Table of Contents
HOW TO MAINTAIN AN ABOVE GROUND POOL: Run the pool filter everyday, for 12-18 hours daily. Water level should be around mid-skimmer; not too high, not too low. Test pH level, should be between 7.4-7.6. Test chlorine level, should be between 2.0-4.0 ppm. Empty skimmer and pump baskets, as needed.
How do you take care of an above ground pool?
Here are 10 key tips for above ground pool maintenance. Install a Sump Pump in Your House. Test the Chlorine Level. Do Weekly Shock Treatments. Test the pH Level. Run the Pool’s Pump at Least Eight Hours a Day. Regularly Clean and Replace the Filter. Regularly Clean Out the Pump and Skimmer Baskets. Vacuum Often.
What chemicals do you need for above ground pool?
Things you’ll be testing for include chlorine, PH, total alkalinity, Cyanuric acid (stabilizer), and calcium hardness. The levels need to be properly balanced for safe and clean water before swimming in it. The free chlorine level should be between 2.0 and 4.0 ppm. The PH level should be between 7.2 and 7.8.
How hard is it to take care of an above ground pool?
Above ground pools, like in-ground pools, need basic care and maintenance. Mainly, cleaning, filtering, water testing, chemical levels, and protecting the structure. Above ground pool care and maintenance is just as much work as cleaning your in-ground pool. Tools are all the same as are the technics behind them.
How often should you change the water in an above ground pool?
Generally, pool water needs to be replaced once every five to seven years. This should be done during mild weather so that your pool surface is not at risk from strong sunlight and heat. Your pool maintenance company can recommend when it is time to drain your pool.
How often do you add chlorine to above ground pool?
Pool Maintenance (Ongoing) Step 1: Always keep chlorine level in the safe range on your test strip. Test after daily. Run your pool filter at least 6 to 8 hrs every day. Step 3: Add maintenance dose of algaecide per label instructions weekly. Step 4: Add 2 oz of Super Clarifier per 5000 gallons of pool water each week.
Do I need to shock my pool when I first fill it?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
Can I just throw chlorine tablets in my pool?
NEVER just throw them into your pool water. This will cause them to dissolve on the floor and it can damage and create a permanent bleach stain to your liner or concrete.
What chemicals do you put in a pool for the first time?
Chemicals Needed for Pool Start Ups Stain & Scale Preventer. Granular Shock Chlorine. Chlorine Tablets. pH Increaser and/or pH Decreaser. Alkalinity and/or Calcium Increaser. Cyanuric Acid (Stabilizer) Algaecide and Clarifiers if needed. Complete Test Kit or Test Strips.
How much chlorine do I add to my pool for the first time?
If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.
How do you treat an above ground pool for the first time?
Step 1 – Clear off the water, debris and anything else from the pool cover. Step 2 – Remove the pool cover. Step 3 – Pull the winter plugs and accessories out. Step 4 – Top up the water in your pool. Step 5 – Reinstall the pool ladder. Step 6 – Prepare the pool filtration system. Step 7 – Power your filtration system up.
How often do you fill a pool with water?
When should I drain my pool? Pool industry experts recommend you drain your pool and refill it every five to seven years. No two pools are alike, so there is no set number at which you must drain your pool.
How long do above ground pools last?
The market average life of an above ground pool may be shorter than you think at about 7-15 years. However, when you buy from a quality brand and maintain your pool properly it will last many years longer than that.
How long after putting chlorine in pool Can you swim?
It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
How do I keep my pool water clean?
How to Keep Your Swimming Pool Crystal Clear Maintain Chemical Levels. Maintaining proper chemical levels in your pool is the most important step in keeping the water crystal clear. Administer Shock and Algaecide Weekly. Backwash. Skim Regularly.
How long does chlorine last in pool water?
Tap water chlorine dissipates almost fully in a day, but pool chlorine takes about 4 1/2 days. (Rough orders aro too many variables.) There are compounds which are considerably slowed by catalysts that make keeping a swimming pool level stable.
Can you maintain your own pool?
Depending on the equipment used, cleaning a pool yourself can take up to one hour and a half and you’ll need to do this weekly. However, on average most will spend 45 mins a week and a little bit of elbow grease to maintain their pool. This doesn’t include replacing equipment or balancing chemicals.
What do you do first when filling a pool?
Before first filling a pool or adding substantial amounts of fresh water to the pool, either test the water using a good quality test kit or have it tested for pH, total alkalinity, calcium hardness and stain producing metals.
How do you maintain a pool at home?
Test pool water frequently and make any necessary adjustments for a clean, safe and easy to maintain swimming pool. Chlorine pool shock needs to be dissolved in a large bucket of water before it is added to the swimming pool. Always add chemicals to water when dissolving. NEVER add water to chemicals.
Can I fill my above ground pool overnight?
If necessary, clean the pool so that you will have clean water right from the start. When you are ready to begin adding water, make sure you start with a low pressure source such as a garden hose. It is never recommended to leave your home during this time or to fill your pool overnight.
