), according to the Rule it will run at about 20 feet below the surface (5 x 2 = 10 x 2 = 20).
How fast do you pull bottom bouncers?
A good trolling speed for bottom bouncer fishing ranges from 1.0 MPH to about 1.5 MPH. Speeds this slow are going to require a small gasoline kicker motor or an electric trolling motor.
How deep can you fish planer boards?
Considerations to depth: When you go fishing, you always want to consider the depth that you will be fishing at. Fishing with a planer board will be no different. With a planer board, you will usually want to fish in depths between 30 feet and less.
How do walleye planer boards work?
Planers take lines and lures out to the sides of the boat, allowing anglers to cover a wider trolling swath, simultaneously run multiple baits, and minimize spooking fish in clear or shallow water. They’re particularly effective when walleyes are moving between areas.
What is the best speed for trolling?
So, what is the best trolling speed? The best trolling speed depends on several factors including the type of fish, water conditions and lure choice. In general, trolling speeds between 1.5 and 2.5 mph, as measured by GPS, are a good starting place for most species like walleye, trout and salmon.
Should you troll with or against the current?
When in an area with current, troll crosscurrent as opposed to with and/or against the current. Going crosscurrent, you don’t have to worry about how the current is affecting your lure’s or bait’s speed through the water. Plus, fish generally swim into the current.
What is a good lure for walleye?
Minnows. Minnows are the most popular bait option for walleye anglers, I have found consistent success with shiner and flathead minnows. When targeting bigger fish, shiners in the 4-6″ range are the mainstay, these will weed through some of the smaller fish and get you on 25″+ Walleye.
How deep does a number 6 planer go?
Pulled 100 feet back on 100-pound Power-Pro, the #6 planer carries baits down approximately 25 feet. Rigged baits such as the Classic Mullet Strip and lures can be successfully fished down deep behind a planer.
How do you fish for wahoo?
High-speed trolling is certainly an effective way to catch wahoo, but so is slow trolling dead bait or lures, trolling live bait, dropping jigs or trolling beneath floating debris, chunking and even kite fishing. Nine wahoo fishing experts weigh in with their tips and techniques to catch these big, fast fish.
