Table of Contents
What are chimney chase covers made of?
Chimney chase covers are commonly referred to as chase pans or chase tops. They are typically a rectangular-shaped piece that covers the top of your chimney made of brick, wood, vinyl, or metal siding.
Should a chimney chase be insulated?
“If the climate in your area is very cold, insulate the chase to the top to keep the chimney warmer, increase the draft, and reduce creosote buildup. We also recommend to insulate the ceiling of the chase just as if it were in the attic space.
Is a chimney chase necessary?
One of the most important parts of the manufactured fireplace may also need the most regular maintenance. The chase cover plays an important role in protecting the rest of the fireplace and chimney system from the elements; because of this, it is a necessary part of any manufactured chimney and needs regular upkeep.
How do you seal a chimney chase cover?
Just a thin bead of silicone is required to properly seal the storm collar and chase cover. Using a high-temperature exterior silicone that is UV protectant, will ensure you never have to check the seal of the chimney cover.
How much do Chase covers cost?
Chase Cover Prices The average cost to have a new stainless steel chimney chase cover can range from $1200 – $3000 depending on the type of house, the number of holes needed and how accessible the top of the chase is. All chase covers are not built the same!.
How long do Chase covers last?
Chimney chase covers that are made of galvanized steel tend to rust quickly and will usually need to be replaced about every five years. Copper and stainless steel ones are much stronger and may last for your lifetime as long as they are not damaged by a severe weather event or fallen branch.
How do you measure a chimney for a chase cover?
The easiest measurement to take for a chimney chase cover is the length and the width of the chase. Make sure to measure both opposite sides of the chimney to ensure that one side is not longer than the other. For a good fit, always measure the chimney chase or brick chimney itself, not the old cover.
What is the difference between a chimney crown and a chimney cap?
Chimney caps are installed at the top of the chimney and protect the flue against water and wildlife as well as prevent sparks from escaping. On brick chimneys the cap is installed directly onto the chimney crown. The chimney crown is the equivalent to the chase cover.
Do chimneys have covers?
In the construction world there are two types of chimneys, a traditional brick and mortar chimney and a wood framed chimney chase. Both should have a chimney cover and a chimney cap. Covering the top of your chimney is an important thing to do to prevent costly damage caused by the elements.
What goes on top of chimney?
A chimney crown, also known as a chimney wash, is a slab of cement that covers the top of the chimney. While the chimney cap covers the opening of the flue, the crown covers the whole top of the chimney. The crown prevents water from entering the chimney.
What is a chimney cap for?
Chimney caps are useful for controlling sparks and preventing fires. Sometimes a fire can throw spark up the chimney and out the flue. This can potentially catch your roof on fire causing terrible damage.
How do you insulate a chase fireplace?
Cut plywood to fit the outside of the chimney chase. Screw it to the chase with 2-inch screws, being sure to butt each piece tightly to the next. Caulk the vertical seams with silicone caulk. Install batt insulation to the underside of the chase with a stapler.
How do you insulate around a chimney chase?
The exterior walls of the chase that are below the attice should be insulated and drywalled the same as the rest of the walls in the house. This should be sealed up with the main wall envelope of the room. This maintains the envelope seal and prevents cold air from coming in behind the fireplace.
How much does it cost to build a chimney chase?
For a masonry chimney that is 30 feet in height, expect an average cost range between $4,000 and $8,000, with most homeowners paying around $6,500 for the job.Chimney Cost. Chimney Installation Cost National average cost $6,500 Average range $4,000 – $8,000 Minimum cost $3,500 Maximum cost $11,500.
How much does it cost to replace a chimney chase?
Chimney Chase Cover or Cap Replacement Cost Expect to pay $150 to $200 with installation for a new chimney cover. The cover (sometimes called a cap) protects your flue and is at the very top of the chimney.
What is the cover for a chimney called?
The chase cover — or “chase pan,” as some people call it — is the square or rectangular piece of metal that is fitted to sit securely on top of your chimney chase, helping to keep water and other environmental elements out.
What is a flue chase?
A chimney chase is the long, narrow space that runs from the fireplace up the chimney and through the roof. The chimney chase houses the flue pipe. It’s what you probably think of when you hear the word “chimney,” that rectangular structure on the roof of your house that smoke comes out of.
How much does a chimney cap cost?
Chimney Cap Installation Cost Installing a chimney cap costs $300 on average, ranging from $75 to $1,000. The cap runs $35 to $550 depending on material and size. In most cases, you’ll pay $100 to $200 for installation.
