Table of Contents
Should valances be lined?
Things You’ll Need Take the time to line the valance so your window treatment looks fuller, crisper and hangs properly. Lining a valance also protects the fabric from sunlight. Depending on personal preference, mount the lined rod pocket valance on a bare window or with draperies or blinds.
How do you line a ready made valance?
Lay the lining over the curtain, evenly, face down. Secure all edges together by inserting pins every 2 inches. Secure the lining to the curtain by inserting the pin down through the lining and into the curtain, then back up through the curtain and the lining ¼ to ½ inch over from where the pin was first inserted.
How do you line a rod pocket curtain?
Lay the curtain fabric and lining together, right sides together. Line up the top edge and one side edge. Sew the side edges together using a 1/2″ seam allowance. Keep the top edges lined up, and move the lining fabric over so that the other side edges line up.
How much fabric do I need for a valance?
The obvious answer is that it depends, but you should expect to need somewhere between 1-1/2 to 5 yards of face fabric for a standard 36- to 40-inch window. For double-wide windows (about 70 to 80 inches wide), about 2-1/2 to 8 yards of face fabric is a realistic estimate.
How wide should a valance be for a 36 inch window?
To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.
What is a valance board?
Definitions of valance board. a decorative framework to conceal curtain fixtures at the top of a window casing. synonyms: cornice, pelmet, valance. type of: framework. a structure supporting or containing something.
How much narrower should curtain lining be?
Regular lining should be 7.5cm (3″) shorter than the curtain fabric. Thermal lining is too bulky to create a double hem, so needs to be 17.5cm (6⅞”) shorter than the curtain fabric.
How do you add lining to curtains without sewing?
One of the easiest ways to join your blackout lining to your curtains is with the help of something called fusible hemming web. This can be used for joining two fabrics together. Simply place the hemming web tape between the two fabrics and then using a standard iron press together until they are bonded.
How much fabric do I need for rod pocket curtains?
Decide what curtain rod you will use to hang the curtain. If it is a thin rod, then you want your fabric to be 8-10 inches longer than the desired length of your final curtain. If it is a thick rod, then you want your fabric to be 10-12 inches longer than the desired length of your final curtain.
What is the best lining for curtains?
What is the best fabric for lining curtains? Cotton. Cotton is the most famous curtain lining. Polyester. Polyester is a synthetic fibre that is strong and does not wrinkle easily. Polycotton. Polycotton lining is made up of polyester and cotton. Polycotton Sateen Twill.
How do you attach lining to sheer curtains?
Sewing the lining and curtain fabrics together at the curtain’s top, which will allow the sheer fabric some movement. Lay the sheer fabric panel flat with the lining fabric on top, front facing down. Sew along the top edge, 1/4 inch from the edge. Fold this edge 1/4 inch onto the wrong side of the lining fabric.
How do you measure a swag valance?
Starting from the top of the pole on the left-hand side, take your flexible measuring tape and re-create the arc of the swag over to the top right-hand side of the pole. This is your swag measurement. You need to measure the lowest part of the draped swag in order to get the appropriate amount of fabric.
What is the standard size of a valance?
If you’re shopping for ready-made valances, the most common standard size you’ll likely come across is a 50-inch wide valance. If you’re hiring a custom workroom, you can specify any size.
How much of a window should a valance cover?
For most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.
What is the average length of a window valance?
It depends on the style of the valance, as well as how it’s installed and how high the ceiling is. Outside-mounted valances usually have an average drop length of 17 to 21 inches if hung on walls with 8-foot ceilings, and that length gets proportionately longer as the ceiling gets taller.
How much wider than the window should a valance be?
Most valances should only be 1-1/2 to 5 inches wider than the window if the valance hangs by itself or over a Roman shade. It should be 10 to 30 inches wider than the window if it’s hung over a pair of custom drapes. If the valance is gathered, its total, flat width should be 2 to 3.5 times the width of the window.
What size valance do I need for a 40 inch window?
Our example window is 40 inches wide, including the window frame. That means that the valance should cover a total width of about 42 to 44 inches once gathered. Using a 2- to 2-1/2 times fullness calculation, that means that the valance (when laid flat) needs to be between 84 and 106 inches wide.
How much fabric do I need for a box pleat valance?
Calculate the fabric widths. The finished width of the valance is three times the width of the window, so multiply the window width times three. For instance, a 35-inch width requires 105 inches of fabric. Note that most fabric is 45 or 54 inches wide.
How long should a pleated valance be?
Most likely your valance will be long enough to come into the window {it should be: at least 2″-3″ minimum} so you’ll want the fabric lined when the light shines through the window. Anything with a good amount of polyester will work fine.
What’s the difference between a valance and a cornice?
Curtain Valance vs. The primary difference between a curtain valance and a cornice is that valances are made out of drapery or fabric, while cornices are typically made out of wood. Valances also add a softer accent to a room.
How wide should a cornice board be?
The width of the cornice box depends on the width of the window; typically your cornice box should be 1 to 2 inches wider than either the window or the curtain rod.
