Table of Contents
Can I make my own chandelier?
If you want a chandelier or a light fixture that looks industrial, steel pipes and fittings are the way to go. You can use them to create a custom fixture and you can make everything yourself from scratch.
How do you measure for a lampshade for a chandelier?
Lamp shade dimensions are typically measured as top x bottom x slant. Top denotes the diameter (or width, if measuring a square lamp shade) of the top of the lamp shade. Bottom denotes the diameter (or width) of the bottom of the lamp shade. The slant is the length of the side of the lamp shade.
What are the different fittings for lamp shades?
There are three basic types of lamp shade fittings: spider fittings, uno fittings, and clip-on fittings: Spider Fittings: Spider fittings are the most common type of fitting for table and floor lamps and are used with harps.
Are lamp shades universal?
Fitters are not interchangeable, so be sure to use a shade with the correct fitter for your lamp. There are the three common fitters: Spider, Clip-On, and Uno. The spider lamp shade is the most common type of fitter for table and floor lamp shades.
How wide should a lampshade be?
The shade should be twice as wide as the lamp base, and one third of the total height of the lamp. So for a 6-inch lamp base, the shade should be at least 12 inches wide. And if the total height of the lamp (including the bulb and harp) is 24 inches, the shade should be 8 inches tall.
How big should a lampshade be on a lamp?
The width of the lampshade (diameter at the bottom) should be roughly equal to the height of the lamp base. The height of the lampshade should be about two thirds the height of the lamp base. The lampshade should be the wider than the widest part of the lamp base.
What is a screw on lamp shade?
What is a screw on lamp shade? A screw on lamp shade is mounted on top of a shaped wire, which is attached to the lamp base and goes around the bulb. It is then secured in place by a screw-on decorative finial on top of the lamp.
What is a shade fitter?
The fitter is the outer diameter of the lip which is inserted into the fixture’s shade holder. This will measure a little less than the fitter size so it can fit into the shade holder of the same measurement. The height of a glass shade is taken from the base of the fitter lip to the bottom of the shade.
What does Spider mean in a lampshade?
A: spider refers to the cross bar configuration at the top of the shade, which requires a harp fixture rising from the base of the bulb to the top, upon which a screw-on finial holds the whole shade together.
How do you make a homemade chandelier out of paper?
Making the chandelier: Draw one half of the chandelier’s silhouette, similar to the one pictured, on your paper. Cut out the silhouette. Tape the stencil onto the cardboard and trace. Repeat the previous step. Carefully cut out both silhouettes using scissors and an X-ACTO knife.
How do you make an old chandelier look modern?
Upgrade an Outdated Chandelier Apply Spray Paint. If you have a dated chandelier (Image 1) that you’d like to give a distinctive and classic look, begin by spray-painting the chandelier using a nice antique paint finish (Image 2). Add Decorative Candle Sleeves. Add Hanging Crystals.
Will any lampshade fit any lamp?
Lampshades come in all shapes and sizes and can be paired with the right sized lamp base when fitted well. You also need to understand which fittings are ideal for different lamps. .
Can you put any lampshade on any lamp?
Mixing and matching your lamp bases with different shades allows you to create a personalized design for your space. In most cases, the type of fitter is not interchangeable, so be sure to match the shade attachment to a compatible lamp base.
What are the 3 types of lampshades?
Once you’ve picked the appropriate size of your lamp shade, you need to consider how it will attach to the base. The three most common types of lampshade assemblies are: Spider, Uno and Clip-on (see diagram).
What is an empire style lamp shade?
In general, the empire style is one in which the top diameter of the lampshade is about ½ of the diameter of the bottom of the lampshade; the style exhibits a straight, gentle slope from the top of the lampshade to the bottom of the shade.
What height should a lampshade be?
Traditionally, the height of a lamp shade should be around half of the height of the lamp base. So, start by measuring your lamp base height, and then divide this measurement by two. For example, if your total lamp base height is 25 inches, then your shade should be around 12.5 inches high.
Do lamp shades need to match in a room?
You don’t have to match all the lamps in a room. More precisely, you don’t have to have identical lamps. However, if you want a cohesive design, make sure they relate to one another in some way, either through shade color and shape, materials, or similar color schemes.
What is a drum lamp shade?
The most versatile of lamp shade styles, a drum lamp shade is symmetric and cylindrical, perfectly round and with identical top and bottom openings. Drum lamp shades can also be used on everything from table lamps or desk lamps, to ceiling lights or floor lights – a truly versatile choice.
What is the harp on a lamp?
A lamp harp is the component of a lamp to which the lamp shade is attached. It typically comes in two separate parts, a saddle which is fastened under the lamp socket, and the harp itself which consist of a lightweight frame attached to the saddle at its lower end and extending upwards to a point above the bulb.
