Table of Contents
What size wood should I use for decking frame?
Commonly used joist sizes are 2-by-6, 2-by-8 and 2-by-10. For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.
Can I use 4×2 for decking frame?
4 x 2 Timber Rail / Joist These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.
What do you use for deck frame?
The first board to be cut for the deck frame, and probably the most important, is the ledger board.Deck Framing Details Circular saw. Tape measure. Level. Carpenter’s pencil. Chalk line. Speed square. Framing square. Hammer.
Should deck joists be 2×6 or 2×8?
In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. The larger the deck, the larger the joists. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards.
How far apart should joists be on a deck?
Deck joist spacing should never exceed 16″ on center (with the exception of MAX deck boards, which allow for maximum 24″ on center). For a more rigid feel, 12″ or less may be preferred. If adding additional framing, be sure to keep all boards level and in plane across the tops.
What is the cheapest way to build a deck?
Choose wood, but carefully: Untreated wood decks are generally the cheapest to install, but don’t forget long-term costs. Wood decks require yearly maintenance and deteriorate quickly if they don’t get it.
How do you build a simple deck step by step?
Step 1: Attach the Ledger. Photo by David Carmack. Step 2: Protect the Ledger. Step 3: Set Footings and Piers. Step 4: Install Post Bases and Side Rim Joists. Step 5: Install Front Rim Joist, Beams, and Interior Joists. Step 6: Install Front Rim Joist, Beams, and Interior Joists (continued) Step 7: Attach Trim and Decking.
Is 2×4 OK for decking?
Yes but you will need to support the 4×2 at their midspan with something to stop any flex, usually posts or beams are used but if you’re tight for space dig a channel out of the ground a bit, tamp some scalpings down and bed preformed 4×3 concrete lintels down level and in line and support the joists off these.
Can I use 2×4 for deck joists?
The short answer is yes. 2x4s can work for deck joists. However, they aren’t ideal for spanning long distances without bending or breaking, so you have some limitations. Choosing 2x4s for a low-sitting deck is perfect for keeping your feet out of the mud.
Can a deck be built with 2×4?
Can you use 2×4’s for a ground-level deck? A ground-level deck can be built from 2×4 if the span is less than 5’8″ (1.72m), using ground contact treated lumber. Under a 2×4 deck, the ground will need to be covered to prevent weed growth through the decking on such a low deck.
Can I use untreated wood for deck?
Yes, you can use untreated wood to build a deck, but not without preparing it first. You can’t, of course, pressure treat it yourself, but you will need to seal; the wood and stain/paint it to ensure the wood is ready to take on the harsh external weather.
How do you build a deck without digging holes?
If you’re ready to start planning, there are two great options to build a deck without digging any holes: surface deck blocks and deck foot anchors. The cheapest foundations are deck blocks, which can be purchased for less than $12.00 a piece. Deck blocks sit on the ground, so proper planning is essential.
Can 2×6 be used for deck joist?
You can use 2×6 as deck joists if the deck is low enough to the ground as not to require guard railing. When using S-P-F 2×6 deck joists, the span must not be greater than 9’0″ (2.73m) with joists at 16″ o.c. (400mm), and 9’10” (3.01m)with spacing at 12″ (300mm).
How far can a 2×6 decking span without support?
2-grade 2×6 joists can span up to 10 feet 9 inches from beam to beam when spaced the standard 16 inches apart with a maximum live load of 30 inches per square foot.
How far can you run a 2×8 without support?
A rule of thumb is 1.5 times a joist’s depth but in feet when spaced at 16” centers. In general, a 2×8 will span 1.5 x 8, so 12-feet.
How many support beams do I need for a deck?
For a deck that is 15 feet wide with 2×10 joists spaced at 16 inches apart, you have two options. You can use two beams, one at 7.5 feet and one at 15 feet, to provide support.
How many joists do I need for a 12×12 deck?
For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists.
Do I need blocking between deck joists?
Blocking, according to the building code, is required at the open end between joists to prevent rotation or at 8-foot maximums if the joists are greater than 2×12 in dimensions. Most builders, though, recognize that blocking every 4 to 6 feet unifies the frame and improves structural strength.
