Table of Contents
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
Why does my chainsaw cut slow?
The most common cause of a chainsaw that won’t cut properly is a dull cutting chain. Try sharpening or replacing the chain. The chain may not have the proper amount of tension. If the chain is too tight, the chain may not rotate at the proper speed, causing the chain not to cut properly.
How do I make my chainsaw chain more aggressive?
In general, if you want to have an aggressive cut, you are going to need a chainsaw chain that operates as quickly as possible. A chainsaw chain with full chisel teeth means that you are cutting with a very high speed. Speed being one of the main ingredients behind an aggressive chain, this is clearly vital.
Does a skip tooth chain cut faster?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
How often should you change the bar on a chainsaw?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.
Why is my chainsaw blade smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why is my chainsaw using so much oil?
An overfilled reservoir can often leak oil when the saw is turned on. Check this and siphon some off if it looks excessively high. If the oil is running out via the delivery line to the bar then there is a chance that the tank vent is plugged up. If so, the chain may be running ‘dry’ during operation.
Why do loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear. This reduces a chainsaw’s ability to cut accurately.
What does full chisel mean on a chainsaw chain?
A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
Do I need a ripping chain?
A properly sharpened and maintained ripping chain is critical to achieving the best possible end result when chainsaw milling. As the teeth on the chain dull, a new replacement chain is needed to keep cuts smooth, efficient, and safe to use.
What does full chisel mean?
Full chisel, semi-chisel, chipper The sharp corner of the full chisel cutters split wood fibers easily and provides the fastest, most efficient cutting in clean softwood. The corner of the cutters on a semi-chisel saw chain are slightly rounded.
What do the rakers do on a chainsaw?
Depth gauges, “riders,” or “rakers,” as they are sometimes called, control the amount of wood severed by a cutter tooth. During the life of a pro saw chain, they occasionally need maintenance for top cutting performance.
How fast does a chainsaw turn?
The piston ring speed on the average chainsaw travels 2,500 surface feet per minute. A chain slides across the surface of the sawbar rail at around 5000 feet per minute. The chain is moving at 55 to 60 m.p.h. or a mile per minute ( 88 feet per second ).
How often should you file the rakers on a chainsaw?
More experienced cutters have a good feel for how their saw is cutting, and simply take their rakers down whenever they seem to need it. In my case, that’s about once every five sharpenings, more or less, assuming nothing extraordinary happens, like hitting a rock.
What RPM does a chainsaw chain run at?
Depending on your saw, the reading should be between 10,000 and 14,000 rpm. That’s a wide variation, and so it’s important to look up the maximum speed of your saw before conducting this test. The engine should never run faster than the maximum speed at which it is designed to run.
How much HP does a chainsaw have?
Husqvarna Chain Saw Specs Model Cylinder Displacement Power Output 550XP 50.1 c 3.7 hp 555 59.8 cc 4.3 hp 365 70.7 cc 4.9 hp 372XP 70.7 cc 5.3 hp.
