Table of Contents
How can I make my mousetrap car better?
Adding a larger drive hub can improve pulling power. In some images there is a rubber tire on the axle, this acts as a “gear” and reduces string slippage. Use the longest lever available to extend the mousetrap arm as far as possible. The tip traverses a greater distance allowing more wheel wraps of string to play out.
What are the best materials for a mousetrap car?
A mousetrap car can be made from cardboard or balsa wood with CD’s for wheels and axles of wood or brass tubing. Power to drive the wheels is provided by a mousetrap to which a wand and string is attached to the snap arm.
Are big wheels better for a mousetrap car?
Larger drive wheels will have a greater travel distance per each turn compared to smaller drive wheel. It would make sense to use a super huge drive wheel so for each turn of this massive drive wheel the mousetrap vehicle will travel an incredible distance.
What makes a fast mousetrap car?
A speedy mousetrap car will have smaller wheels (faster acceleration), a shorter lever arm (increased torque, but smaller travel distance), a larger axle (increased acceleration) and will generally be smaller to decrease air resistance.
How long should a mousetrap car be?
The ideal size for an ultra big wheel on a long distance mousetrap racer seams to be somewhere between 10 and 15 inches. And the ideal size for a drive wheel on a speed-trap racer seams to be between 2 and 3 inches but no more than 4 inches.
Why is my mousetrap car not going straight?
If your mousetrap car does not travel straight energy is also being wasted to over come the force of friction turning the vehicle’s wheels. If a mousetrap vehicle is not traveling straight then there is one reason and one reason only: the front and rear axles are not parallel to one another!Jan 21, 2012.
What wheels should I use for a mousetrap car?
As you might guess, the materials used to build mousetrap-powered cars are light out of necessity. Foamcore board or balsa wood are often used for the body. The wheels can be off-the-shelf radio-controlled car wheels, but many builders use blank CDs or DVDs because their thin edges reduce friction.
How far did the world record mousetrap car go?
Description: The secret to Doc Fizzix’s world record setting mousetrap distance racer that traveled over 182 meters was it’s unique pulley system. This is the same pulley set-up that was used on Doc Fizzix’s world record setting mousetrap distance car.
What is an axle hook on a mousetrap car?
An important part of a mousetrap vehicles propulsion system is the axle hook. If the string does not properly release from the drive axle the string will rewind around the drive axle and cause the mousetrap car to come to an instant stop.
What makes a mousetrap car slower?
Friction. Friction would make the mousetrap car slow down, so it is best to reduce friction as much as possible. Moving parts will cause friction. Since friction will increase with the amount of moving components, the goal is to make the design of the mousetrap car as simple as possible (but still making it functional).
How do you slow down a mousetrap car?
If instead the mousetrap vehicle is shins it’s wheels when placed on the ground, or traveling two fast causing it to have to much friction, you may have to increase the length of the mouse trap’s lever arm and reposition the mouse trap away from the drive axle in order to slow the vehicle down and decrease the pulling Jan 20, 2012.
What is the fastest mousetrap car?
The Speed-Trap Racer is the fastest mousetrap powered racer anywhere and was designed after Doc Fizzix’s own record-setting mousetrap racer that traveled 5 meters in 1.2 seconds.
What is gravity vehicle?
Gravity Vehicle is an event that returned for the 2020 and 2021 competition seasons after being held in 2012 and 2013. In this event, competitors design and build a ramp and a vehicle that is powered solely by the vehicle’s gravitational potential energy.
Is weight important in a mousetrap car?
Reduce the most friction you can because the more friction the more energy is lost in propelling the car. Mass should also be taken into account, the more the car weighs the more energy from the mousetrap spring will be used so it’ll be best to make the car light weight.
Is it better to have a lighter or heavier mousetrap car?
A heavy mousetrap vehicle will required more pulling force than a lighter mousetrap vehicle in order to achieve an equal acceleration. Lighter mousetrap vehicles will require less energy at the start and can use longer lever arms for more pulling distance.
How long should the lever arm be on a mousetrap car for distance?
For maximum speed, position the mousetrap 2 1/4 inches from the drive axle and cut the lever arm to a length of 4 1/4 inches. The lever arm can be cut using a dremel tool or by using a fine tooth hobby saw. The lever arm should always be “just” long enough to reach the drive axle or performance will be compromised.
How does weight affect a mousetrap car?
Mousetrap Vehicles: Weight Distribution Weight distribution can have a large effect on a vehicles performance, if the weight of a vehicle is concentrated to far away from the drive wheels there may be a greater tendency for slippage at the start line.
