How To Make A Desk Top

What should I use for the top of a desk?

6/4 Solid Maple is the Best Wood for a Desk Top 6/4 lumber is jargon for wood that is 1-1/2″ thick “rough” or usually just over 1-3/8″ planed. And it is a top choice for a desk top for looks and durability.

Is it cheaper to build your own desk?

The answer is NO. Building a computer desk can cost you cheaper. But what really matters is the size and the material of the desk you wanna build. Cheaper doesn’t mean higher quality (PS- It also doesn’t mean lower quality).

What wood should I use to make a desk top?

What wood works best for a DIY desk? Cherry wood. Cherry wood can either be a light brown or a deeper reddish-brown color. Maple wood. Maple wood is very strong and comes in a reddish or light brown color. Black Walnut wood. Quarter Sawn Oak wood. Ash wood.

How do you make a table top without a planer?

So you need a flat board for your woodworking project, but you don’t have a planer.6 Ideas to Plane Wood without a Planer Use a table saw. Use a router. Use a jack plane. Use a wide-belt or drum sander. Get out the sandpaper. Take it to a cabinet maker.

Why are desks so expensive?

Desks are so expensive because they are designed to be a piece of furniture that lasts for at least a decade or two. Expensive desks are made from solid wood pieces that are precision milled and joined with premium hardware. They have detailing and extra features that are not part of cheap desks.

What is a good depth for a desk?

The work surface should be between 20 and 30 inches deep and at least 24 inches wide. For maximum flexibility, the height should be that of a conventional writing desk, about 28 to 30 inches, with the keyboard resting on an adjustable shelf.

How much wood is needed for a desk?

Cut your wood to the appropriate dimensions. For a 2 ft (0.61 m) x 4 ft (1.2 m) desk, you would simply cut two 8 ft (2.4 m) 2×6 boards in half lengthwise to get four pieces that you can then assemble into a single plane.

Is MDF good for a desk?

Stronger Than Plywood and Particle Board Compared to plywood and particle board, MDF offers superior density and strength. The manufacturing process creates a super dense material that can withstand a tough work environment and provide a no-sag surface for desks, shelves and other office furniture.

Is Pine good for a desk?

The advantage of building a computer desk with pine wood is, it is easy to paint and stain well. Pine is a durable wood with decay resistance.7. Pine. Pros Cons Beautiful light brown-yellowish appeal Less versatility Lightweight No wear resistance.

What are school desks made out of?

The most common classroom desks are made of either solid plastic or particleboard covered with a laminate or melamine finish. Solid plastic is the more durable choice, however, the particleboard is less expensive and will also give you many years of use.

How do you make a wooden table top smooth?

Load a sanding block with 600-grit wet/dry paper, dribble on some soapy water and rub the finish smooth. Then wipe the table dry, look for flaws and rub some more. Don’t stop until you achieve perfection. Smooth shaped edges with synthetic steel wool.

Do you need a planer to make a tabletop?

You don’t need a jointer or a planer anymore than you need any tool, but they sure are do make wwing easier and more accurate. A jointer is the best tool for making the face of a board flat, straight, and square to an adjacent edge.

What is a lacquered surface?

In modern techniques, lacquer means a range of clear or pigmented coatings that dry by solvent evaporation to produce a hard, durable finish. The finish can be of any sheen level from ultra matte to high gloss, and it can be further polished as required.

Why are Jarvis desks so expensive?

Standing desks are expensive because they use costly wood table tops and dual electric motors for height adjustments. They use solid wood and quality motors which are expensive to manufacture. Low wobble tolerances make desks harder to manufacture at a low cost.

Are desks expensive?

Like any type of furniture, desks can run the gamut on price, but you definitely don’t need to spend a ton of money to get a desk that looks good. We love the clean lines of this easy-to-set-up desk.

Should your desk face the wall?

For some, having their desk face the wall is their preferred direction as it limits distractions the most by helping you avoid gazing out the window or watching people pass your door. Depending on the size of your office, facing toward the wall could confine you to a small, claustrophobia-inducing corner.

How much overhang should a desk top have?

To avoid splitting of surfaces, we recommend a small overhang of . 5” on either side of the frame/surface.

How big of a desk do you need for 2 monitors?

To buy a desk for dual monitors, a size between 47-55″ can be considered . You can use a desk around 50″ for placing two monitors. A desk slightly bigger than 50″ is more helpful as you can accommodate your other gaming gear on the desk conveniently.

How thick should a desk be?

As a general rule, 19mm thick sheets of plywood are the sweet spot for desk building. At this thickness you have the required strength to keep your desk strong in most circumstances and not have to worry about warping.

Does IKEA use MDF?

While it’s true that IKEA makes extensive use of MDF—they are the biggest users of MDF world-wide—this by no means makes them unique among cabinet manufacturers, nearly all of whom use some form of engineered sheet products in the construction of the basic cabinet boxes.

What does MDF stand for?

MDF is an abbreviation for Medium Density Fiberboard. People tend to look down on MDF and automatically assume solid wood is the better choice.

Is MDF stronger than plywood?

MDF is ideal for cutting, machining and drilling, since it does not chip easily. On the other hand, plywood is a much more stronger material, which can be used for doors, floors, staircases and outdoor furniture.