Table of Contents
How do I lock my Whirlpool oven?
How to Lock the Oven Door in a Whirlpool Super Capacity 465 Close the oven door completely. Turn the oven temperature knob clockwise until it reaches the “Clean” setting, if the 465 oven has a single-knob control. Press the “Auto Clean” button on the control pad if the 465 oven has the touch control panel.
How do I lock my oven door?
To set the oven Lock feature (instructions may vary by model – check your Owner’s Manual for more details): Press OFF and hold for 6 seconds. Lock will appear in the display, the door locked indicator light will flash, and the door lock will begin to close. Allow about 15 seconds for the oven door to lock.
How do you lock the door on a whirlpool gas oven?
Loc: Whirlpool oven error code “loc” indicates that the control lock setting is activated. This setting deactivates all oven controls and locks the door. To turn the control lock setting off, press and hold the START button for 3 seconds. If this doesn’t work, turn the oven off at the circuit breaker for 1 minute.
How do I lock my GE oven door?
Press the Self Clean pad. Close the oven door. Slide the latch to lock the oven door. Hit the Clear/Off or Cancel button immediately.
What does control lock mean on Whirlpool oven?
The lock feature shuts down the control pads (buttons) and locks the oven door to avoid unintended use of the oven. The lock feature is preset unlocked, but can be locked. If the oven is currently in use, the controls and oven door cannot be locked.
Why is there a lock on my oven?
Oven locks are a mechanical feature that allows you to secure your oven door. Typically the oven lock only really needs to be engaged if you don’t want young ones opening the door while the appliance is on or when the self-clean function is running to keep everyone safe from the extreme heat.
How long does oven stay locked after self clean?
A self-cleaning oven is designed with a mechanical interlock (patented in 1982) to keep the oven door locked and closed during and soon after the high-temperature cleaning cycle, which can be approximately three hours. The door stays locked to prevent burn injuries.
How do I unlock my Whirlpool oven door?
Whirlpool Oven Door is Locked – What Should I Do? Press Cancel/Off key to start a latch reset, wait 20-30 seconds and open door. Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on.
How do you stop a Whirlpool self-cleaning oven?
To cancel a self-cleaning oven cycle, press the keypad button marked cancel or off. This should immediately halt the cleaning cycle. Press the Timer button twice to stop this function, which can also read Timer Off or Timer Set/Off.
What does E2 F3 mean on Whirlpool?
An E0-F3 error indicates that the oven’s temperature sensor is open; E1-F3, that the temperature sensor is shorted; E2-F3, that the oven temperature has exceeded the maximum rated 575 degrees Fahrenheit in “Cook” mode; and E3-F3, that the oven temperature has exceeded the maximum rated 950 degrees Fahrenheit in “Clean” Sep 26, 2017.
Can you stop a self-cleaning oven in the middle?
You can stop a self-cleaning oven in the middle of its cleaning cycle. Press “Cancel” or “Clear/Off” to cancel the cycle. The “Stop” knob on mechanical timer models can be used to turn the oven off. If the cycle doesn’t stop, turn off the power to the range or oven at the house.
How do I turn off the control lock on my Whirlpool stove?
Press and hold the Options key for 3 seconds to turn off Control Lock.
What does control lock mean on a stove?
Per page 9 of the Use and Care Guide: The control lock locks the control panel keypads to avoid unintended use of the oven(s). If set before the power failure occurs, the CONTROL LOCK keypad will remain set after a power failure. The control lock is preset unlocked, but can be locked.
How do you manually unlock an oven door?
To unlock an oven, hold down the Lock button on your control panel for 2 or 3 seconds and wait for the oven to beep to indicate it’s unlocked. If this doesn’t work, unplug it from the electrical outlet and wait a few minutes. Then, plug it back in again, which may reset the temperature gauge and cause it to unlock.
Does a self-cleaning oven turn itself off?
The oven will turn off automatically when the cleaning cycle is over, but you won’t be able to open it until it cools down to regular baking temperatures. Wipe away ash residue with damp cloth.
How do I reset the touchscreen on my Whirlpool oven?
Cycle Power Sometimes the appliance just needs to be rebooted or restarted. Power the appliance down by turning off the circuit breaker(s) or unplugging for one (1) minute. Power the appliance up by turning on the circuit breaker(s) or plugging back in. Verify the operation of the control panel/display.
How do you unlock a Whirlpool stove top?
After connecting the appliance to an electrical power supply or after a power failure, the control panel will be locked. An indicator light above the key icon will be on. To unlock the control panel, press and hold CONTROL LOCK for 3 seconds. The indicator light will turn off, and the appliance is ready for use.
How do you unlock the touchscreen on a Whirlpool oven?
How do you gain access to the controls on an oven? Press and hold on to the lock for 3 seconds to lock the control panel. The light above the lock will turn on. Press and hold LOCK for 3 seconds to open the control panel.
